u-boot/include/configs/shannon.h
wdenk 699b13a606 * Fix mdelay() on TRAB - this was still the debugging version with
seconds instead of ms.

* Patch by Robert Schwebel, 1 Nov 2002:
  XScale related cleanup (affects all ARM boards)

* Cleanup of names, warnings and README.
2002-11-03 18:03:52 +00:00

219 lines
7.1 KiB
C

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* Configuation settings for the Shannon/TuxScreen/IS2630 WebPhone Board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* If we are developing, we might want to start armboot from ram
* so we MUST NOT initialize critical regs like mem-timing ...
*/
/*
* we just run in non-critical mode now, because we use the Inferno-Loader to
* bring us to live
*/
#define CONFIG_INFERNO /* we are using the inferno bootldr */
#undef CONFIG_INIT_CRITICAL /* undef for developing */
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_SA1100 1 /* This is an SA1100 CPU */
#define CONFIG_SHANNON 1 /* on an SHANNON/TuxScreen Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
/*
* Hardware drivers
*/
#define CONFIG_DRIVER_3C589 1
/*
* select serial console configuration
*/
#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#if 0 /* XXX - cannot test IDE anyway, so disabled for now - wd */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCMCIA | \
CFG_CMD_IDE)
#endif /* 0 */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200"
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_BOOTCOMMAND "help"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "TuxScreen # " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */
#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0xd0000000 /* default load address */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CFG_CPUSPEED 0x09 /* 190 MHz for Shannon */
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_DOS_PARTITION 1 /* DOS partitiion support */
/*-----------------------------------------------------------------------
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
/* BE CAREFUL */
#define CONFIG_NR_DRAM_BANKS 4 /* we have 4 banks of EDORAM */
#define PHYS_SDRAM_1 0xc0000000 /* RAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x00400000 /* 4 MB */
#define PHYS_SDRAM_2 0xc8000000 /* RAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x00400000 /* 4 MB */
#define PHYS_SDRAM_3 0xd0000000 /* RAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x00400000 /* 4 MB */
#define PHYS_SDRAM_4 0xd8000000 /* RAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00400000 /* 4 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
#define CFG_FLASH_BASE PHYS_FLASH_1
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT (31+4) /* max number of sectors on one chip */
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
#ifdef CONFIG_INFERNO
/* we take the last sector, 128 KB in size, but we only use 4 KB of it for stack reasons */
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x003E0000) /* Addr of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#else
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
#endif
/*-----------------------------------------------------------------------
* PCMCIA stuff
*-----------------------------------------------------------------------
*
*/
/* we pick the upper one */
#define CONFIG_PCMCIA_SLOT_A
#define CFG_PCMCIA_IO_ADDR (0x20000000)
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0x24000000)
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR (0x2C000000)
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
#define CFG_PCMCIA_MEM_ADDR (0x28000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
/* in fact, MEM and ATTRB are swapped - has to be corrected soon in cmd_pcmcia or so */
/*-----------------------------------------------------------------------
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
*-----------------------------------------------------------------------
*/
#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
#undef CONFIG_IDE_LED /* LED for ide not supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x0000
/* it's simple, all regs are in I/O space */
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_ATTRB_ADDR
/* Offset for data I/O */
#define CFG_ATA_DATA_OFFSET (CFG_ATA_BASE_ADDR)
/* Offset for normal register accesses */
#define CFG_ATA_REG_OFFSET (CFG_ATA_BASE_ADDR)
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (CFG_ATA_BASE_ADDR)
/*-----------------------------------------------------------------------
*/
#endif /* __CONFIG_H */