u-boot/board/lwmon/flash.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

633 lines
15 KiB
C

/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* #define DEBUG */
#include <common.h>
#include <mpc8xx.h>
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
# endif
# ifndef CONFIG_ENV_SECT_SIZE
# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
# endif
#endif
/*---------------------------------------------------------------------*/
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_data (flash_info_t *info, ulong dest, ulong data);
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
static int write_data_buf (flash_info_t * info, ulong dest, uchar * cp, int len);
#endif
static void flash_get_offsets (ulong base, flash_info_t *info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0: "
"ID 0x%lx, Size = 0x%08lx = %ld MB\n",
flash_info[0].flash_id,
size_b0, size_b0<<20);
}
debug ("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
debug ("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
if (size_b1 > size_b0) {
printf ("## ERROR: "
"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
size_b1, size_b1<<20,
size_b0, size_b0<<20
);
flash_info[0].flash_id = FLASH_UNKNOWN;
flash_info[1].flash_id = FLASH_UNKNOWN;
flash_info[0].sector_count = -1;
flash_info[1].sector_count = -1;
flash_info[0].size = 0;
flash_info[1].size = 0;
return (0);
}
debug ("## Before remap: "
"BR0: 0x%08x OR0: 0x%08x "
"BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br0, memctl->memc_or0,
memctl->memc_br1, memctl->memc_or1);
/* Remap FLASH according to real size */
memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
OR_CSNT_SAM | OR_ACS_DIV1;
memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V;
debug ("## BR0: 0x%08x OR0: 0x%08x\n",
memctl->memc_br0, memctl->memc_or0);
/* Re-do sizing to get full correct info */
size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
flash_info[0].size = size_b0;
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
if (size_b1) {
memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
OR_CSNT_SAM | OR_ACS_DIV1;
memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
BR_PS_32 | BR_V;
debug ("## BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br1, memctl->memc_or1);
/* Re-do sizing to get full correct info */
size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
&flash_info[1]);
flash_info[1].size = size_b1;
flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[1]);
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
&flash_info[1]);
#endif
} else {
memctl->memc_br1 = 0; /* invalidate bank */
memctl->memc_or1 = 0; /* invalidate bank */
debug ("## DISABLE BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br1, memctl->memc_or1);
flash_info[1].flash_id = FLASH_UNKNOWN;
flash_info[1].sector_count = -1;
flash_info[1].size = 0;
}
debug ("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
return (size_b0 + size_b1);
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base;
base += 0x00020000 * 2; /* 128k * 2 chips per bank */
}
return;
default:
printf ("Don't know sector ofsets for flash type 0x%lx\n",
info->flash_id);
return;
}
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_STM: printf ("STM "); break;
case FLASH_MAN_INTEL: printf ("Intel "); break;
case FLASH_MAN_MT: printf ("MT "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F320J3A: printf ("28F320J3A (32Mbit = 128K x 32)\n");
break;
case FLASH_28F640J3A: printf ("28F640J3A (64Mbit = 128K x 64)\n");
break;
case FLASH_28F128J3A: printf ("28F128J3A (128Mbit = 128K x 128)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
if (info->size >= (1 << 20)) {
i = 20;
} else {
i = 10;
}
printf (" Size: %ld %cB in %d Sectors\n",
info->size >> i,
(i == 20) ? 'M' : 'k',
info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
return;
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
{
ulong value;
/* Read Manufacturer ID */
addr[0] = 0x00900090;
value = addr[0];
debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
switch (value) {
case AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
case SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
case STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
case INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
addr[0] = 0x00FF00FF; /* restore read mode */
return (0); /* no or unknown flash */
}
value = addr[1]; /* device ID */
debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
switch (value) {
case INTEL_ID_28F320J3A:
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000 * 2;
break; /* => 8 MB */
case INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000 * 2;
break; /* => 16 MB */
case INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000 * 2;
break; /* => 32 MB */
default:
info->flash_id = FLASH_UNKNOWN;
addr[0] = 0x00FF00FF; /* restore read mode */
