u-boot/arch/x86/include/asm/speedstep.h
Simon Glass 18739e2ccc x86: Add Intel speedstep and turbo mode code
Intel chips have a turbo mode where they can run faster for a short period
until they reach thermal limits. Add code to adjust and query this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 06:34:02 -07:00

90 lines
2.9 KiB
C

/*
* From Coreboot file of same name
*
* Copyright (C) 2007-2009 coresystems GmbH
* 2012 secunet Security Networks AG
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _ASM_SPEEDSTEP_H
#define _ASM_SPEEDSTEP_H
/* Magic value used to locate speedstep configuration in the device tree */
#define SPEEDSTEP_APIC_MAGIC 0xACAC
/* MWAIT coordination I/O base address. This must match
* the \_PR_.CPU0 PM base address.
*/
#define PMB0_BASE 0x510
/* PMB1: I/O port that triggers SMI once cores are in the same state.
* See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
*/
#define PMB1_BASE 0x800
struct sst_state {
uint8_t dynfsb:1; /* whether this is SLFM */
uint8_t nonint:1; /* add .5 to ratio */
uint8_t ratio:6;
uint8_t vid;
uint8_t is_turbo;
uint8_t is_slfm;
uint32_t power;
};
#define SPEEDSTEP_RATIO_SHIFT 8
#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_VID_MASK 0x3f
#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((struct sst_state){ \
0, /* dynfsb won't be read. */ \
((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
>> SPEEDSTEP_RATIO_SHIFT), \
(val & mask) & SPEEDSTEP_VID_MASK, \
0, /* not turbo by default */ \
0, /* not slfm by default */ \
0 /* power is hardcoded in software. */ \
})
#define SPEEDSTEP_ENCODE_STATE(state) ( \
((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
((uint8_t)(state).ratio * 2) + (state).nonint)
struct sst_params {
struct sst_state slfm;
struct sst_state min;
struct sst_state max;
struct sst_state turbo;
};
/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
processor is 14, the lowest is always 6. This makes 5 states with the
minimal step width of 2. With turbo mode and super LFM we have at most 7. */
#define SPEEDSTEP_MAX_NORMAL_STATES 5
#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
struct sst_table {
/* Table of p-states for EMTTM and ACPI by decreasing performance. */
struct sst_state states[SPEEDSTEP_MAX_STATES];
int num_states;
};
void speedstep_gen_pstates(struct sst_table *);
#define SPEEDSTEP_MAX_POWER_YONAH 31000
#define SPEEDSTEP_MIN_POWER_YONAH 13100
#define SPEEDSTEP_MAX_POWER_MEROM 35000
#define SPEEDSTEP_MIN_POWER_MEROM 25000
#define SPEEDSTEP_SLFM_POWER_MEROM 12000
#define SPEEDSTEP_MAX_POWER_PENRYN 35000
#define SPEEDSTEP_MIN_POWER_PENRYN 15000
#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
#endif