u-boot/examples/test_burst.c
Wolfgang Denk 9b55a25369 Fix some more print() format errors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-11 01:16:00 +02:00

320 lines
7.4 KiB
C

/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* The test exercises SDRAM accesses in burst mode
*/
#include <common.h>
#include <exports.h>
#include <commproc.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <serial.h>
#include <watchdog.h>
#include "test_burst.h"
/* 8 MB test region of physical RAM */
#define TEST_PADDR 0x00800000
/* The uncached virtual region */
#define TEST_VADDR_NC 0x00800000
/* The cached virtual region */
#define TEST_VADDR_C 0x01000000
/* When an error is detected, the address where the error has been found,
and also the current and the expected data will be written to
the following flash address
*/
#define TEST_FLASH_ADDR 0x40100000
/* Define GPIO ports to signal start of burst transfers and errors */
#ifdef CONFIG_LWMON
/* Use PD.8 to signal start of burst transfers */
#define GPIO1_DAT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
#define GPIO1_BIT 0x0080
/* Configure PD.8 as general purpose output */
#define GPIO1_INIT \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |= GPIO1_BIT;
/* Use PD.9 to signal error */
#define GPIO2_DAT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
#define GPIO2_BIT 0x0040
/* Configure PD.9 as general purpose output */
#define GPIO2_INIT \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |= GPIO2_BIT;
#endif /* CONFIG_LWMON */
static void test_prepare (void);
static int test_burst_start (unsigned long size, unsigned long pattern);
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached);
static int test_mmu_is_on(void);
static void test_desc(unsigned long size);
static void test_error(char * step, volatile void * addr, unsigned long val, unsigned long pattern);
static void signal_init(void);
static void signal_start(void);
static void signal_error(void);
static void test_usage(void);
static unsigned long test_pattern [] = {
0x00000000,
0xffffffff,
0x55555555,
0xaaaaaaaa,
};
int test_burst (int argc, char *argv[])
{
unsigned long size = CACHE_LINE_SIZE;
unsigned int pass = 0;
int res = 0;
int i, j;
if (argc == 3) {
char * d;
for (size = 0, d = argv[1]; *d >= '0' && *d <= '9'; d++) {
size *= 10;
size += *d - '0';
}
if (size == 0 || *d) {
test_usage();
return 1;
}
for (d = argv[2]; *d >= '0' && *d <= '9'; d++) {
pass *= 10;
pass += *d - '0';
}
if (*d) {
test_usage();
return 1;
}
} else if (argc > 3) {
test_usage();
return 1;
}
size += (CACHE_LINE_SIZE - 1);
size &= ~(CACHE_LINE_SIZE - 1);
if (!test_mmu_is_on()) {
test_prepare();
}
test_desc(size);
for (j = 0; !pass || j < pass; j++) {
for (i = 0; i < sizeof(test_pattern) / sizeof(test_pattern[0]);
i++) {
res = test_burst_start(size, test_pattern[i]);
if (res != 0) {
goto Done;
}
}
printf ("Iteration #%d passed\n", j + 1);
if (tstc() && 0x03 == getc())
break;
}
Done:
return res;
}
static void test_prepare (void)
{
printf ("\n");
caches_init();
disable_interrupts();
mmu_init();
printf ("Interrupts are disabled\n");
printf ("I-Cache is ON\n");
printf ("D-Cache is ON\n");
printf ("MMU is ON\n");
printf ("\n");
test_map_8M (TEST_PADDR, TEST_VADDR_NC, 0);
test_map_8M (TEST_PADDR, TEST_VADDR_C, 1);
test_map_8M (TEST_FLASH_ADDR & 0xFF800000, TEST_FLASH_ADDR & 0xFF800000, 0);
/* Configure GPIO ports */
signal_init();
}
static int test_burst_start (unsigned long size, unsigned long pattern)
{
volatile unsigned long * vaddr_c = (unsigned long *)TEST_VADDR_C;
volatile unsigned long * vaddr_nc = (unsigned long *)TEST_VADDR_NC;
int i, n;
int res = 1;
printf ("Test pattern %08lx ...", pattern);
n = size / 4;
for (i = 0; i < n; i ++) {
vaddr_c [i] = pattern;
}
signal_start();
flush_dcache_range((unsigned long)vaddr_c, (unsigned long)(vaddr_c + n) - 1);
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("2a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("2b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
vaddr_nc [i] = pattern;
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("3a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
signal_start();
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("3b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
res = 0;
Done:
printf(" %s\n", res == 0 ? "OK" : "");
return res;
}
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached)
{
mtspr (MD_EPN, (vaddr & 0xFFFFFC00) | MI_EVALID);
mtspr (MD_TWC, MI_PS8MEG | MI_SVALID);
mtspr (MD_RPN, (paddr & 0xFFFFF000) | MI_BOOTINIT | (cached ? 0 : 2));
mtspr (MD_AP, MI_Kp);
}
static int test_mmu_is_on(void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr & MSR_DR;
}
static void test_desc(unsigned long size)
{
printf(
"The following tests will be conducted:\n"
"1) Map %ld-byte region of physical RAM at 0x%08x\n"
" into two virtual regions:\n"
" one cached at 0x%08x and\n"
" the the other uncached at 0x%08x.\n",
size, TEST_PADDR, TEST_VADDR_NC, TEST_VADDR_C);
puts(
"2) Fill the cached region with a pattern, and flush the cache\n"
"2a) Check the uncached region to match the pattern\n"
"2b) Check the cached region to match the pattern\n"
"3) Fill the uncached region with a pattern\n"
"3a) Check the cached region to match the pattern\n"
"3b) Check the uncached region to match the pattern\n"
"2b) Change the patterns and go to step 2\n"
"\n"
);
}
static void test_error(
char * step, volatile void * addr, unsigned long val, unsigned long pattern)
{
volatile unsigned long * p = (void *)TEST_FLASH_ADDR;
signal_error();
p[0] = (unsigned long)addr;
p[1] = val;
p[2] = pattern;
printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx",
step, (unsigned long)addr, val, pattern);
}
static void signal_init(void)
{
#if defined(GPIO1_INIT)
GPIO1_INIT;
#endif
#if defined(GPIO2_INIT)
GPIO2_INIT;
#endif
}
static void signal_start(void)
{
#if defined(GPIO1_INIT)
if (GPIO1_DAT & GPIO1_BIT) {
GPIO1_DAT &= ~GPIO1_BIT;
} else {
GPIO1_DAT |= GPIO1_BIT;
}
#endif
}
static void signal_error(void)
{
#if defined(GPIO2_INIT)
if (GPIO2_DAT & GPIO2_BIT) {
GPIO2_DAT &= ~GPIO2_BIT;
} else {
GPIO2_DAT |= GPIO2_BIT;
}
#endif
}
static void test_usage(void)
{
printf("Usage: go 0x40004 [size] [count]\n");
}