u-boot/board/spd8xx/spd8xx.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

279 lines
7.2 KiB
C

/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
#include <commproc.h>
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sharc_table[] = {
/*
* Single Read. (Offset 0 in UPM RAM)
*/
0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
0xFFFFEC05, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Read. (Offset 8 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPM RAM)
*/
0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
0xFFFFEC05, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPM RAM)
*/
/* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPM RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
const uint sdram_table[] = {
/*
* Single Read. (Offset 0 in UPM RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, /* last */
/*
* SDRAM Initialization (offset 5 in UPM RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPM RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPM RAM)
*/
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPM RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPM RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPM RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
*/
int checkboard (void)
{
puts ("Board: SPD823TS\n");
return (0);
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0;
#if 0
/*
* Map controller bank 2 to the SRAM bank at preliminary address.
*/
memctl->memc_or2 = CONFIG_SYS_OR2;
memctl->memc_br2 = CONFIG_SYS_BR2;
#endif
/*
* Map controller bank 4 to the PER8 bank.
*/
memctl->memc_or4 = CONFIG_SYS_OR4;
memctl->memc_br4 = CONFIG_SYS_BR4;
#if 0
/* Configure SHARC at UMA */
upmconfig (UPMA, (uint *) sharc_table,
sizeof (sharc_table) / sizeof (uint));
/* Map controller bank 5 to the SHARC */
memctl->memc_or5 = CONFIG_SYS_OR5;
memctl->memc_br5 = CONFIG_SYS_BR5;
#endif
memctl->memc_mamr = 0x00001000;
/* Configure SDRAM at UMB */
upmconfig (UPMB, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */
udelay (200);
memctl->memc_mcr = 0x80806105;
udelay (1);
memctl->memc_mcr = 0x80806130;
udelay (1);
memctl->memc_mcr = 0x80806130;
udelay (1);
memctl->memc_mcr = 0x80806106;
memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 =
dram_size (CONFIG_SYS_MBMR_8COL, SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mbmr = mamr_value;
return (get_ram_size (base, maxsize));
}
/* ------------------------------------------------------------------------- */
void reset_phy (void)
{
immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
ushort sreg;
/* Configure extra port pins for NS DP83843 PHY */
immr->im_ioport.iop_papar &= ~(PA_ENET_MDC | PA_ENET_MDIO);
sreg = immr->im_ioport.iop_padir;
sreg |= PA_ENET_MDC; /* Mgmt. Data Clock is Output */
sreg &= ~(PA_ENET_MDIO); /* Mgmt. Data I/O is bidirect. => Input */
immr->im_ioport.iop_padir = sreg;
immr->im_ioport.iop_padat &= ~(PA_ENET_MDC); /* set MDC = 0 */
/*
* RESET in implemented by a positive pulse of at least 1 us
* at the reset pin.
*
* Configure RESET pins for NS DP83843 PHY, and RESET chip.
*
* Note: The RESET pin is high active, but there is an
* inverter on the SPD823TS board...
*/
immr->im_ioport.iop_pcpar &= ~(PC_ENET_RESET);
immr->im_ioport.iop_pcdir |= PC_ENET_RESET;
/* assert RESET signal of PHY */
immr->im_ioport.iop_pcdat &= ~(PC_ENET_RESET);
udelay (10);
/* de-assert RESET signal of PHY */
immr->im_ioport.iop_pcdat |= PC_ENET_RESET;
udelay (10);
}
/* ------------------------------------------------------------------------- */
void ide_set_reset (int on)
{
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Configure PC for IDE Reset Pin
*/
if (on) { /* assert RESET */
immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
} else { /* release RESET */
immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
}
/* program port pin as GPIO output */
immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET);
immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET);
immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET;
}
/* ------------------------------------------------------------------------- */