u-boot/common/altera.c
eran liberty 3c735e7437 Altera Stratix II support
Adds Support for Altera's Stratix II.

Within your board specific init file you will have to call

1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);

Altera_desc* contines (for example):
	{
	 Altera_StratixII,	/* part type */
	 passive_serial,	/* interface type */
	 1,			/* bytes of data part can accept */
	 (void *)(&funcs),	/* interface function table */
	 0L,			/* base interface address */
	 0			/* implementation specific cookie */
	 }

funcs is the interface. It is of type altera_board_specific_func.
It looks like this:
altera_board_specific_func func = {
	pre_fn,
	config_fn,
	status_fn,
	done_fn,
	clk_fn,
	data_fn,
	abort_fn,
	post_fn,
};

you will have to implement these functions, which is usually bit
banging some gpio.

Signed-off-by: Eran Liberty <liberty@extricom.com>
2008-04-13 14:52:48 -07:00

288 lines
7.2 KiB
C

/*
* (C) Copyright 2003
* Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Altera FPGA support
*/
#include <common.h>
#include <ACEX1K.h>
#include <stratixII.h>
/* Define FPGA_DEBUG to get debug printf's */
/* #define FPGA_DEBUG */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, const char *fn);
/* ------------------------------------------------------------------------- */
int altera_load( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
#elif defined(CONFIG_FPGA_CYCLON2)
PRINTF ("%s: Launching the CYCLON II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Loader...\n",
__FUNCTION__);
ret_val = StratixII_load (desc, buf, bsize);
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Reader...\n",
__FUNCTION__);
ret_val = StratixII_dump (desc, buf, bsize);
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
case Altera_CYC2:
printf ("CYCLON II\n");
break;
case Altera_StratixII:
printf ("Stratix II\n");
break;
/* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
}
printf ("Interface type:\t");
switch (desc->iface) {
case passive_serial:
printf ("Passive Serial (PS)\n");
break;
case passive_parallel_synchronous:
printf ("Passive Parallel Synchronous (PPS)\n");
break;
case passive_parallel_asynchronous:
printf ("Passive Parallel Asynchronous (PPA)\n");
break;
case passive_serial_asynchronous:
printf ("Passive Serial Asynchronous (PSA)\n");
break;
case altera_jtag_mode: /* Not used */
printf ("JTAG Mode\n");
break;
case fast_passive_parallel:
printf ("Fast Passive Parallel (FPP)\n");
break;
case fast_passive_parallel_security:
printf
("Fast Passive Parallel with Security (FPPS) \n");
break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
}
printf ("Device Size: \t%d bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
StratixII_info (desc);
break;
#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
break;
}
} else {
printf ("No Device Function Table.\n");
}
ret_val = FPGA_SUCCESS;
} else {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
}
return ret_val;
}
int altera_reloc( Altera_desc *desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if defined(CONFIG_FPGA_ACEX1K)
ret_val = ACEX1K_reloc (desc, reloc_offset);
#else
printf ("%s: No support for ACEX devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
ret_val = StratixII_reloc (desc, reloc_offset);
break;
#endif
case Altera_CYC2:
#if defined(CONFIG_FPGA_CYCLON2)
ret_val = CYC2_reloc (desc, reloc_offset);
#else
printf ("%s: No support for CYCLON II devices.\n",
__FUNCTION__);
#endif
break;
/* Add new family types here */
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
static int altera_validate (Altera_desc * desc, const char *fn)
{
int ret_val = FALSE;
if (desc) {
if ((desc->family > min_altera_type) &&
(desc->family < max_altera_type)) {
if ((desc->iface > min_altera_iface_type) &&
(desc->iface < max_altera_iface_type)) {
if (desc->size) {
ret_val = TRUE;
} else {
printf ("%s: NULL part size\n", fn);
}
} else {
printf ("%s: Invalid Interface type, %d\n",
fn, desc->iface);
}
} else {
printf ("%s: Invalid family type, %d\n", fn, desc->family);
}
} else {
printf ("%s: NULL descriptor!\n", fn);
}
return ret_val;
}
/* ------------------------------------------------------------------------- */
#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */