u-boot

History

Masahiro Yamada 1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>		2016-09-23 17:55:42 -04:00
..
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	MAINTAINERS/mailmap: Update my email address	2016-01-11 11:22:43 -05:00
Makefile	mx6: Add initial SPL support for HummingBoard-i2eX	2015-04-22 14:39:06 +02:00
README	Use correct spelling of "U-Boot"	2016-02-06 12:00:59 +01:00
mx6cuboxi.c	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00

README

How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-Boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.