Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Paulraj Sandeep <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
429 lines
12 KiB
C
429 lines
12 KiB
C
/*
|
|
* SoC-specific lowlevel code for AM1808 and similar chips
|
|
*
|
|
* Copyright (C) 2011
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <ns16550.h>
|
|
#include <post.h>
|
|
#include <asm/arch/am1808_lowlevel.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/ddr2_defs.h>
|
|
#include <asm/arch/emif_defs.h>
|
|
|
|
void am1808_waitloop(unsigned long loopcnt)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0; i < loopcnt; i++)
|
|
asm(" NOP");
|
|
}
|
|
|
|
int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
|
|
{
|
|
if (reg == davinci_pllc0_regs)
|
|
/* Unlock PLL registers. */
|
|
clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
|
|
|
|
/*
|
|
* Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
|
|
* through MMR
|
|
*/
|
|
clrbits_le32(®->pllctl, 0x00000020);
|
|
/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
|
|
clrbits_le32(®->pllctl, 0x00000200);
|
|
|
|
/* Set PLLEN=0 => PLL BYPASS MODE */
|
|
clrbits_le32(®->pllctl, 0x00000001);
|
|
|
|
am1808_waitloop(150);
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
/*
|
|
* Select the Clock Mode bit 8 as External Clock or On Chip
|
|
* Oscilator
|
|
*/
|
|
dv_maskbits(®->pllctl, 0xFFFFFEFF);
|
|
setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
|
|
}
|
|
|
|
/* Clear PLLRST bit to reset the PLL */
|
|
clrbits_le32(®->pllctl, 0x00000008);
|
|
|
|
/* Disable the PLL output */
|
|
setbits_le32(®->pllctl, 0x00000010);
|
|
|
|
/* PLL initialization sequence */
|
|
/*
|
|
* Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
|
|
* power down bit
|
|
*/
|
|
clrbits_le32(®->pllctl, 0x00000002);
|
|
|
|
/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
|
|
clrbits_le32(®->pllctl, 0x00000010);
|
|
|
|
/* Program the required multiplier value in PLLM */
|
|
writel(pllmult, ®->pllm);
|
|
|
|
/* program the postdiv */
|
|
if (reg == davinci_pllc0_regs)
|
|
writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
|
|
®->postdiv);
|
|
else
|
|
writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
|
|
®->postdiv);
|
|
|
|
/*
|
|
* Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
|
|
* no GO operation is currently in progress
|
|
*/
|
|
while ((readl(®->pllstat) & 0x1) == 1)
|
|
;
|
|
|
|
if (reg == davinci_pllc0_regs) {
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, ®->plldiv3);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, ®->plldiv4);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, ®->plldiv5);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, ®->plldiv6);
|
|
writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, ®->plldiv7);
|
|
} else {
|
|
writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, ®->plldiv1);
|
|
writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, ®->plldiv2);
|
|
writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, ®->plldiv3);
|
|
}
|
|
|
|
/*
|
|
* Set the GOSET bit in PLLCMD to 1 to initiate a new divider
|
|
* transition.
|
|
*/
|
|
setbits_le32(®->pllcmd, 0x01);
|
|
|
|
/*
|
|
* Wait for the GOSTAT bit in PLLSTAT to clear to 0
|
|
* (completion of phase alignment).
