u-boot/board/aristainetos
Heiko Schocher c39fcad780 arm, imx6, aristainetos2: set gpr register after reset
setting the gpr 1,8 and 12 registers to a fix value.
This is needed because after a WDT reset, this registers
are not correct resettet, and prevent linux from booting
again.

Signed-off-by: Heiko Schocher <hs@denx.de>
2015-10-30 15:08:55 +01:00
..
aristainetos-v1.c imx: clock support enet2 anatop clock support 2015-09-02 15:29:14 +02:00
aristainetos-v2.c arm, imx6, aristainetos2: set gpr register after reset 2015-10-30 15:08:55 +01:00
aristainetos.c arm, imx6: add aristainetos 2b board version 2015-09-02 15:38:16 +02:00
aristainetos.cfg arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
aristainetos2.cfg arm, imx6: add support for aristainetos2 board 2015-05-26 14:18:11 +02:00
axi.cfg arm, imx6: add support for aristainetos2 board 2015-05-26 14:18:11 +02:00
clocks.cfg arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
clocks2.cfg arm, imx6: add support for aristainetos2 board 2015-05-26 14:18:11 +02:00
ddr-setup.cfg arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
ddr-setup2.cfg arm, imx6: add support for aristainetos2 board 2015-05-26 14:18:11 +02:00
Kconfig mx6: remove SYS_SOC from board Kconfig 2015-09-13 10:37:29 +02:00
MAINTAINERS imx6, aristaintetos2: add me as maintainer 2015-09-20 10:03:25 +02:00
Makefile arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
mt41j128M.cfg arm, imx6: add aristainetos board 2014-07-23 12:31:34 +02:00
nt5cc256m16cp.cfg arm, imx6: add support for aristainetos2 board 2015-05-26 14:18:11 +02:00