u-boot/arch/arm/cpu/tegra-common/ap.c
Bryan Wu df3443dfa4 ARM: tegra: Disable VPR
On Tegra114 and Tegra124 platforms, certain display-related registers cannot
be accessed unless the VPR registers are programmed.  For bootloader, we
probably don't care about VPR, so we disable it (which counts as programming
it, and allows those display-related registers to be accessed).

This patch is based on the commit 5f499646c83ba08079f3fdff6591f638a0ce4c0c
in Chromium OS U-Boot project.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
[acourbot: ensure write went through, vpr.c style changes]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <TWarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Terje Bergstrom <tbergstrom@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-18 16:57:02 -07:00

170 lines
3.6 KiB
C

/*
* (C) Copyright 2010-2014
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/* Tegra AP (Application Processor) code */
#include <common.h>
#include <asm/io.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch-tegra/ap.h>
#include <asm/arch-tegra/clock.h>
#include <asm/arch-tegra/fuse.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/scu.h>
#include <asm/arch-tegra/tegra.h>
#include <asm/arch-tegra/warmboot.h>
int tegra_get_chip(void)
{
int rev;
struct apb_misc_gp_ctlr *gp =
(struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
/*
* This is undocumented, Chip ID is bits 15:8 of the register
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
* Tegra30, 0x35 for T114, and 0x40 for Tegra124.
*/
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
debug("%s: CHIPID is 0x%02X\n", __func__, rev);
return rev;
}
int tegra_get_sku_info(void)
{
int sku_id;
struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE;
sku_id = readl(&fuse->sku_info) & 0xff;
debug("%s: SKU info byte is 0x%02X\n", __func__, sku_id);
return sku_id;
}
int tegra_get_chip_sku(void)
{
uint sku_id, chip_id;
chip_id = tegra_get_chip();
sku_id = tegra_get_sku_info();
switch (chip_id) {
case CHIPID_TEGRA20:
switch (sku_id) {
case SKU_ID_T20_7:
case SKU_ID_T20:
return TEGRA_SOC_T20;
case SKU_ID_T25SE:
case SKU_ID_AP25:
case SKU_ID_T25:
case SKU_ID_AP25E:
case SKU_ID_T25E:
return TEGRA_SOC_T25;
}
break;
case CHIPID_TEGRA30:
switch (sku_id) {
case SKU_ID_T33:
case SKU_ID_T30:
case SKU_ID_TM30MQS_P_A3:
default:
return TEGRA_SOC_T30;
}
break;
case CHIPID_TEGRA114:
switch (sku_id) {
case SKU_ID_T114_ENG:
case SKU_ID_T114_1:
default:
return TEGRA_SOC_T114;
}
break;
case CHIPID_TEGRA124:
switch (sku_id) {
case SKU_ID_T124_ENG:
default:
return TEGRA_SOC_T124;
}
break;
}
/* unknown chip/sku id */
printf("%s: ERROR: UNKNOWN CHIP/SKU ID COMBO (0x%02X/0x%02X)\n",
__func__, chip_id, sku_id);
return TEGRA_SOC_UNKNOWN;
}
static void enable_scu(void)
{
struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
u32 reg;
/* Only enable the SCU on T20/T25 */
if (tegra_get_chip() != CHIPID_TEGRA20)
return;
/* If SCU already setup/enabled, return */
if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
return;
/* Invalidate all ways for all processors */
writel(0xFFFF, &scu->scu_inv_all);
/* Enable SCU - bit 0 */
reg = readl(&scu->scu_ctrl);
reg |= SCU_CTRL_ENABLE;
writel(reg, &scu->scu_ctrl);
}
static u32 get_odmdata(void)
{
/*
* ODMDATA is stored in the BCT in IRAM by the BootROM.
* The BCT start and size are stored in the BIT in IRAM.
* Read the data @ bct_start + (bct_size - 12). This works
* on BCTs for currently supported SoCs, which are locked down.
* If this changes in new chips, we can revisit this algorithm.
*/
u32 bct_start, odmdata;
bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR);
odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
return odmdata;
}
static void init_pmc_scratch(void)
{
struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
u32 odmdata;
int i;
/* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
for (i = 0; i < 23; i++)
writel(0, &pmc->pmc_scratch1+i);
/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
odmdata = get_odmdata();
writel(odmdata, &pmc->pmc_scratch20);
}
void s_init(void)
{
/* Init PMC scratch memory */
init_pmc_scratch();
enable_scu();
/* init the cache */
config_cache();
/* init vpr */
config_vpr();
}