u-boot/include/configs/secomx6quq7.h
Tom Rini 89cb2b5f8b configs: Re-sync with cmd/Kconfig
Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-25 15:09:47 -04:00

103 lines
2.8 KiB
C

/*
* Copyright (C) 2013 Seco S.r.l
*
* Configuration settings for the Seco Boards.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "mx6_common.h"
#define CONFIG_BOARD_REVISION_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
/* Command definition */
#define CONFIG_CMD_BMODE
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
/* MMC Configuration */
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"ethprime=FEC0\0" \
"netdev=eth0\0" \
"ethprime=FEC0\0" \
"uboot=u-boot.bin\0" \
"kernel=uImage\0" \
"nfsroot=/opt/eldk/arm\0" \
"ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
"ip_server=10.0.0.1\0" \
"nfs_path=/targetfs \0" \
"memory=mem=1024M\0" \
"bootdev=mmc dev 0; ext2load mmc 0:1\0" \
"root=root=/dev/mmcblk0p1\0" \
"option=rootwait rw fixrtc rootflags=barrier=1\0" \
"cpu_freq=arm_freq=996\0" \
"setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
" ${option} ${memory} ${cpu_freq}\0" \
"setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
" root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
" nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
" ${memory} ${cpu_freq}\0" \
"setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
"bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
" bootm 0x10800000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* Environment organization */
#define CONFIG_ENV_SIZE (8 * 1024)
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET (6 * 128 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_DYNAMIC_MMC_DEVNO
#endif
#endif /* __CONFIG_H */