This allow the platform to handle a custom reset sequence. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
1022 lines
24 KiB
C
1022 lines
24 KiB
C
/*
|
|
* Copyright (C) Freescale Semiconductor, Inc. 2006.
|
|
* Author: Jason Jin<Jason.jin@freescale.com>
|
|
* Zhang Wei<wei.zhang@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* with the reference on libata and ahci drvier in kernel
|
|
*/
|
|
#include <common.h>
|
|
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <scsi.h>
|
|
#include <libata.h>
|
|
#include <linux/ctype.h>
|
|
#include <ahci.h>
|
|
|
|
static int ata_io_flush(u8 port);
|
|
|
|
struct ahci_probe_ent *probe_ent = NULL;
|
|
u16 *ataid[AHCI_MAX_PORTS];
|
|
|
|
#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0)
|
|
|
|
/*
|
|
* Some controllers limit number of blocks they can read/write at once.
|
|
* Contemporary SSD devices work much faster if the read/write size is aligned
|
|
* to a power of 2. Let's set default to 128 and allowing to be overwritten if
|
|
* needed.
|
|
*/
|
|
#ifndef MAX_SATA_BLOCKS_READ_WRITE
|
|
#define MAX_SATA_BLOCKS_READ_WRITE 0x80
|
|
#endif
|
|
|
|
/* Maximum timeouts for each event */
|
|
#define WAIT_MS_SPINUP 20000
|
|
#define WAIT_MS_DATAIO 5000
|
|
#define WAIT_MS_FLUSH 5000
|
|
#define WAIT_MS_LINKUP 200
|
|
|
|
static inline u32 ahci_port_base(u32 base, u32 port)
|
|
{
|
|
return base + 0x100 + (port * 0x80);
|
|
}
|
|
|
|
|
|
static void ahci_setup_port(struct ahci_ioports *port, unsigned long base,
|
|
unsigned int port_idx)
|
|
{
|
|
base = ahci_port_base(base, port_idx);
|
|
|
|
port->cmd_addr = base;
|
|
port->scr_addr = base + PORT_SCR;
|
|
}
|
|
|
|
|
|
#define msleep(a) udelay(a * 1000)
|
|
|
|
static void ahci_dcache_flush_range(unsigned begin, unsigned len)
|
|
{
|
|
const unsigned long start = begin;
|
|
const unsigned long end = start + len;
|
|
|
|
debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
|
|
flush_dcache_range(start, end);
|
|
}
|
|
|
|
/*
|
|
* SATA controller DMAs to physical RAM. Ensure data from the
|
|
* controller is invalidated from dcache; next access comes from
|
|
* physical RAM.
|
|
*/
|
|
static void ahci_dcache_invalidate_range(unsigned begin, unsigned len)
|
|
{
|
|
const unsigned long start = begin;
|
|
const unsigned long end = start + len;
|
|
|
|
debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
|
|
/*
|
|
* Ensure data for SATA controller is flushed out of dcache and
|
|
* written to physical memory.
|
|
*/
|
|
static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
|
|
{
|
|
ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
|
|
AHCI_PORT_PRIV_DMA_SZ);
|
|
}
|
|
|
|
static int waiting_for_cmd_completed(volatile u8 *offset,
|
|
int timeout_msec,
|
|
u32 sign)
|
|
{
|
|
int i;
|
|
u32 status;
|
|
|
|
for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++)
|
|
msleep(1);
|
|
|
|
return (i < timeout_msec) ? 0 : -1;
|
|
}
|
|
|
|
int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port)
|
|
{
|
|
u32 tmp;
|
|
int j = 0;
|
|
u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio;
|
|
|
|
/*
|
|
* Bring up SATA link.
|
|
* SATA link bringup time is usually less than 1 ms; only very
|
|
* rarely has it taken between 1-2 ms. Never seen it above 2 ms.
