u-boot/board/microchip/pic32mzda
Purna Chandra Mandal 44da3a176c board: Add Microchip PIC32MZ[DA]-Starter-Kit board.
This adds support for Microchip PIC32MZ[DA] StarterKit board
based on a PIC32MZ[DA] family of microcontroller.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-02-01 22:14:01 +01:00
..
Kconfig board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
MAINTAINERS board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
Makefile board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
pic32mzda.c board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00
README board: Add Microchip PIC32MZ[DA]-Starter-Kit board. 2016-02-01 22:14:01 +01:00

/*
 * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
 */

PIC32MZ[DA] Starter Kit
----------------------------------------
PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
This family is powered by MIPS M14KEC 32bit general purpose core and has
advanced microcontroller features and peripherals.

This processor boots with proprietary stage1 bootloader running from internal
boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
on internal program-flash. Finally U-Boot loads OS image (along with other
required files for booting) from either uSD card, or ethernet, or from USB
storage.

To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
environment file), uImage, *.dtb (platform device-tree-blob file).

U-Boot jumps to Linux using UHI specification.

Visit http://microchip.com for details.