u-boot/common/cmd_fdt.c
Joe Hershberger 0eb25b6196 common: Make sure arch-specific map_sysmem() is defined
In the case where the arch defines a custom map_sysmem(), make sure that
including just mapmem.h is sufficient to have these functions as they
are when the arch does not override it.

Also split the non-arch specific functions out of common.h

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:09 -06:00

1066 lines
26 KiB
C

/*
* (C) Copyright 2007
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
* Based on code written by:
* Pantelis Antoniou <pantelis.antoniou@gmail.com> and
* Matthew McClintock <msm@freescale.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <linux/ctype.h>
#include <linux/types.h>
#include <asm/global_data.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <mapmem.h>
#include <asm/io.h>
#define MAX_LEVEL 32 /* how deeply nested we will go */
#define SCRATCHPAD 1024 /* bytes of scratchpad memory */
#ifndef CONFIG_CMD_FDT_MAX_DUMP
#define CONFIG_CMD_FDT_MAX_DUMP 64
#endif
/*
* Global data (for the gd->bd)
*/
DECLARE_GLOBAL_DATA_PTR;
static int fdt_valid(struct fdt_header **blobp);
static int fdt_parse_prop(char *const*newval, int count, char *data, int *len);
static int fdt_print(const char *pathp, char *prop, int depth);
static int is_printable_string(const void *data, int len);
/*
* The working_fdt points to our working flattened device tree.
*/
struct fdt_header *working_fdt;
void set_working_fdt_addr(ulong addr)
{
void *buf;
buf = map_sysmem(addr, 0);
working_fdt = buf;
setenv_ulong("fdtaddr", addr);
}
/*
* Get a value from the fdt and format it to be set in the environment
*/
static int fdt_value_setenv(const void *nodep, int len, const char *var)
{
if (is_printable_string(nodep, len))
setenv(var, (void *)nodep);
else if (len == 4) {
char buf[11];
sprintf(buf, "0x%08X", *(uint32_t *)nodep);
setenv(var, buf);
} else if (len%4 == 0 && len <= 20) {
/* Needed to print things like sha1 hashes. */
char buf[41];
int i;
for (i = 0; i < len; i += sizeof(unsigned int))
sprintf(buf + (i * 2), "%08x",
*(unsigned int *)(nodep + i));
setenv(var, buf);
} else {
printf("error: unprintable value\n");
return 1;
}
return 0;
}
/*
* Flattened Device Tree command, see the help for parameter definitions.
*/
static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
/*
* Set the address of the fdt
*/
if (argv[1][0] == 'a') {
unsigned long addr;
int control = 0;
struct fdt_header *blob;
/*
* Set the address [and length] of the fdt.
*/
argc -= 2;
argv += 2;
/* Temporary #ifdef - some archs don't have fdt_blob yet */
#ifdef CONFIG_OF_CONTROL
if (argc && !strcmp(*argv, "-c")) {
control = 1;
argc--;
argv++;
}
#endif
if (argc == 0) {
if (control)
blob = (struct fdt_header *)gd->fdt_blob;
else
blob = working_fdt;
if (!blob || !fdt_valid(&blob))
return 1;
printf("The address of the fdt is %#08lx\n",
control ? (ulong)map_to_sysmem(blob) :
getenv_hex("fdtaddr", 0));
return 0;
}
addr = simple_strtoul(argv[0], NULL, 16);
blob = map_sysmem(addr, 0);
if (!fdt_valid(&blob))
return 1;
if (control)
gd->fdt_blob = blob;
else
set_working_fdt_addr(addr);
if (argc >= 2) {
int len;
int err;
/*
* Optional new length
*/
len = simple_strtoul(argv[1], NULL, 16);
if (len < fdt_totalsize(blob)) {
printf ("New length %d < existing length %d, "
"ignoring.\n",
len, fdt_totalsize(blob));
} else {
/*
* Open in place with a new length.