|
|
*/
|
|
while (j < WAIT_MS_LINKUP) {
|
|
tmp = readl(port_mmio + PORT_SCR_STAT);
|
|
tmp &= PORT_SCR_STAT_DET_MASK;
|
|
if (tmp == PORT_SCR_STAT_DET_PHYRDY)
|
|
return 0;
|
|
udelay(1000);
|
|
j++;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_SUNXI_AHCI
|
|
/* The sunxi AHCI controller requires this undocumented setup */
|
|
static void sunxi_dma_init(volatile u8 *port_mmio)
|
|
{
|
|
clrsetbits_le32(port_mmio + PORT_P0DMACR, 0x0000ff00, 0x00004400);
|
|
}
|
|
#endif
|
|
|
|
int ahci_reset(u32 base)
|
|
{
|
|
int i = 1000;
|
|
u32 host_ctl_reg = base + HOST_CTL;
|
|
u32 tmp = readl(host_ctl_reg); /* global controller reset */
|
|
|
|
if ((tmp & HOST_RESET) == 0)
|
|
writel_with_flush(tmp | HOST_RESET, host_ctl_reg);
|
|
|
|
/*
|
|
* reset must complete within 1 second, or
|
|
* the hardware should be considered fried.
|
|
*/
|
|
do {
|
|
udelay(1000);
|
|
tmp = readl(host_ctl_reg);
|
|
i--;
|
|
} while ((i > 0) && (tmp & HOST_RESET));
|
|
|
|
if (i == 0) {
|
|
printf("controller reset failed (0x%x)\n", tmp);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_host_init(struct ahci_probe_ent *probe_ent)
|
|
{
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
pci_dev_t pdev = probe_ent->dev;
|
|
u16 tmp16;
|
|
unsigned short vendor;
|
|
#endif
|
|
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
|
|
u32 tmp, cap_save, cmd;
|
|
int i, j, ret;
|
|
volatile u8 *port_mmio;
|
|
u32 port_map;
|
|
|
|
debug("ahci_host_init: start\n");
|
|
|
|
cap_save = readl(mmio + HOST_CAP);
|
|
cap_save &= ((1 << 28) | (1 << 17));
|
|
cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */
|
|
|
|
ret = ahci_reset(probe_ent->mmio_base);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
|
|
writel(cap_save, mmio + HOST_CAP);
|
|
writel_with_flush(0xf, mmio + HOST_PORTS_IMPL);
|
|
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
|
|
|
|
if (vendor == PCI_VENDOR_ID_INTEL) {
|
|
u16 tmp16;
|
|
pci_read_config_word(pdev, 0x92, &tmp16);
|
|
tmp16 |= 0xf;
|
|
pci_write_config_word(pdev, 0x92, tmp16);
|
|
}
|
|
#endif
|
|
probe_ent->cap = readl(mmio + HOST_CAP);
|
|
probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL);
|
|
port_map = probe_ent->port_map;
|
|
probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1;
|
|
|
|
debug("cap 0x%x port_map 0x%x n_ports %d\n",
|
|
probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
|
|
|
|
if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
|
|
probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
|
|
|
|
for (i = 0; i < probe_ent->n_ports; i++) {
|
|
if (!(port_map & (1 << i)))
|
|
continue;
|
|
probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
|
|
port_mmio = (u8 *) probe_ent->port[i].port_mmio;
|
|
ahci_setup_port(&probe_ent->port[i], (unsigned long)mmio, i);
|
|
|
|
/* make sure port is not active */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
|
|
PORT_CMD_FIS_RX | PORT_CMD_START)) {
|
|
debug("Port %d is active. Deactivating.\n", i);
|
|
tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
|
|
PORT_CMD_FIS_RX | PORT_CMD_START);
|
|
writel_with_flush(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* spec says 500 msecs for each bit, so
|
|
* this is slightly incorrect.
|
|
*/
|
|
msleep(500);
|
|
}
|
|
|
|
#ifdef CONFIG_SUNXI_AHCI
|
|
sunxi_dma_init(port_mmio);
|
|
#endif
|
|
|
|
/* Add the spinup command to whatever mode bits may
|
|
* already be on in the command register.
