u-boot/board/sc3/sc3nand.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

75 lines
1.8 KiB
C

/*
* (C) Copyright 2007
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <asm/processor.h>
#define readb(addr) *(volatile u_char *)(addr)
#define readl(addr) *(volatile u_long *)(addr)
#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
#define SC3_NAND_ALE 29 /* GPIO PIN 3 */
#define SC3_NAND_CLE 30 /* GPIO PIN 2 */
#define SC3_NAND_CE 27 /* GPIO PIN 5 */
static void *sc3_io_base;
static void *sc3_control_base = (void *)0xEF600700;
static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_CLE )
set_bit (SC3_NAND_CLE, sc3_control_base);
else
clear_bit (SC3_NAND_CLE, sc3_control_base);
if ( ctrl & NAND_ALE )
set_bit (SC3_NAND_ALE, sc3_control_base);
else
clear_bit (SC3_NAND_ALE, sc3_control_base);
if ( ctrl & NAND_NCE )
set_bit (SC3_NAND_CE, sc3_control_base);
else
clear_bit (SC3_NAND_CE, sc3_control_base);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static int sc3_nand_dev_ready(struct mtd_info *mtd)
{
if (!(readl(sc3_control_base + 0x1C) & 0x4000))
return 0;
return 1;
}
static void sc3_select_chip(struct mtd_info *mtd, int chip)
{
clear_bit (SC3_NAND_CE, sc3_control_base);
}
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
sc3_io_base = (void *) CONFIG_SYS_NAND_BASE;
/* Set address of NAND IO lines (Using Linear Data Access Region) */
nand->IO_ADDR_R = (void __iomem *) sc3_io_base;
nand->IO_ADDR_W = (void __iomem *) sc3_io_base;
/* Reference hardware control function */
nand->cmd_ctrl = sc3_nand_hwcontrol;
nand->dev_ready = sc3_nand_dev_ready;
nand->select_chip = sc3_select_chip;
return 0;
}
#endif