u-boot/board/lwmon5
Wolfgang Denk 64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
..
config.mk [ppc4xx] Add initial lwmon5 board support 2007-06-15 08:18:01 +02:00
init.S ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore 2008-01-09 10:28:20 +01:00
kbd.c ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) 2007-08-21 16:27:57 +02:00
lwmon5.c ppc4xx: Rework Lime support for lwmon5 2008-01-11 15:51:42 +01:00
Makefile ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based) 2007-08-21 16:27:57 +02:00
sdram.c PPC4xx: Use common code for LWMON5 board SDRAM support 2008-01-04 11:37:43 +01:00
u-boot.lds Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections 2008-01-12 20:31:39 +01:00