|
|
*/
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd |= PORT_CMD_SPIN_UP;
|
|
writel_with_flush(cmd, port_mmio + PORT_CMD);
|
|
|
|
/* Bring up SATA link. */
|
|
ret = ahci_link_up(probe_ent, i);
|
|
if (ret) {
|
|
printf("SATA link %d timeout.\n", i);
|
|
continue;
|
|
} else {
|
|
debug("SATA link ok.\n");
|
|
}
|
|
|
|
/* Clear error status */
|
|
tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
|
|
debug("Spinning up device on SATA port %d... ", i);
|
|
|
|
j = 0;
|
|
while (j < WAIT_MS_SPINUP) {
|
|
tmp = readl(port_mmio + PORT_TFDATA);
|
|
if (!(tmp & (ATA_BUSY | ATA_DRQ)))
|
|
break;
|
|
udelay(1000);
|
|
tmp = readl(port_mmio + PORT_SCR_STAT);
|
|
tmp &= PORT_SCR_STAT_DET_MASK;
|
|
if (tmp == PORT_SCR_STAT_DET_PHYRDY)
|
|
break;
|
|
j++;
|
|
}
|
|
|
|
tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK;
|
|
if (tmp == PORT_SCR_STAT_DET_COMINIT) {
|
|
debug("SATA link %d down (COMINIT received), retrying...\n", i);
|
|
i--;
|
|
continue;
|
|
}
|
|
|
|
printf("Target spinup took %d ms.\n", j);
|
|
if (j == WAIT_MS_SPINUP)
|
|
debug("timeout.\n");
|
|
else
|
|
debug("ok.\n");
|
|
|
|
tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
debug("PORT_SCR_ERR 0x%x\n", tmp);
|
|
writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
|
|
/* ack any pending irq events for this port */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
debug("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
|
|
writel(1 << i, mmio + HOST_IRQ_STAT);
|
|
|
|
/* set irq mask (enables interrupts) */
|
|
writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/* register linkup ports */
|
|
tmp = readl(port_mmio + PORT_SCR_STAT);
|
|
debug("SATA port %d status: 0x%x\n", i, tmp);
|
|
if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY)
|
|
probe_ent->link_port_map |= (0x01 << i);
|
|
}
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
debug("HOST_CTL 0x%x\n", tmp);
|
|
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL);
|
|
debug("HOST_CTL 0x%x\n", tmp);
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
pci_read_config_word(pdev, PCI_COMMAND, &tmp16);
|
|
tmp |= PCI_COMMAND_MASTER;
|
|
pci_write_config_word(pdev, PCI_COMMAND, tmp16);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void ahci_print_info(struct ahci_probe_ent *probe_ent)
|
|
{
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
pci_dev_t pdev = probe_ent->dev;
|
|
u16 cc;
|
|
#endif
|
|
volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
|
|
u32 vers, cap, cap2, impl, speed;
|
|
const char *speed_s;
|
|
const char *scc_s;
|
|
|
|
vers = readl(mmio + HOST_VERSION);
|
|
cap = probe_ent->cap;
|
|
cap2 = readl(mmio + HOST_CAP2);
|
|
impl = probe_ent->port_map;
|
|
|
|
speed = (cap >> 20) & 0xf;
|
|
if (speed == 1)
|
|
speed_s = "1.5";
|
|
else if (speed == 2)
|
|
speed_s = "3";
|
|
else if (speed == 3)
|
|
speed_s = "6";
|
|
else
|
|
speed_s = "?";
|
|
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
scc_s = "SATA";
|
|
#else
|
|
pci_read_config_word(pdev, 0x0a, &cc);
|
|
if (cc == 0x0101)
|
|
scc_s = "IDE";
|
|
else if (cc == 0x0106)
|
|
scc_s = "SATA";
|
|
else if (cc == 0x0104)
|
|
scc_s = "RAID";
|
|
else
|
|
scc_s = "unknown";
|
|
#endif
|
|
printf("AHCI %02x%02x.%02x%02x "
|
|
"%u slots %u ports %s Gbps 0x%x impl %s mode\n",
|
|
(vers >> 24) & 0xff,
|
|
(vers >> 16) & 0xff,
|
|
(vers >> 8) & 0xff,
|
|
vers & 0xff,
|
|
((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
|
|
|
|
printf("flags: "
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s\n",
|
|
cap & (1 << 31) ? "64bit " : "",
