u-boot/board/birdland/bav335x
Tom Rini da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
..
board.c usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB 2015-08-05 17:20:34 +02:00
board.h bav335x: Update defconfigs and fix typo in EEPROM config format 2015-03-24 10:56:35 -04:00
Kconfig Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
MAINTAINERS Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
Makefile Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
mux.c Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
README Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
u-boot.lds Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00

Summary
=======

This document covers various features of the 'BAV335x' board build.
For more information about this board, visit http://birdland.com/oem


Hardware
========

The binary produced supports the bav335x Rev.A with 10/100 MB PHY
and Rev.B (default) with GB ethernet PHY.
If the BAV335x EEPROM is populated and programmed, the board will
automatically detect the version and extract proper serial# and
mac address from the EE.


Customization
=============

The following blocks are required:
- I2C, to talk with the PMIC and ensure that we do not run afoul of
  errata 1.0.24.

When removing options as part of customization,
CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your
needs and to remove no longer relevant options as in some cases we
define additional text blocks (such as for NAND or DFU strings).  Also
note that all of the SPL options are grouped together, rather than with
the IP blocks, so both areas will need their choices updated to reflect
the custom design.