|
|
*/
|
|
while ((readl(®->pllstat) & 0x1) == 1)
|
|
;
|
|
|
|
/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
|
|
am1808_waitloop(200);
|
|
|
|
/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
|
|
setbits_le32(®->pllctl, 0x00000008);
|
|
|
|
/* Wait for PLL to lock. See PLL spec for PLL lock time */
|
|
am1808_waitloop(2400);
|
|
|
|
/*
|
|
* Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
|
|
* mode
|
|
*/
|
|
setbits_le32(®->pllctl, 0x00000001);
|
|
|
|
|
|
/*
|
|
* clear EMIFA and EMIFB clock source settings, let them
|
|
* run off SYSCLK
|
|
*/
|
|
if (reg == davinci_pllc0_regs)
|
|
dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
|
|
unsigned char domain, unsigned char state)
|
|
{
|
|
struct davinci_psc_regs *reg;
|
|
dv_reg_p mdstat, mdctl;
|
|
|
|
if (pscnum == 0) {
|
|
reg = davinci_psc0_regs;
|
|
mdstat = ®->psc0.mdstat[module];
|
|
mdctl = ®->psc0.mdctl[module];
|
|
} else {
|
|
reg = davinci_psc1_regs;
|
|
mdstat = ®->psc1.mdstat[module];
|
|
mdctl = ®->psc1.mdctl[module];
|
|
}
|
|
|
|
/* Wait for any outstanding transition to complete */
|
|
while ((readl(®->ptstat) & (0x00000001 << domain)))
|
|
;
|
|
|
|
/* If we are already in that state, just return */
|
|
if ((readl(mdstat) & 0x1F) == state)
|
|
return;
|
|
|
|
/* Perform transition */
|
|
writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
|
|
setbits_le32(®->ptcmd, (0x00000001 << domain));
|
|
|
|
/* Wait for transition to complete */
|
|
while (readl(®->ptstat) & (0x00000001 << domain))
|
|
;
|
|
|
|
/* Wait and verify the state */
|
|
while ((readl(mdstat) & 0x1F) != state)
|
|
;
|
|
}
|
|
|
|
int am1808_ddr_setup(unsigned int freq)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
/* Enable the Clock to DDR2/mDDR */
|
|
am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
|
|
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
|
|
/* Begin VTP Calibration */
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
|
|
|
|
/* Polling READY bit to see when VTP calibration is done */
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
while ((tmp & VTP_READY) != VTP_READY)
|
|
tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
|
|
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
|
|
|
|
setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
|
|
}
|
|
|
|
writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
|
|
clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
|
|
(1 << DDR_SLEW_CMOSEN_BIT));
|
|
|
|
setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
|
|
|
|
writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
|
|
(readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
|
|
&dv_ddr2_regs_ctrl->sdbcr);
|
|
writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
|
|
|
|
writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
|
|
writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
|
|
|
|
clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
|
|
(1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
|
|
|
|
/*
|
|
* LPMODEN and MCLKSTOPEN must be set!
|
|
* Without this bits set, PSC don;t switch states !!
|
|
*/
|
|
writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
|
|
(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
|
|
(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
|
|
&dv_ddr2_regs_ctrl->sdrcr);
|
|
|
|
/* SyncReset the Clock to EMIF3A SDRAM */
|
|
am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
|
|
/* Enable the Clock to EMIF3A SDRAM */
|
|
am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
|
|
|
|
/* disable self refresh */
|
|
clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
|
|
writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void am1808_set_mdctl(dv_reg_p mdctl)
|
|
{
|
|
if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
|
|
writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
|
|
}
|
|
|
|
void am1808_psc_init(void)
|
|
{
|
|
struct davinci_psc_regs *reg;
|
|
int i;
|
|
|
|
/* PSC 0 domain 0 init */
|
|
reg = davinci_psc0_regs;
|
|
while ((readl(®->ptstat) & 0x00000001))
|
|
;
|
|
|
|
for (i = 3; i <= 4 ; i++)
|
|
am1808_set_mdctl(®->psc0.mdctl[i]);
|
|
|
|
for (i = 7; i <= 12 ; i++)
|
|
am1808_set_mdctl(®->psc0.mdctl[i]);
|
|
|
|
/* Do Always-On Power Domain Transitions */
|
|
setbits_le32(®->ptcmd, 0x00000001);
|
|
while (readl(®->ptstat) & 0x00000001)
|
|
;
|
|
|
|
/* PSC1, domain 1 init */
|
|
reg = davinci_psc1_regs;
|
|
while ((readl(®->ptstat) & 0x00000001))
|