*/
err = fdt_open_into(blob, blob, len);
if (err != 0) {
printf ("libfdt fdt_open_into(): %s\n",
fdt_strerror(err));
}
}
}
return CMD_RET_SUCCESS;
}
if (!working_fdt) {
puts(
"No FDT memory address configured. Please configure\n"
"the FDT address via \"fdt addr <address>\" command.\n"
"Aborting!\n");
return CMD_RET_FAILURE;
}
/*
* Move the working_fdt
*/
if (strncmp(argv[1], "mo", 2) == 0) {
struct fdt_header *newaddr;
int len;
int err;
if (argc < 4)
return CMD_RET_USAGE;
/*
* Set the address and length of the fdt.
*/
working_fdt = (struct fdt_header *)simple_strtoul(argv[2], NULL, 16);
if (!fdt_valid(&working_fdt))
return 1;
newaddr = (struct fdt_header *)simple_strtoul(argv[3],NULL,16);
/*
* If the user specifies a length, use that. Otherwise use the
* current length.
*/
if (argc <= 4) {
len = fdt_totalsize(working_fdt);
} else {
len = simple_strtoul(argv[4], NULL, 16);
if (len < fdt_totalsize(working_fdt)) {
printf ("New length 0x%X < existing length "
"0x%X, aborting.\n",
len, fdt_totalsize(working_fdt));
return 1;
}
}
/*
* Copy to the new location.
*/
err = fdt_open_into(working_fdt, newaddr, len);
if (err != 0) {
printf ("libfdt fdt_open_into(): %s\n",
fdt_strerror(err));
return 1;
}
working_fdt = newaddr;
/*
* Make a new node
*/
} else if (strncmp(argv[1], "mk", 2) == 0) {
char *pathp; /* path */
char *nodep; /* new node to add */
int nodeoffset; /* node offset from libfdt */
int err;
/*
* Parameters: Node path, new node to be appended to the path.
*/
if (argc < 4)
return CMD_RET_USAGE;
pathp = argv[2];
nodep = argv[3];
nodeoffset = fdt_path_offset (working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
err = fdt_add_subnode(working_fdt, nodeoffset, nodep);
if (err < 0) {
printf ("libfdt fdt_add_subnode(): %s\n",
fdt_strerror(err));
return 1;
}
/*
* Set the value of a property in the working_fdt.
*/
} else if (argv[1][0] == 's') {
char *pathp; /* path */
char *prop; /* property */
int nodeoffset; /* node offset from libfdt */
static char data[SCRATCHPAD]; /* storage for the property */
int len; /* new length of the property */
int ret; /* return value */
/*
* Parameters: Node path, property, optional value.
*/
if (argc < 4)
return CMD_RET_USAGE;
pathp = argv[2];
prop = argv[3];
if (argc == 4) {
len = 0;
} else {
ret = fdt_parse_prop(&argv[4], argc - 4, data, &len);
if (ret != 0)
return ret;
}
nodeoffset = fdt_path_offset (working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
ret = fdt_setprop(working_fdt, nodeoffset, prop, data, len);
if (ret < 0) {
printf ("libfdt fdt_setprop(): %s\n", fdt_strerror(ret));
return 1;
}
/********************************************************************
* Get the value of a property in the working_fdt.
********************************************************************/
} else if (argv[1][0] == 'g') {
char *subcmd; /* sub-command */
char *pathp; /* path */
char *prop; /* property */
char *var; /* variable to store result */
int nodeoffset; /* node offset from libfdt */
const void *nodep; /* property node pointer */
int len = 0; /* new length of the property */
/*
* Parameters: Node path, property, optional value.