|
|
cap & (1 << 30) ? "ncq " : "",
|
|
cap & (1 << 28) ? "ilck " : "",
|
|
cap & (1 << 27) ? "stag " : "",
|
|
cap & (1 << 26) ? "pm " : "",
|
|
cap & (1 << 25) ? "led " : "",
|
|
cap & (1 << 24) ? "clo " : "",
|
|
cap & (1 << 19) ? "nz " : "",
|
|
cap & (1 << 18) ? "only " : "",
|
|
cap & (1 << 17) ? "pmp " : "",
|
|
cap & (1 << 16) ? "fbss " : "",
|
|
cap & (1 << 15) ? "pio " : "",
|
|
cap & (1 << 14) ? "slum " : "",
|
|
cap & (1 << 13) ? "part " : "",
|
|
cap & (1 << 7) ? "ccc " : "",
|
|
cap & (1 << 6) ? "ems " : "",
|
|
cap & (1 << 5) ? "sxs " : "",
|
|
cap2 & (1 << 2) ? "apst " : "",
|
|
cap2 & (1 << 1) ? "nvmp " : "",
|
|
cap2 & (1 << 0) ? "boh " : "");
|
|
}
|
|
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
static int ahci_init_one(pci_dev_t pdev)
|
|
{
|
|
u16 vendor;
|
|
int rc;
|
|
|
|
probe_ent = malloc(sizeof(struct ahci_probe_ent));
|
|
if (!probe_ent) {
|
|
printf("%s: No memory for probe_ent\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
|
|
probe_ent->dev = pdev;
|
|
|
|
probe_ent->host_flags = ATA_FLAG_SATA
|
|
| ATA_FLAG_NO_LEGACY
|
|
| ATA_FLAG_MMIO
|
|
| ATA_FLAG_PIO_DMA
|
|
| ATA_FLAG_NO_ATAPI;
|
|
probe_ent->pio_mask = 0x1f;
|
|
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
|
|
|
|
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base);
|
|
debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base);
|
|
|
|
/* Take from kernel:
|
|
* JMicron-specific fixup:
|
|
* make sure we're in AHCI mode
|
|
*/
|
|
pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor);
|
|
if (vendor == 0x197b)
|
|
pci_write_config_byte(pdev, 0x41, 0xa1);
|
|
|
|
/* initialize adapter */
|
|
rc = ahci_host_init(probe_ent);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
ahci_print_info(probe_ent);
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
return rc;
|
|
}
|
|
#endif
|
|
|
|
#define MAX_DATA_BYTE_COUNT (4*1024*1024)
|
|
|
|
static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len)
|
|
{
|
|
struct ahci_ioports *pp = &(probe_ent->port[port]);
|
|
struct ahci_sg *ahci_sg = pp->cmd_tbl_sg;
|
|
u32 sg_count;
|
|
int i;
|
|
|
|
sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1;
|
|
if (sg_count > AHCI_MAX_SG) {
|
|
printf("Error:Too much sg!\n");
|
|
return -1;
|
|
}
|
|
|
|
for (i = 0; i < sg_count; i++) {
|
|
ahci_sg->addr =
|
|
cpu_to_le32((u32) buf + i * MAX_DATA_BYTE_COUNT);
|
|
ahci_sg->addr_hi = 0;
|
|
ahci_sg->flags_size = cpu_to_le32(0x3fffff &
|
|
(buf_len < MAX_DATA_BYTE_COUNT
|
|
? (buf_len - 1)
|
|
: (MAX_DATA_BYTE_COUNT - 1)));
|
|
ahci_sg++;
|
|
buf_len -= MAX_DATA_BYTE_COUNT;
|
|
}
|
|
|
|
return sg_count;
|
|
}
|
|
|
|
|
|
static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts)
|
|
{
|
|
pp->cmd_slot->opts = cpu_to_le32(opts);
|
|
pp->cmd_slot->status = 0;
|
|
pp->cmd_slot->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff);
|
|
pp->cmd_slot->tbl_addr_hi = 0;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_AHCI_SETFEATURES_XFER
|
|
static void ahci_set_feature(u8 port)
|
|
{
|
|
struct ahci_ioports *pp = &(probe_ent->port[port]);
|
|
volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
|
|
u32 cmd_fis_len = 5; /* five dwords */
|
|
u8 fis[20];
|
|
|
|
/* set feature */
|
|
memset(fis, 0, sizeof(fis));
|
|
fis[0] = 0x27;
|
|
fis[1] = 1 << 7;
|
|
fis[2] = ATA_CMD_SET_FEATURES;
|
|
fis[3] = SETFEATURES_XFER;
|
|
fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
|
|
|
|
memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis));
|
|
ahci_fill_cmd_slot(pp, cmd_fis_len);
|
|
ahci_dcache_flush_sata_cmd(pp);