|
;
|
|
|
|
am1808_set_mdctl(®->psc1.mdctl[3]);
|
|
am1808_set_mdctl(®->psc1.mdctl[6]);
|
|
|
|
/* UART1 + UART2 */
|
|
for (i = 12 ; i <= 13 ; i++)
|
|
am1808_set_mdctl(®->psc1.mdctl[i]);
|
|
|
|
am1808_set_mdctl(®->psc1.mdctl[26]);
|
|
am1808_set_mdctl(®->psc1.mdctl[31]);
|
|
|
|
/* Do Always-On Power Domain Transitions */
|
|
setbits_le32(®->ptcmd, 0x00000001);
|
|
while (readl(®->ptstat) & 0x00000001)
|
|
;
|
|
}
|
|
|
|
void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
|
|
unsigned long value)
|
|
{
|
|
clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
|
|
setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
|
|
}
|
|
|
|
__attribute__((weak))
|
|
void board_gpio_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
#if defined(CONFIG_NAND_SPL)
|
|
void nand_boot(void)
|
|
{
|
|
__attribute__((noreturn)) void (*uboot)(void);
|
|
|
|
/* copy image from NOR to RAM */
|
|
memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
|
|
(void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
|
|
CONFIG_SYS_NAND_U_BOOT_SIZE);
|
|
|
|
/* and jump to it ... */
|
|
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
|
|
(*uboot)();
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_SPL)
|
|
void board_init_f(ulong bootflag)
|
|
#else
|
|
int arch_cpu_init(void)
|
|
#endif
|
|
{
|
|
/*
|
|
* copied from arch/arm/cpu/arm926ejs/start.S
|
|
*
|
|
* flush v4 I/D caches
|
|
*/
|
|
asm("mov r0, #0");
|
|
asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
|
|
asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
|
|
|
|
/*
|
|
* disable MMU stuff and caches
|
|
*/
|
|
asm("mrc p15, 0, r0, c1, c0, 0");
|
|
/* clear bits 13, 9:8 (--V- --RS) */
|
|
asm("bic r0, r0, #0x00002300");
|
|
/* clear bits 7, 2:0 (B--- -CAM) */
|
|
asm("bic r0, r0, #0x00000087");
|
|
/* set bit 2 (A) Align */
|
|
asm("orr r0, r0, #0x00000002");
|
|
/* set bit 12 (I) I-Cache */
|
|
asm("orr r0, r0, #0x00001000");
|
|
asm("mcr p15, 0, r0, c1, c0, 0");
|
|
|
|
/* Unlock kick registers */
|
|
writel(0x83e70b13, &davinci_syscfg_regs->kick0);
|
|
writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
|
|
|
|
dv_maskbits(&davinci_syscfg_regs->suspsrc,
|
|
((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
|
|
|
|
/* System PSC setup - enable all */
|
|
am1808_psc_init();
|
|
|
|
/* Setup Pinmux */
|
|
am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
|
|
am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
|
|
am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
|
|
am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
|
|
am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
|
|
am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
|
|
am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
|
|
am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
|
|
am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
|
|
am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
|
|
am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
|
|
am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
|
|
am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
|
|
am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
|
|
am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
|
|
am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
|
|
am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
|
|
am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
|
|
am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
|
|
am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
|
|
|
|
/* PLL setup */
|
|
am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
|
|
am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
|
|
|
|
/* GPIO setup */
|
|
board_gpio_init();
|
|
|
|
/* setup CSn config */
|
|
writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
|
|
writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
|
|
|
|
am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
|
|
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
|
|
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
|
|
|
|
/*
|
|
* Fix Power and Emulation Management Register
|
|
* see sprufw3a.pdf page 37 Table 24
|
|
*/
|
|
writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
|
|
(CONFIG_SYS_NS16550_COM1 + 0x30));
|
|
#if defined(CONFIG_NAND_SPL)
|
|
puts("ddr init\n");
|
|
am1808_ddr_setup(132);
|
|
|
|
puts("boot u-boot ...\n");
|
|
|
|
nand_boot();
|
|
#else
|
|
am1808_ddr_setup(132);
|
|
return 0;
|
|
#endif
|
|
}
|