*/
if (argc < 5)
return CMD_RET_USAGE;
subcmd = argv[2];
if (argc < 6 && subcmd[0] != 's')
return CMD_RET_USAGE;
var = argv[3];
pathp = argv[4];
prop = argv[5];
nodeoffset = fdt_path_offset(working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) {
int reqIndex = -1;
int startDepth = fdt_node_depth(
working_fdt, nodeoffset);
int curDepth = startDepth;
int curIndex = -1;
int nextNodeOffset = fdt_next_node(
working_fdt, nodeoffset, &curDepth);
if (subcmd[0] == 'n')
reqIndex = simple_strtoul(argv[5], NULL, 16);
while (curDepth > startDepth) {
if (curDepth == startDepth + 1)
curIndex++;
if (subcmd[0] == 'n' && curIndex == reqIndex) {
const char *nodeName = fdt_get_name(
working_fdt, nextNodeOffset, NULL);
setenv(var, (char *)nodeName);
return 0;
}
nextNodeOffset = fdt_next_node(
working_fdt, nextNodeOffset, &curDepth);
if (nextNodeOffset < 0)
break;
}
if (subcmd[0] == 's') {
/* get the num nodes at this level */
setenv_ulong(var, curIndex + 1);
} else {
/* node index not found */
printf("libfdt node not found\n");
return 1;
}
} else {
nodep = fdt_getprop(
working_fdt, nodeoffset, prop, &len);
if (len == 0) {
/* no property value */
setenv(var, "");
return 0;
} else if (len > 0) {
if (subcmd[0] == 'v') {
int ret;
ret = fdt_value_setenv(nodep, len, var);
if (ret != 0)
return ret;
} else if (subcmd[0] == 'a') {
/* Get address */
char buf[11];
sprintf(buf, "0x%p", nodep);
setenv(var, buf);
} else if (subcmd[0] == 's') {
/* Get size */
char buf[11];
sprintf(buf, "0x%08X", len);
setenv(var, buf);
} else
return CMD_RET_USAGE;
return 0;
} else {
printf("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return 1;
}
}
/*
* Print (recursive) / List (single level)
*/
} else if ((argv[1][0] == 'p') || (argv[1][0] == 'l')) {
int depth = MAX_LEVEL; /* how deep to print */
char *pathp; /* path */
char *prop; /* property */
int ret; /* return value */
static char root[2] = "/";
/*
* list is an alias for print, but limited to 1 level
*/
if (argv[1][0] == 'l') {
depth = 1;
}
/*
* Get the starting path. The root node is an oddball,
* the offset is zero and has no name.
*/
if (argc == 2)
pathp = root;
else
pathp = argv[2];
if (argc > 3)
prop = argv[3];
else
prop = NULL;
ret = fdt_print(pathp, prop, depth);
if (ret != 0)
return ret;
/*
* Remove a property/node
*/
} else if (strncmp(argv[1], "rm", 2) == 0) {
int nodeoffset; /* node offset from libfdt */
int err;
/*
* Get the path. The root node is an oddball, the offset
* is zero and has no name.
*/
nodeoffset = fdt_path_offset (working_fdt, argv[2]);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
/*
* Do the delete. A fourth parameter means delete a property,
* otherwise delete the node.
*/
if (argc > 3) {
err = fdt_delprop(working_fdt, nodeoffset, argv[3]);
if (err < 0) {
printf("libfdt fdt_delprop(): %s\n",
fdt_strerror(err));
return err;
}
} else {
err = fdt_del_node(working_fdt, nodeoffset);
if (err < 0) {
printf("libfdt fdt_del_node(): %s\n",
fdt_strerror(err));
return err;
}
}
/*
* Display header info
*/
} else if (argv[1][0] == 'h') {
u32 version = fdt_version(working_fdt);
printf("magic:\t\t\t0x%x\n", fdt_magic(working_fdt));
printf("totalsize:\t\t0x%x (%d)\n", fdt_totalsize(working_fdt),
fdt_totalsize(working_fdt));
printf("off_dt_struct:\t\t0x%x\n",
fdt_off_dt_struct(working_fdt));
printf("off_dt_strings:\t\t0x%x\n",
fdt_off_dt_strings(working_fdt));
printf("off_mem_rsvmap:\t\t0x%x\n",
fdt_off_mem_rsvmap(working_fdt));