|
|
writel(1, port_mmio + PORT_CMD_ISSUE);
|
|
readl(port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
|
|
WAIT_MS_DATAIO, 0x1)) {
|
|
printf("set feature error on port %d!\n", port);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
static int ahci_port_start(u8 port)
|
|
{
|
|
struct ahci_ioports *pp = &(probe_ent->port[port]);
|
|
volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
|
|
u32 port_status;
|
|
u32 mem;
|
|
|
|
debug("Enter start port: %d\n", port);
|
|
port_status = readl(port_mmio + PORT_SCR_STAT);
|
|
debug("Port %d status: %x\n", port, port_status);
|
|
if ((port_status & 0xf) != 0x03) {
|
|
printf("No Link on this port!\n");
|
|
return -1;
|
|
}
|
|
|
|
mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
|
|
if (!mem) {
|
|
free(pp);
|
|
printf("%s: No mem for table!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mem = (mem + 0x800) & (~0x7ff); /* Aligned to 2048-bytes */
|
|
memset((u8 *) mem, 0, AHCI_PORT_PRIV_DMA_SZ);
|
|
|
|
/*
|
|
* First item in chunk of DMA memory: 32-slot command table,
|
|
* 32 bytes each in size
|
|
*/
|
|
pp->cmd_slot =
|
|
(struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
|
|
debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot);
|
|
mem += (AHCI_CMD_SLOT_SZ + 224);
|
|
|
|
/*
|
|
* Second item: Received-FIS area
|
|
*/
|
|
pp->rx_fis = virt_to_phys((void *)mem);
|
|
mem += AHCI_RX_FIS_SZ;
|
|
|
|
/*
|
|
* Third item: data area for storing a single command
|
|
* and its scatter-gather table
|
|
*/
|
|
pp->cmd_tbl = virt_to_phys((void *)mem);
|
|
debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
|
|
|
|
mem += AHCI_CMD_TBL_HDR;
|
|
pp->cmd_tbl_sg =
|
|
(struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
|
|
|
|
writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
|
|
|
|
writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR);
|
|
|
|
#ifdef CONFIG_SUNXI_AHCI
|
|
sunxi_dma_init(port_mmio);
|
|
#endif
|
|
|
|
writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX |
|
|
PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP |
|
|
PORT_CMD_START, port_mmio + PORT_CMD);
|
|
|
|
debug("Exit start port %d\n", port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf,
|
|
int buf_len, u8 is_write)
|
|
{
|
|
|
|
struct ahci_ioports *pp = &(probe_ent->port[port]);
|
|
volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
|
|
u32 opts;
|
|
u32 port_status;
|
|
int sg_count;
|
|
|
|
debug("Enter %s: for port %d\n", __func__, port);
|
|
|
|
if (port > probe_ent->n_ports) {
|
|
printf("Invalid port number %d\n", port);
|
|
return -1;
|
|
}
|
|
|
|
port_status = readl(port_mmio + PORT_SCR_STAT);
|
|
if ((port_status & 0xf) != 0x03) {
|
|
debug("No Link on port %d!\n", port);
|
|
return -1;
|
|
}
|
|
|
|
memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
|
|
|
|
sg_count = ahci_fill_sg(port, buf, buf_len);
|
|
opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
|
|
ahci_fill_cmd_slot(pp, opts);
|
|
|
|
ahci_dcache_flush_sata_cmd(pp);
|
|
ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len);
|
|
|
|
writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
|
|
WAIT_MS_DATAIO, 0x1)) {
|
|
printf("timeout exit!\n");
|
|
return -1;
|
|
}
|
|
|
|
ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len);
|
|
debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static char *ata_id_strcpy(u16 *target, u16 *src, int len)
|
|
{
|
|
int i;
|
|
for (i = 0; i < len / 2; i++)
|
|
target[i] = swab16(src[i]);
|
|
return (char *)target;
|
|
}
|
|
|
|
/*
|
|
* SCSI INQUIRY command operation.
|
|
*/
|
|
static int ata_scsiop_inquiry(ccb *pccb)
|
|
{
|
|
static const u8 hdr[] = {
|
|
0,
|
|
0,
|
|
0x5, /* claim SPC-3 version compatibility */
|
|
2,
|
|
95 - 4,
|
|
};
|
|
u8 fis[20];
|
|
u16 *idbuf;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
|
|
u8 port;
|
|
|
|
/* Clean ccb data buffer */
|
|
memset(pccb->pdata, 0, pccb->datalen);
|
|
|
|
memcpy(pccb->pdata, hdr, sizeof(hdr));
|
|
|
|
if (pccb->datalen <= 35)
|
|
return 0;
|
|
|
|
memset(fis, 0, sizeof(fis));
|
|
/* Construct the FIS */
|
|
fis[0] = 0x27; /* Host to device FIS. */
|
|
fis[1] = 1 << 7; /* Command FIS. */
|
|
fis[2] = ATA_CMD_ID_ATA; /* Command byte. */
|
|
|
|
/* Read id from sata */
|
|
port = pccb->target;
|
|
|
|
if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
|
|
ATA_ID_WORDS * 2, 0)) {
|
|
debug("scsi_ahci: SCSI inquiry command failure.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (!ataid[port]) {
|
|
ataid[port] = malloc(ATA_ID_WORDS * 2);
|
|
if (!ataid[port]) {
|
|
printf("%s: No memory for ataid[port]\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
idbuf = ataid[port];
|
|
|
|
memcpy(idbuf, tmpid, ATA_ID_WORDS * 2);
|
|
ata_swap_buf_le16(idbuf, ATA_ID_WORDS);
|
|
|
|
memcpy(&pccb->pdata[8], "ATA ", 8);
|
|
ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16);
|
|
ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4);
|
|
|
|
#ifdef DEBUG
|
|
ata_dump_id(idbuf);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* SCSI READ10/WRITE10 command operation.
|
|
*/
|
|
static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
|
|
{
|
|
u32 lba = 0;
|
|
u16 blocks = 0;
|
|
u8 fis[20];
|
|
u8 *user_buffer = pccb->pdata;
|
|
u32 user_buffer_size = pccb->datalen;
|
|
|
|
/* Retrieve the base LBA number from the ccb structure. */
|
|
memcpy(&lba, pccb->cmd + 2, sizeof(lba));
|
|
lba = be32_to_cpu(lba);
|
|
|
|
/*
|
|
* And the number of blocks.
|
|
*
|
|
* For 10-byte and 16-byte SCSI R/W commands, transfer
|
|
* length 0 means transfer 0 block of data.
|
|
* However, for ATA R/W commands, sector count 0 means
|
|
* 256 or 65536 sectors, not 0 sectors as in SCSI.
|
|
*
|
|
* WARNING: one or two older ATA drives treat 0 as 0...
|
|
*/
|
|
blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
|
|
|
|
debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n",
|
|
is_write ? "write" : "read", (unsigned)lba, blocks);
|
|
|
|
/* Preset the FIS */
|
|
memset(fis, 0, sizeof(fis));
|
|
fis[0] = 0x27; /* Host to device FIS. */
|
|
fis[1] = 1 << 7; /* Command FIS. */
|
|
/* Command byte (read/write). */
|
|
fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
|
|
|
|
while (blocks) {
|
|
u16 now_blocks; /* number of blocks per iteration */
|
|
u32 transfer_size; /* number of bytes per iteration */
|
|
|
|
now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
|
|
|
|
transfer_size = ATA_SECT_SIZE * now_blocks;
|
|
if (transfer_size > user_buffer_size) {
|
|
printf("scsi_ahci: Error: buffer too small.\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* LBA48 SATA command but only use 32bit address range within
|
|
* that. The next smaller command range (28bit) is too small.
