Add these definitions so that GPIOs can be used with driver model. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Tested-on: smartweb, corvus, taurus, axm Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
186 lines
5.2 KiB
C
186 lines
5.2 KiB
C
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian@popies.net>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
|
|
* peripheral pins. Good to have if hardware is soldered optionally
|
|
* or in case of SPI no slave is selected. Avoid lines to float
|
|
* needlessly. Use a short local PUP define.
|
|
*
|
|
* Due to errata "TXD floats when CTS is inactive" pullups are always
|
|
* on for TXD pins.
|
|
*/
|
|
#ifdef CONFIG_AT91_GPIO_PULLUP
|
|
# define PUP CONFIG_AT91_GPIO_PULLUP
|
|
#else
|
|
# define PUP 0
|
|
#endif
|
|
|
|
void at91_serial0_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART0);
|
|
}
|
|
|
|
void at91_serial1_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART1);
|
|
}
|
|
|
|
void at91_serial2_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */
|
|
at91_periph_clk_enable(ATMEL_ID_USART2);
|
|
}
|
|
|
|
void at91_seriald_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */
|
|
at91_periph_clk_enable(ATMEL_ID_SYS);
|
|
}
|
|
|
|
#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
|
|
void at91_spi0_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SPI0);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_b_periph(AT91_PIO_PORTB, 19, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_b_periph(AT91_PIO_PORTD, 27, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 19, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTD, 27, 1);
|
|
}
|
|
}
|
|
|
|
void at91_spi1_hw_init(unsigned long cs_mask)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */
|
|
at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_SPI1);
|
|
|
|
if (cs_mask & (1 << 0)) {
|
|
at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 1)) {
|
|
at91_set_b_periph(AT91_PIO_PORTD, 28, 1);
|
|
}
|
|
if (cs_mask & (1 << 2)) {
|
|
at91_set_a_periph(AT91_PIO_PORTD, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 3)) {
|
|
at91_set_a_periph(AT91_PIO_PORTD, 19, 1);
|
|
}
|
|
if (cs_mask & (1 << 4)) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
|
|
}
|
|
if (cs_mask & (1 << 5)) {
|
|
at91_set_pio_output(AT91_PIO_PORTD, 28, 1);
|
|
}
|
|
if (cs_mask & (1 << 6)) {
|
|
at91_set_pio_output(AT91_PIO_PORTD, 18, 1);
|
|
}
|
|
if (cs_mask & (1 << 7)) {
|
|
at91_set_pio_output(AT91_PIO_PORTD, 19, 1);
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
void at91_macb_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ETXCK_EREFCK */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERXDV */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ERX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ERX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ERXER */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ETXEN */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* ETX0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* ETX1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* EMDIO */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* EMDC */
|
|
#ifndef CONFIG_RMII
|
|
at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECRS */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 30, 0); /* ECOL */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 8, 0); /* ERX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 9, 0); /* ERX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ERXCK */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 6, 0); /* ETX2 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 7, 0); /* ETX3 */
|
|
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ETXER */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
|
void at91_mci_hw_init(void)
|
|
{
|
|
at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */
|
|
at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */
|
|
|
|
at91_periph_clk_enable(ATMEL_ID_MCI0);
|
|
}
|
|
#endif
|
|
|
|
/* Platform data for the GPIOs */
|
|
static const struct at91_port_platdata at91sam9260_plat[] = {
|
|
{ ATMEL_BASE_PIOA, "PA" },
|
|
{ ATMEL_BASE_PIOB, "PB" },
|
|
{ ATMEL_BASE_PIOC, "PC" },
|
|
{ ATMEL_BASE_PIOD, "PD" },
|
|
{ ATMEL_BASE_PIOE, "PE" },
|
|
};
|
|
|
|
U_BOOT_DEVICES(at91sam9260_gpios) = {
|
|
{ "gpio_at91", &at91sam9260_plat[0] },
|
|
{ "gpio_at91", &at91sam9260_plat[1] },
|
|
{ "gpio_at91", &at91sam9260_plat[2] },
|
|
{ "gpio_at91", &at91sam9260_plat[3] },
|
|
{ "gpio_at91", &at91sam9260_plat[4] },
|
|
};
|