printf("version:\t\t%d\n", version);
printf("last_comp_version:\t%d\n",
fdt_last_comp_version(working_fdt));
if (version >= 2)
printf("boot_cpuid_phys:\t0x%x\n",
fdt_boot_cpuid_phys(working_fdt));
if (version >= 3)
printf("size_dt_strings:\t0x%x\n",
fdt_size_dt_strings(working_fdt));
if (version >= 17)
printf("size_dt_struct:\t\t0x%x\n",
fdt_size_dt_struct(working_fdt));
printf("number mem_rsv:\t\t0x%x\n",
fdt_num_mem_rsv(working_fdt));
printf("\n");
/*
* Set boot cpu id
*/
} else if (strncmp(argv[1], "boo", 3) == 0) {
unsigned long tmp = simple_strtoul(argv[2], NULL, 16);
fdt_set_boot_cpuid_phys(working_fdt, tmp);
/*
* memory command
*/
} else if (strncmp(argv[1], "me", 2) == 0) {
uint64_t addr, size;
int err;
addr = simple_strtoull(argv[2], NULL, 16);
size = simple_strtoull(argv[3], NULL, 16);
err = fdt_fixup_memory(working_fdt, addr, size);
if (err < 0)
return err;
/*
* mem reserve commands
*/
} else if (strncmp(argv[1], "rs", 2) == 0) {
if (argv[2][0] == 'p') {
uint64_t addr, size;
int total = fdt_num_mem_rsv(working_fdt);
int j, err;
printf("index\t\t start\t\t size\n");
printf("-------------------------------"
"-----------------\n");
for (j = 0; j < total; j++) {
err = fdt_get_mem_rsv(working_fdt, j, &addr, &size);
if (err < 0) {
printf("libfdt fdt_get_mem_rsv(): %s\n",
fdt_strerror(err));
return err;
}
printf(" %x\t%08x%08x\t%08x%08x\n", j,
(u32)(addr >> 32),
(u32)(addr & 0xffffffff),
(u32)(size >> 32),
(u32)(size & 0xffffffff));
}
} else if (argv[2][0] == 'a') {
uint64_t addr, size;
int err;
addr = simple_strtoull(argv[3], NULL, 16);
size = simple_strtoull(argv[4], NULL, 16);
err = fdt_add_mem_rsv(working_fdt, addr, size);
if (err < 0) {
printf("libfdt fdt_add_mem_rsv(): %s\n",
fdt_strerror(err));
return err;
}
} else if (argv[2][0] == 'd') {
unsigned long idx = simple_strtoul(argv[3], NULL, 16);
int err = fdt_del_mem_rsv(working_fdt, idx);
if (err < 0) {
printf("libfdt fdt_del_mem_rsv(): %s\n",
fdt_strerror(err));
return err;
}
} else {
/* Unrecognized command */
return CMD_RET_USAGE;
}
}
#ifdef CONFIG_OF_BOARD_SETUP
/* Call the board-specific fixup routine */
else if (strncmp(argv[1], "boa", 3) == 0) {
int err = ft_board_setup(working_fdt, gd->bd);
if (err) {
printf("Failed to update board information in FDT: %s\n",
fdt_strerror(err));
return CMD_RET_FAILURE;
}
}
#endif
#ifdef CONFIG_OF_SYSTEM_SETUP
/* Call the board-specific fixup routine */
else if (strncmp(argv[1], "sys", 3) == 0) {
int err = ft_system_setup(working_fdt, gd->bd);
if (err) {
printf("Failed to add system information to FDT: %s\n",
fdt_strerror(err));
return CMD_RET_FAILURE;
}
}
#endif
/* Create a chosen node */
else if (strncmp(argv[1], "cho", 3) == 0) {
unsigned long initrd_start = 0, initrd_end = 0;
if ((argc != 2) && (argc != 4))
return CMD_RET_USAGE;
if (argc == 4) {
initrd_start = simple_strtoul(argv[2], NULL, 16);
initrd_end = simple_strtoul(argv[3], NULL, 16);
}
fdt_chosen(working_fdt);
fdt_initrd(working_fdt, initrd_start, initrd_end);
#if defined(CONFIG_FIT_SIGNATURE)
} else if (strncmp(argv[1], "che", 3) == 0) {
int cfg_noffset;
int ret;
unsigned long addr;
struct fdt_header *blob;
if (!working_fdt)
return CMD_RET_FAILURE;
if (argc > 2) {
addr = simple_strtoul(argv[2], NULL, 16);
blob = map_sysmem(addr, 0);
} else {
blob = (struct fdt_header *)gd->fdt_blob;
}
if (!fdt_valid(&blob))
return 1;
gd->fdt_blob = blob;
cfg_noffset = fit_conf_get_node(working_fdt, NULL);
if (!cfg_noffset) {