|
|
*/
|
|
fis[4] = (lba >> 0) & 0xff;
|
|
fis[5] = (lba >> 8) & 0xff;
|
|
fis[6] = (lba >> 16) & 0xff;
|
|
fis[7] = 1 << 6; /* device reg: set LBA mode */
|
|
fis[8] = ((lba >> 24) & 0xff);
|
|
fis[3] = 0xe0; /* features */
|
|
|
|
/* Block (sector) count */
|
|
fis[12] = (now_blocks >> 0) & 0xff;
|
|
fis[13] = (now_blocks >> 8) & 0xff;
|
|
|
|
/* Read/Write from ahci */
|
|
if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis),
|
|
user_buffer, user_buffer_size,
|
|
is_write)) {
|
|
debug("scsi_ahci: SCSI %s10 command failure.\n",
|
|
is_write ? "WRITE" : "READ");
|
|
return -EIO;
|
|
}
|
|
|
|
/* If this transaction is a write, do a following flush.
|
|
* Writes in u-boot are so rare, and the logic to know when is
|
|
* the last write and do a flush only there is sufficiently
|
|
* difficult. Just do a flush after every write. This incurs,
|
|
* usually, one extra flush when the rare writes do happen.
|
|
*/
|
|
if (is_write) {
|
|
if (-EIO == ata_io_flush(pccb->target))
|
|
return -EIO;
|
|
}
|
|
user_buffer += transfer_size;
|
|
user_buffer_size -= transfer_size;
|
|
blocks -= now_blocks;
|
|
lba += now_blocks;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* SCSI READ CAPACITY10 command operation.
|
|
*/
|
|
static int ata_scsiop_read_capacity10(ccb *pccb)
|
|
{
|
|
u32 cap;
|
|
u64 cap64;
|
|
u32 block_size;
|
|
|
|
if (!ataid[pccb->target]) {
|
|
printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
|
|
"\tNo ATA info!\n"
|
|
"\tPlease run SCSI commmand INQUIRY firstly!\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
cap64 = ata_id_n_sectors(ataid[pccb->target]);
|
|
if (cap64 > 0x100000000ULL)
|
|
cap64 = 0xffffffff;
|
|
|
|
cap = cpu_to_be32(cap64);
|
|
memcpy(pccb->pdata, &cap, sizeof(cap));
|
|
|
|
block_size = cpu_to_be32((u32)512);
|
|
memcpy(&pccb->pdata[4], &block_size, 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* SCSI READ CAPACITY16 command operation.
|
|
*/
|
|
static int ata_scsiop_read_capacity16(ccb *pccb)
|
|
{
|
|
u64 cap;
|
|
u64 block_size;
|
|
|
|
if (!ataid[pccb->target]) {
|
|
printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
|
|
"\tNo ATA info!\n"
|
|
"\tPlease run SCSI commmand INQUIRY firstly!\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
cap = ata_id_n_sectors(ataid[pccb->target]);
|
|
cap = cpu_to_be64(cap);
|
|
memcpy(pccb->pdata, &cap, sizeof(cap));
|
|
|
|
block_size = cpu_to_be64((u64)512);
|
|
memcpy(&pccb->pdata[8], &block_size, 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* SCSI TEST UNIT READY command operation.
