u-boot/board/freescale/common
Abhimanyu Saini 16dacb26a5 board: freescale: common: Add flag for LBMAP brdcfg reg offset
Add QIXIS_LBMAP_BRDCFG_REG to the save offset of LBMAP
configuration register instead of hardcoding it in
set_lbmap() function.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-06-03 14:12:51 -07:00
..
p_corenet powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
arm_sleep.c qe: move drivers/qe/qe.h to include/fsl_qe.h 2016-02-24 08:51:13 -08:00
cadmus.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cadmus.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cds_pci_ft.c fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
cds_via.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cmd_esbc_validate.c SECURE BOOT: Change fsl_secboot_validate func to pass image addr 2016-03-29 08:46:23 -07:00
dcu_sii9022a.c video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
dcu_sii9022a.h video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
diu_ch7301.c fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
diu_ch7301.h fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
eeprom.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
fman.c freescale: fman: make sure phy-handle property is big endian 2015-12-13 18:27:28 -08:00
fman.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
fsl_chain_of_trust.c secure_boot: enable chain of trust for ARM platforms 2016-01-27 08:12:49 -08:00
fsl_validate.c Fix various typos, scattered over the code. 2016-05-05 21:39:26 -04:00
ics307_clk.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ics307_clk.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
idt8t49n222a_serdes_clk.c powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
idt8t49n222a_serdes_clk.h powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
ls102xa_stream_id.c board: ls102xa: Fix ICID setup 2016-06-03 14:12:06 -07:00
Makefile secure_boot: enable chain of trust for ARM platforms 2016-01-27 08:12:49 -08:00
mpc85xx_sleep.c qe: move drivers/qe/qe.h to include/fsl_qe.h 2016-02-24 08:51:13 -08:00
ngpixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ngpixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ns_access.c armv7/ls1021a: move ns_access to common file 2015-10-29 10:33:58 -07:00
pfuze.c pfuze: Fix unsigned variable for less-than-zero comparison 2016-01-07 17:48:25 +01:00
pfuze.h pmic:pfuze implement pmic_mode_init 2015-02-11 12:27:46 +01:00
pixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pq-mds-pib.c powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support 2015-01-23 16:53:00 -05:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
qixis.c board: freescale: common: Add flag for LBMAP brdcfg reg offset 2016-06-03 14:12:51 -07:00
qixis.h mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card 2015-11-02 08:50:29 -08:00
sdhc_boot.c block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
sgmii_riser.c powerpc/sgmii: To support PHY link state auto detect in SGMII mode 2012-08-08 18:32:15 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sleep.h fsl/sleep: updated the deep sleep framework for QorIQ platforms 2014-12-11 09:41:18 -08:00
sys_eeprom.c board/fsl/common: Fix eeprom system version endianness 2015-07-20 11:44:34 -07:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
vid.c armv8/ls2080ardb: Enable VID support 2016-03-29 08:46:24 -07:00
vid.h board/freescale/common: Check IR chip mode for VID support 2016-01-25 12:37:03 -08:00
vsc3316_3308.c powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
vsc3316_3308.h powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
zm7300.c board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00
zm7300.h board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00