printf("Could not find configuration node: %s\n",
fdt_strerror(cfg_noffset));
return CMD_RET_FAILURE;
}
ret = fit_config_verify(working_fdt, cfg_noffset);
if (ret == 0)
return CMD_RET_SUCCESS;
else
return CMD_RET_FAILURE;
#endif
}
/* resize the fdt */
else if (strncmp(argv[1], "re", 2) == 0) {
fdt_shrink_to_minimum(working_fdt);
}
else {
/* Unrecognized command */
return CMD_RET_USAGE;
}
return 0;
}
/****************************************************************************/
/**
* fdt_valid() - Check if an FDT is valid. If not, change it to NULL
*
* @blobp: Pointer to FDT pointer
* @return 1 if OK, 0 if bad (in which case *blobp is set to NULL)
*/
static int fdt_valid(struct fdt_header **blobp)
{
const void *blob = *blobp;
int err;
if (blob == NULL) {
printf ("The address of the fdt is invalid (NULL).\n");
return 0;
}
err = fdt_check_header(blob);
if (err == 0)
return 1; /* valid */
if (err < 0) {
printf("libfdt fdt_check_header(): %s", fdt_strerror(err));
/*
* Be more informative on bad version.
*/
if (err == -FDT_ERR_BADVERSION) {
if (fdt_version(blob) <
FDT_FIRST_SUPPORTED_VERSION) {
printf (" - too old, fdt %d < %d",
fdt_version(blob),
FDT_FIRST_SUPPORTED_VERSION);
}
if (fdt_last_comp_version(blob) >
FDT_LAST_SUPPORTED_VERSION) {
printf (" - too new, fdt %d > %d",
fdt_version(blob),
FDT_LAST_SUPPORTED_VERSION);
}
}
printf("\n");
*blobp = NULL;
return 0;
}
return 1;
}
/****************************************************************************/
/*
* Parse the user's input, partially heuristic. Valid formats:
* <0x00112233 4 05> - an array of cells. Numbers follow standard
* C conventions.
* [00 11 22 .. nn] - byte stream
* "string" - If the the value doesn't start with "<" or "[", it is
* treated as a string. Note that the quotes are
* stripped by the parser before we get the string.
* newval: An array of strings containing the new property as specified
* on the command line
* count: The number of strings in the array
* data: A bytestream to be placed in the property
* len: The length of the resulting bytestream
*/
static int fdt_parse_prop(char * const *newval, int count, char *data, int *len)
{
char *cp; /* temporary char pointer */
char *newp; /* temporary newval char pointer */
unsigned long tmp; /* holds converted values */
int stridx = 0;
*len = 0;
newp = newval[0];
/* An array of cells */
if (*newp == '<') {
newp++;
while ((*newp != '>') && (stridx < count)) {
/*
* Keep searching until we find that last ">"
* That way users don't have to escape the spaces
*/
if (*newp == '\0') {
newp = newval[++stridx];
continue;
}
cp = newp;
tmp = simple_strtoul(cp, &newp, 0);
*(__be32 *)data = __cpu_to_be32(tmp);
data += 4;
*len += 4;
/* If the ptr didn't advance, something went wrong */
if ((newp - cp) <= 0) {
printf("Sorry, I could not convert \"%s\"\n",
cp);
return 1;
}
while (*newp == ' ')
newp++;
}
if (*newp != '>') {
printf("Unexpected character '%c'\n", *newp);
return 1;
}
} else if (*newp == '[') {
/*
* Byte stream. Convert the values.
*/
newp++;
while ((stridx < count) && (*newp != ']')) {
while (*newp == ' ')
newp++;
if (*newp == '\0') {
newp = newval[++stridx];
continue;
}
if (!isxdigit(*newp))
break;
tmp = simple_strtoul(newp, &newp, 16);
*data++ = tmp & 0xFF;
*len = *len + 1;
}
if (*newp != ']') {
printf("Unexpected character '%c'\n", *newp);
return 1;
}
} else {
/*
* Assume it is one or more strings. Copy it into our
* data area for convenience (including the
* terminating '\0's).
