u-boot/drivers/fpga/altera.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

228 lines
5.4 KiB
C

/*
* (C) Copyright 2003
* Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Altera FPGA support
*/
#include <common.h>
#include <ACEX1K.h>
#include <stratixII.h>
/* Define FPGA_DEBUG to get debug printf's */
/* #define FPGA_DEBUG */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, const char *fn);
/* ------------------------------------------------------------------------- */
int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
#elif defined(CONFIG_FPGA_CYCLON2)
PRINTF ("%s: Launching the CYCLONE II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Loader...\n",
__FUNCTION__);
ret_val = StratixII_load (desc, buf, bsize);
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Reader...\n",
__FUNCTION__);
ret_val = StratixII_dump (desc, buf, bsize);
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
case Altera_CYC2:
printf ("CYCLON II\n");
break;
case Altera_StratixII:
printf ("Stratix II\n");
break;
/* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
}
printf ("Interface type:\t");
switch (desc->iface) {
case passive_serial:
printf ("Passive Serial (PS)\n");
break;
case passive_parallel_synchronous:
printf ("Passive Parallel Synchronous (PPS)\n");
break;
case passive_parallel_asynchronous:
printf ("Passive Parallel Asynchronous (PPA)\n");
break;
case passive_serial_asynchronous:
printf ("Passive Serial Asynchronous (PSA)\n");
break;
case altera_jtag_mode: /* Not used */
printf ("JTAG Mode\n");
break;
case fast_passive_parallel:
printf ("Fast Passive Parallel (FPP)\n");
break;
case fast_passive_parallel_security:
printf
("Fast Passive Parallel with Security (FPPS) \n");
break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
}
printf ("Device Size: \t%d bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
StratixII_info (desc);
break;
#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
break;
}
} else {
printf ("No Device Function Table.\n");
}
ret_val = FPGA_SUCCESS;
} else {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
static int altera_validate (Altera_desc * desc, const char *fn)
{
int ret_val = false;
if (desc) {
if ((desc->family > min_altera_type) &&
(desc->family < max_altera_type)) {
if ((desc->iface > min_altera_iface_type) &&
(desc->iface < max_altera_iface_type)) {
if (desc->size) {
ret_val = true;
} else {
printf ("%s: NULL part size\n", fn);
}
} else {
printf ("%s: Invalid Interface type, %d\n",
fn, desc->iface);
}
} else {
printf ("%s: Invalid family type, %d\n", fn, desc->family);
}
} else {
printf ("%s: NULL descriptor!\n", fn);
}
return ret_val;
}
/* ------------------------------------------------------------------------- */