u-boot/drivers/serial/usbtty.h
Masahiro Yamada 8ac22a60e2 omap: clean-up dead configs
The following configs are not defined at all.

 - CONFIG_OMAP1510
 - CONFIG_OMAP_1510P1
 - CONFIG_OMAP_SX1
 - CONFIG_OMAP3_DMA
 - CONFIG_OMAP3_ZOOM2
 - CONFIG_OMAP_INNOVATOR

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
2014-08-09 11:17:04 -04:00

78 lines
2.1 KiB
C

/*
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
* (C) Copyright 2006
* Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __USB_TTY_H__
#define __USB_TTY_H__
#include <usbdevice.h>
#if defined(CONFIG_PPC)
#include <usb/mpc8xx_udc.h>
#elif defined(CONFIG_CPU_PXA27X)
#include <usb/pxa27x_udc.h>
#elif defined(CONFIG_DW_UDC)
#include <usb/designware_udc.h>
#elif defined(CONFIG_CI_UDC)
#include <usb/ci_udc.h>
#endif
#include <usb/udc.h>
#include <version.h>
/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
* DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
#ifndef CONFIG_USBD_VENDORID
#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
#endif
#ifndef CONFIG_USBD_PRODUCTID_GSERIAL
#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
#endif
#ifndef CONFIG_USBD_PRODUCTID_CDCACM
#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
#endif
#ifndef CONFIG_USBD_MANUFACTURER
#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
#endif
#ifndef CONFIG_USBD_PRODUCT_NAME
#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
#endif
#ifndef CONFIG_USBD_CONFIGURATION_STR
#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
#endif
#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
#if defined(CONFIG_USBD_HS)
#define CONFIG_USBD_SERIAL_BULK_HS_PKTSIZE UDC_BULK_HS_PACKET_SIZE
#endif
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
#define USBTTY_BCD_DEVICE 0x00
#define USBTTY_MAXPOWER 0x00
#define STR_LANG 0x00
#define STR_MANUFACTURER 0x01
#define STR_PRODUCT 0x02
#define STR_SERIAL 0x03
#define STR_CONFIG 0x04
#define STR_DATA_INTERFACE 0x05
#define STR_CTRL_INTERFACE 0x06
#define STR_COUNT 0x07
#endif