*/
while (stridx < count) {
size_t length = strlen(newp) + 1;
strcpy(data, newp);
data += length;
*len += length;
newp = newval[++stridx];
}
}
return 0;
}
/****************************************************************************/
/*
* Heuristic to guess if this is a string or concatenated strings.
*/
static int is_printable_string(const void *data, int len)
{
const char *s = data;
/* zero length is not */
if (len == 0)
return 0;
/* must terminate with zero or '\n' */
if (s[len - 1] != '\0' && s[len - 1] != '\n')
return 0;
/* printable or a null byte (concatenated strings) */
while (((*s == '\0') || isprint(*s) || isspace(*s)) && (len > 0)) {
/*
* If we see a null, there are three possibilities:
* 1) If len == 1, it is the end of the string, printable
* 2) Next character also a null, not printable.
* 3) Next character not a null, continue to check.
*/
if (s[0] == '\0') {
if (len == 1)
return 1;
if (s[1] == '\0')
return 0;
}
s++;
len--;
}
/* Not the null termination, or not done yet: not printable */
if (*s != '\0' || (len != 0))
return 0;
return 1;
}
/*
* Print the property in the best format, a heuristic guess. Print as
* a string, concatenated strings, a byte, word, double word, or (if all
* else fails) it is printed as a stream of bytes.
*/
static void print_data(const void *data, int len)
{
int j;
/* no data, don't print */
if (len == 0)
return;
/*
* It is a string, but it may have multiple strings (embedded '\0's).
*/
if (is_printable_string(data, len)) {
puts("\"");
j = 0;
while (j < len) {
if (j > 0)
puts("\", \"");
puts(data);
j += strlen(data) + 1;
data += strlen(data) + 1;
}
puts("\"");
return;
}
if ((len %4) == 0) {
if (len > CONFIG_CMD_FDT_MAX_DUMP)
printf("* 0x%p [0x%08x]", data, len);
else {
const __be32 *p;
printf("<");
for (j = 0, p = data; j < len/4; j++)
printf("0x%08x%s", fdt32_to_cpu(p[j]),
j < (len/4 - 1) ? " " : "");
printf(">");
}
} else { /* anything else... hexdump */
if (len > CONFIG_CMD_FDT_MAX_DUMP)
printf("* 0x%p [0x%08x]", data, len);
else {
const u8 *s;
printf("[");
for (j = 0, s = data; j < len; j++)
printf("%02x%s", s[j], j < len - 1 ? " " : "");
printf("]");
}
}
}
/****************************************************************************/
/*
* Recursively print (a portion of) the working_fdt. The depth parameter
* determines how deeply nested the fdt is printed.
*/
static int fdt_print(const char *pathp, char *prop, int depth)
{
static char tabs[MAX_LEVEL+1] =
"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t"
"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t";
const void *nodep; /* property node pointer */
int nodeoffset; /* node offset from libfdt */
int nextoffset; /* next node offset from libfdt */
uint32_t tag; /* tag */
int len; /* length of the property */
int level = 0; /* keep track of nesting level */
const struct fdt_property *fdt_prop;
nodeoffset = fdt_path_offset (working_fdt, pathp);
if (nodeoffset < 0) {
/*
* Not found or something else bad happened.
*/
printf ("libfdt fdt_path_offset() returned %s\n",
fdt_strerror(nodeoffset));
return 1;
}
/*
* The user passed in a property as well as node path.
* Print only the given property and then return.
*/
if (prop) {
nodep = fdt_getprop (working_fdt, nodeoffset, prop, &len);
if (len == 0) {
/* no property value */
printf("%s %s\n", pathp, prop);
return 0;
} else if (len > 0) {
printf("%s = ", prop);
print_data (nodep, len);
printf("\n");
return 0;
} else {
printf ("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return 1;
}
}
/*
* The user passed in a node path and no property,
* print the node and all subnodes.
