u-boot/board/bf609-ezkit/bf609-ezkit.c
Simon Glass ef48f6dd30 Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
Move this to Kconfig and clean up board config files that use it. Also
rename it to CONFIG_ETH_DESIGNWARE to fit with the naming that exists
in drivers/net/Kconfig.

Signed-off-by: Simon Glass <sjg@chromium.org>
Version 1:
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-04-18 11:11:36 -06:00

69 lines
1.4 KiB
C

/*
* U-boot - main board file
*
* Copyright (c) 2008-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <netdev.h>
#include <asm/blackfin.h>
#include <asm/io.h>
#include <asm/sdh.h>
#include <asm/portmux.h>
#include "soft_switch.h"
int checkboard(void)
{
printf("Board: ADI BF609 EZ-Kit board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
}
int board_early_init_f(void)
{
static const unsigned short pins[] = {
P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21,
P_A22, P_A23, P_A24, P_A25, P_NORCK, 0,
};
peripheral_request_list(pins, "smc0");
return 0;
}
#ifdef CONFIG_ETH_DESIGNWARE
int board_eth_init(bd_t *bis)
{
int ret = 0;
if (CONFIG_DW_PORTS & 1) {
static const unsigned short pins[] = P_RMII0;
if (!peripheral_request_list(pins, "emac0"))
ret += designware_initialize(EMAC0_MACCFG, 0);
}
if (CONFIG_DW_PORTS & 2) {
static const unsigned short pins[] = P_RMII1;
if (!peripheral_request_list(pins, "emac1"))
ret += designware_initialize(EMAC1_MACCFG, 0);
}
return ret;
}
#endif
#ifdef CONFIG_BFIN_SDH
int board_mmc_init(bd_t *bis)
{
return bfin_mmc_init(bis);
}
#endif
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
printf("other init\n");
return setup_board_switches();
}