return (0); /* => no or unknown flash */
}
if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = 0x00FF00FF; /* restore read mode */
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
int flag, prot, sect;
ulong start, now, last;
debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
printf ("Can erase only Intel flash types - aborted\n");
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
start = get_timer (0);
last = start;
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
vu_long *addr = (vu_long *)(info->start[sect]);
unsigned long status;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
*addr = 0x00600060; /* clear lock bit setup */
*addr = 0x00D000D0; /* clear lock bit confirm */
udelay (1000);
/* This takes awfully long - up to 50 ms and more */
while (((status = *addr) & 0x00800080) != 0x00800080) {
if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0x00FF00FF; /* reset to read mode */
return 1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
udelay (1000); /* to trigger the watchdog */
}
*addr = 0x00500050; /* clear status register */
*addr = 0x00200020; /* erase setup */
*addr = 0x00D000D0; /* erase confirm */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((status = *addr) & 0x00800080) != 0x00800080) {
if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0x00B000B0; /* suspend erase */
*addr = 0x00FF00FF; /* reset to read mode */
return 1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
udelay (1000); /* to trigger the watchdog */
}
*addr = 0x00FF00FF; /* reset to read mode */
}
}
printf (" done\n");
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
#define FLASH_WIDTH 4 /* flash bus width in bytes */
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
if (info->flash_id == FLASH_UNKNOWN) {
return 4;
}
wp = (addr & ~(FLASH_WIDTH-1)); /* get lower FLASH_WIDTH aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
for (; i<FLASH_WIDTH && cnt>0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
if ((rc = write_data(info, wp, data)) != 0) {
return (rc);
}
wp += FLASH_WIDTH;
}
/*
* handle FLASH_WIDTH aligned part
*/
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
while(cnt >= FLASH_WIDTH) {
i = CONFIG_SYS_FLASH_BUFFER_SIZE > cnt ?
(cnt & ~(FLASH_WIDTH - 1)) : CONFIG_SYS_FLASH_BUFFER_SIZE;
if((rc = write_data_buf(info, wp, src,i)) != 0)
return rc;
wp += i;
src += i;
cnt -=i;
}
#else
while (cnt >= FLASH_WIDTH) {
data = 0;
for (i=0; i<FLASH_WIDTH; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_data(info, wp, data)) != 0) {
return (rc);
}
wp += FLASH_WIDTH;
cnt -= FLASH_WIDTH;
}
#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i<FLASH_WIDTH; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
return (write_data(info, wp, data));
}
/*-----------------------------------------------------------------------
* Check flash status, returns:
* 0 - OK
* 1 - timeout
*/
static int flash_status_check(vu_long *addr, ulong tout, char * prompt)
{
ulong status;
ulong start;
/* Wait for command completion */
start = get_timer (0);
while(((status = *addr) & 0x00800080) != 0x00800080) {
if (get_timer(start) > tout) {
printf("Flash %s timeout at address %p\n", prompt, addr);
*addr = 0x00FF00FF; /* restore read mode */
return (1);
}
}
return 0;
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_data (flash_info_t *info, ulong dest, ulong data)
{
vu_long *addr = (vu_long *)dest;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
*addr = 0x00400040; /* write setup */
*addr = data;
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
if (flash_status_check(addr, CONFIG_SYS_FLASH_WRITE_TOUT, "write") != 0) {
return (1);
}
*addr = 0x00FF00FF; /* restore read mode */
return (0);
}
#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*-----------------------------------------------------------------------
* Write a buffer to Flash, returns:
* 0 - OK
* 1 - write timeout
*/
static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len)
{
vu_long *addr = (vu_long *)dest;
int sector;
int cnt;
int retcode;
vu_long * src = (vu_long *)cp;
vu_long * dst = (vu_long *)dest;
/* find sector */
for(sector = info->sector_count - 1; sector >= 0; sector--) {
if(dest >= info->start[sector])
break;
}
*addr = 0x00500050; /* clear status */
*addr = 0x00e800e8; /* write buffer */
if((retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
"write to buffer")) == 0) {
cnt = len / FLASH_WIDTH;
*addr = (cnt-1) | ((cnt-1) << 16);
while(cnt-- > 0) {
*dst++ = *src++;
}
*addr = 0x00d000d0; /* write buffer confirm */
retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
"buffer write");
}
*addr = 0x00FF00FF; /* restore read mode */
*addr = 0x00500050; /* clear status */
return retcode;
}
#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
/*-----------------------------------------------------------------------
*/