286 lines
9 KiB
C
286 lines
9 KiB
C
/*
|
|
* (C) Copyright 2002, 2003
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
* Gary Jennejohn <gj@denx.de>
|
|
* David Mueller <d.mueller@elsoft.ch>
|
|
*
|
|
* Configuation settings for the MPL VCMA9 board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
|
|
#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
|
|
#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */
|
|
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
|
|
|
|
/* input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */
|
|
|
|
#define USE_920T_MMU 1
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
/***********************************************************
|
|
* Command definition
|
|
***********************************************************/
|
|
#define CONFIG_COMMANDS \
|
|
(CONFIG_CMD_DFL | \
|
|
CFG_CMD_CACHE | \
|
|
/*CFG_CMD_JFFS2 |*/ \
|
|
/*CFG_CMD_NAND |*/ \
|
|
CFG_CMD_EEPROM | \
|
|
CFG_CMD_I2C | \
|
|
CFG_CMD_USB | \
|
|
CFG_CMD_REGINFO | \
|
|
CFG_CMD_FAT | \
|
|
CFG_CMD_DATE | \
|
|
CFG_CMD_ELF | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_PING | \
|
|
CFG_CMD_BSP)
|
|
|
|
/* this must be included after the definiton of CONFIG_COMMANDS */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
/***********************************************************
|
|
* I2C stuff:
|
|
* the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
|
|
* address 0x50 with 16bit addressing
|
|
***********************************************************/
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CFG_I2C_SPEED 100000 /* I2C speed */
|
|
#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
|
|
|
|
#define CFG_I2C_EEPROM_ADDR 0x50
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 2
|
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#define CFG_ENV_OFFSET 0x000 /* environment starts at offset 0 */
|
|
#define CFG_ENV_SIZE 0x800 /* 2KB should be more than enough */
|
|
|
|
#undef CFG_I2C_EEPROM_ADDR_OVERFLOW
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes page write mode on 24C256 */
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
/*#define CONFIG_MALLOC_SIZE (CFG_ENV_SIZE + 128*1024)*/
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
#define CFG_MONITOR_LEN (256 * 1024)
|
|
#define CFG_MALLOC_LEN (1024 * 1024) /* BUNZIP2 needs a lot of RAM */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
|
|
#define CS8900_BASE 0x20000300
|
|
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
|
|
|
|
#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on VCMA9 */
|
|
|
|
/************************************************************
|
|
* USB support
|
|
************************************************************/
|
|
#define CONFIG_USB_OHCI 1
|
|
#define CONFIG_USB_KEYBOARD 1
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/* Enable needed helper functions */
|
|
#define CFG_DEVICE_DEREGISTER /* needs device_deregister */
|
|
|
|
/************************************************************
|
|
* RTC
|
|
************************************************************/
|
|
#define CONFIG_RTC_S3C24X0 1
|
|
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
|
|
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
|
|
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_IPADDR 10.0.0.110
|
|
#define CONFIG_SERVERIP 10.0.0.1
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
/* what's this ? it's not used anywhere */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "VCMA9 # " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x30F80000 /* 15.5 MB in DRAM */
|
|
|
|
#define CFG_ALT_MEMTEST
|
|
#define CFG_LOAD_ADDR 0x30800000 /* default load address */
|
|
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
/* we configure PWM Timer 4 to 1us ~ 1MHz */
|
|
/*#define CFG_HZ 1000000 */
|
|
#define CFG_HZ 1562500
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/* support BZIP2 compression */
|
|
#define CONFIG_BZIP2 1
|
|
|
|
/************************************************************
|
|
* Ident
|
|
************************************************************/
|
|
/*#define VERSION_TAG "released"*/
|
|
#define VERSION_TAG "unstable"
|
|
#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, MEV-10080-001 " VERSION_TAG
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
|
|
#if 0
|
|
#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
|
|
#endif
|
|
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#ifdef CONFIG_AMD_LV800
|
|
#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
|
|
#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
|
|
#endif
|
|
#ifdef CONFIG_AMD_LV400
|
|
#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
|
|
#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
|
|
#endif
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#if 0
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
|
|
#endif
|
|
|
|
|
|
#define CFG_JFFS2_FIRST_BANK 0
|
|
#define CFG_JFFS2_NUM_BANKS 1
|
|
|
|
#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* NAND flash settings
|
|
*/
|
|
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
|
|
|
|
#define CFG_NAND_LEGACY
|
|
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
|
#define SECTORSIZE 512
|
|
|
|
#define ADDR_COLUMN 1
|
|
#define ADDR_PAGE 2
|
|
#define ADDR_COLUMN_PAGE 3
|
|
|
|
#define NAND_ChipID_UNKNOWN 0x00
|
|
#define NAND_MAX_FLOORS 1
|
|
#define NAND_MAX_CHIPS 1
|
|
|
|
#define NAND_WAIT_READY(nand) NF_WaitRB()
|
|
|
|
#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH)
|
|
#define NAND_ENABLE_CE(nand) NF_SetCE(NFCE_LOW)
|
|
|
|
|
|
#define WRITE_NAND_COMMAND(d, adr) NF_Cmd(d)
|
|
#define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d)
|
|
#define WRITE_NAND_ADDRESS(d, adr) NF_Addr(d)
|
|
#define WRITE_NAND(d, adr) NF_Write(d)
|
|
#define READ_NAND(adr) NF_Read()
|
|
/* the following functions are NOP's because S3C24X0 handles this in hardware */
|
|
#define NAND_CTL_CLRALE(nandptr)
|
|
#define NAND_CTL_SETALE(nandptr)
|
|
#define NAND_CTL_CLRCLE(nandptr)
|
|
#define NAND_CTL_SETCLE(nandptr)
|
|
|
|
#define CONFIG_MTD_NAND_VERIFY_WRITE 1
|
|
#define CONFIG_MTD_NAND_ECC_JFFS2 1
|
|
|
|
#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
|
|
|
|
#endif /* __CONFIG_H */
|