u-boot/include/configs/trats2.h
Simon Glass ea743e659f exynos: Disable LCD display for boards we can't convert
Some boards have the LCD enabled but I cannot test operation for the driver
model conversion. Disable the LCD on these to avoid build errors.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2016-05-25 13:25:18 +09:00

232 lines
6.9 KiB
C

/*
* Copyright (C) 2013 Samsung Electronics
* Sanghee Kim <sh0130.kim@samsung.com>
* Piotr Wilczek <p.wilczek@samsung.com>
*
* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_TRATS2_H
#define __CONFIG_TRATS2_H
#include <configs/exynos4-common.h>
#define CONFIG_TIZEN /* TIZEN lib */
#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE 0x10502000
#endif
/* TRATS2 has 4 banks of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
#define CONFIG_SYS_TEXT_BASE 0x43e00000
/* select serial console configuration */
#define CONFIG_SERIAL2
#define CONFIG_BAUDRATE 115200
/* Console configuration */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_BOOTARGS "Please use defined boot"
#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
#define CONFIG_ENV_SIZE 4096
#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
#define PARTS_QBOOT "qboot"
#define PARTS_CSC "csc"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CONFIG_DFU_ALT \
"u-boot raw 0x80 0x800;" \
"/uImage ext4 0 2;" \
"/modem.bin ext4 0 2;" \
"/exynos4412-trats2.dtb ext4 0 2;" \
""PARTS_CSA" part 0 1;" \
""PARTS_BOOT" part 0 2;" \
""PARTS_QBOOT" part 0 3;" \
""PARTS_CSC" part 0 4;" \
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
"params.bin raw 0x38 0x8;" \
"/Image.itb ext4 0 2\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaduimage;" \
"if run loaddtb; then " \
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
"updatebackup=" \
"mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
" mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run bootk\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"kernelname=uImage\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
"${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
"dfu_alt_info=" CONFIG_DFU_ALT \
"uartpath=ap\0" \
"usbpath=ap\0" \
"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
"consoleoff=set console console=ram; save; reset\0" \
"spladdr=0x40000100\0" \
"splsize=0x200\0" \
"splfile=falcon.bin\0" \
"spl_export=" \
"setexpr spl_imgsize ${splsize} + 8 ;" \
"setenv spl_imgsize 0x${spl_imgsize};" \
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
"spl export atags 0x40007FC0;" \
"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
"mw.l ${spl_addr_tmp} ${splsize};" \
"ext4write mmc ${mmcdev}:${mmcbootpart}" \
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
CONFIG_EXTRA_ENV_ITB \
"fdtaddr=40800000\0" \
/* GPT */
#define CONFIG_RANDOM_UUID
/* I2C */
#include <asm/arch/gpio.h>
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_S3C24X0
#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
#define CONFIG_MAX_I2C_NUM 8
#define CONFIG_SYS_I2C_SOFT
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
#define I2C_SOFT_DECLARATIONS2
#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
#ifndef __ASSEMBLY__
int get_soft_i2c_scl_pin(void);
int get_soft_i2c_sda_pin(void);
#endif
#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()
/* POWER */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX77686
#define CONFIG_POWER_PMIC_MAX77693
#define CONFIG_POWER_MUIC_MAX77693
#define CONFIG_POWER_FG_MAX77693
#define CONFIG_POWER_BATTERY_TRATS2
/* Security subsystem - enable hw_rand() */
#define CONFIG_EXYNOS_ACE_SHA
#define CONFIG_LIB_HW_RAND
/* Common misc for Samsung */
#define CONFIG_MISC_COMMON
#define CONFIG_MISC_INIT_R
/* Download menu - Samsung common */
#define CONFIG_LCD_MENU
#define CONFIG_LCD_MENU_BOARD
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
#include <power/max77686_pmic.h>
#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1
#define KEY_PWR_STATUS_MASK (1 << 0)
#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 1)
#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
#endif /* __ASSEMBLY__ */
/* LCD console */
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
/* LCD */
#define CONFIG_BMP_16BPP
#define CONFIG_FB_ADDR 0x52504000
#define CONFIG_EXYNOS_MIPI_DSIM
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
#endif /* __CONFIG_H */