*/
while(level >= 0) {
tag = fdt_next_tag(working_fdt, nodeoffset, &nextoffset);
switch(tag) {
case FDT_BEGIN_NODE:
pathp = fdt_get_name(working_fdt, nodeoffset, NULL);
if (level <= depth) {
if (pathp == NULL)
pathp = "/* NULL pointer error */";
if (*pathp == '\0')
pathp = "/"; /* root is nameless */
printf("%s%s {\n",
&tabs[MAX_LEVEL - level], pathp);
}
level++;
if (level >= MAX_LEVEL) {
printf("Nested too deep, aborting.\n");
return 1;
}
break;
case FDT_END_NODE:
level--;
if (level <= depth)
printf("%s};\n", &tabs[MAX_LEVEL - level]);
if (level == 0) {
level = -1; /* exit the loop */
}
break;
case FDT_PROP:
fdt_prop = fdt_offset_ptr(working_fdt, nodeoffset,
sizeof(*fdt_prop));
pathp = fdt_string(working_fdt,
fdt32_to_cpu(fdt_prop->nameoff));
len = fdt32_to_cpu(fdt_prop->len);
nodep = fdt_prop->data;
if (len < 0) {
printf ("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return 1;
} else if (len == 0) {
/* the property has no value */
if (level <= depth)
printf("%s%s;\n",
&tabs[MAX_LEVEL - level],
pathp);
} else {
if (level <= depth) {
printf("%s%s = ",
&tabs[MAX_LEVEL - level],
pathp);
print_data (nodep, len);
printf(";\n");
}
}
break;
case FDT_NOP:
printf("%s/* NOP */\n", &tabs[MAX_LEVEL - level]);
break;
case FDT_END:
return 1;
default:
if (level <= depth)
printf("Unknown tag 0x%08X\n", tag);
return 1;
}
nodeoffset = nextoffset;
}
return 0;
}
/********************************************************************/
#ifdef CONFIG_SYS_LONGHELP
static char fdt_help_text[] =
"addr [-c] <addr> [<length>] - Set the [control] fdt location to <addr>\n"
#ifdef CONFIG_OF_BOARD_SETUP
"fdt boardsetup - Do board-specific set up\n"
#endif
#ifdef CONFIG_OF_SYSTEM_SETUP
"fdt systemsetup - Do system-specific set up\n"
#endif
"fdt move <fdt> <newaddr> <length> - Copy the fdt to <addr> and make it active\n"
"fdt resize - Resize fdt to size + padding to 4k addr\n"
"fdt print <path> [<prop>] - Recursive print starting at <path>\n"
"fdt list <path> [<prop>] - Print one level starting at <path>\n"
"fdt get value <var> <path> <prop> - Get <property> and store in <var>\n"
"fdt get name <var> <path> <index> - Get name of node <index> and store in <var>\n"
"fdt get addr <var> <path> <prop> - Get start address of <property> and store in <var>\n"
"fdt get size <var> <path> [<prop>] - Get size of [<property>] or num nodes and store in <var>\n"
"fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n"
"fdt mknode <path> <node> - Create a new node after <path>\n"
"fdt rm <path> [<prop>] - Delete the node or <property>\n"
"fdt header - Display header info\n"
"fdt bootcpu <id> - Set boot cpuid\n"
"fdt memory <addr> <size> - Add/Update memory node\n"
"fdt rsvmem print - Show current mem reserves\n"
"fdt rsvmem add <addr> <size> - Add a mem reserve\n"
"fdt rsvmem delete <index> - Delete a mem reserves\n"
"fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n"
" <start>/<end> - initrd start/end addr\n"
#if defined(CONFIG_FIT_SIGNATURE)
"fdt checksign [<addr>] - check FIT signature\n"
" <start> - addr of key blob\n"
" default gd->fdt_blob\n"
#endif
"NOTE: Dereference aliases by omiting the leading '/', "
"e.g. fdt print ethernet0.";
#endif
U_BOOT_CMD(
fdt, 255, 0, do_fdt,
"flattened device tree utility commands", fdt_help_text
);