|
|
*/
|
|
static int ata_scsiop_test_unit_ready(ccb *pccb)
|
|
{
|
|
return (ataid[pccb->target]) ? 0 : -EPERM;
|
|
}
|
|
|
|
|
|
int scsi_exec(ccb *pccb)
|
|
{
|
|
int ret;
|
|
|
|
switch (pccb->cmd[0]) {
|
|
case SCSI_READ10:
|
|
ret = ata_scsiop_read_write(pccb, 0);
|
|
break;
|
|
case SCSI_WRITE10:
|
|
ret = ata_scsiop_read_write(pccb, 1);
|
|
break;
|
|
case SCSI_RD_CAPAC10:
|
|
ret = ata_scsiop_read_capacity10(pccb);
|
|
break;
|
|
case SCSI_RD_CAPAC16:
|
|
ret = ata_scsiop_read_capacity16(pccb);
|
|
break;
|
|
case SCSI_TST_U_RDY:
|
|
ret = ata_scsiop_test_unit_ready(pccb);
|
|
break;
|
|
case SCSI_INQUIRY:
|
|
ret = ata_scsiop_inquiry(pccb);
|
|
break;
|
|
default:
|
|
printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]);
|
|
return false;
|
|
}
|
|
|
|
if (ret) {
|
|
debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret);
|
|
return false;
|
|
}
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
void scsi_low_level_init(int busdevfunc)
|
|
{
|
|
int i;
|
|
u32 linkmap;
|
|
|
|
#ifndef CONFIG_SCSI_AHCI_PLAT
|
|
ahci_init_one(busdevfunc);
|
|
#endif
|
|
|
|
linkmap = probe_ent->link_port_map;
|
|
|
|
for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
|
|
if (((linkmap >> i) & 0x01)) {
|
|
if (ahci_port_start((u8) i)) {
|
|
printf("Can not start port %d\n", i);
|
|
continue;
|
|
}
|
|
#ifdef CONFIG_AHCI_SETFEATURES_XFER
|
|
ahci_set_feature((u8) i);
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SCSI_AHCI_PLAT
|
|
int ahci_init(u32 base)
|
|
{
|
|
int i, rc = 0;
|
|
u32 linkmap;
|
|
|
|
probe_ent = malloc(sizeof(struct ahci_probe_ent));
|
|
if (!probe_ent) {
|
|
printf("%s: No memory for probe_ent\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
|
|
|
|
probe_ent->host_flags = ATA_FLAG_SATA
|
|
| ATA_FLAG_NO_LEGACY
|
|
| ATA_FLAG_MMIO
|
|
| ATA_FLAG_PIO_DMA
|
|
| ATA_FLAG_NO_ATAPI;
|
|
probe_ent->pio_mask = 0x1f;
|
|
probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */
|
|
|
|
probe_ent->mmio_base = base;
|
|
|
|
/* initialize adapter */
|
|
rc = ahci_host_init(probe_ent);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
ahci_print_info(probe_ent);
|
|
|
|
linkmap = probe_ent->link_port_map;
|
|
|
|
for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
|
|
if (((linkmap >> i) & 0x01)) {
|
|
if (ahci_port_start((u8) i)) {
|
|
printf("Can not start port %d\n", i);
|
|
continue;
|
|
}
|
|
#ifdef CONFIG_AHCI_SETFEATURES_XFER
|
|
ahci_set_feature((u8) i);
|
|
#endif
|
|
}
|
|
}
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
void __weak scsi_init(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* In the general case of generic rotating media it makes sense to have a
|
|
* flush capability. It probably even makes sense in the case of SSDs because
|
|
* one cannot always know for sure what kind of internal cache/flush mechanism
|
|
* is embodied therein. At first it was planned to invoke this after the last
|
|
* write to disk and before rebooting. In practice, knowing, a priori, which
|
|
* is the last write is difficult. Because writing to the disk in u-boot is
|
|
* very rare, this flush command will be invoked after every block write.
|
|
*/
|
|
static int ata_io_flush(u8 port)
|
|
{
|
|
u8 fis[20];
|
|
struct ahci_ioports *pp = &(probe_ent->port[port]);
|
|
volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
|
|
u32 cmd_fis_len = 5; /* five dwords */
|
|
|
|
/* Preset the FIS */
|
|
memset(fis, 0, 20);
|
|
fis[0] = 0x27; /* Host to device FIS. */
|
|
fis[1] = 1 << 7; /* Command FIS. */
|
|
fis[2] = ATA_CMD_FLUSH_EXT;
|
|
|
|
memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
|
|
ahci_fill_cmd_slot(pp, cmd_fis_len);
|
|
writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
|
|
WAIT_MS_FLUSH, 0x1)) {
|
|
debug("scsi_ahci: flush command timeout on port %d.\n", port);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
__weak void scsi_bus_reset(void)
|
|
{
|
|
/*Not implement*/
|
|
}
|
|
|
|
void scsi_print_error(ccb * pccb)
|
|
{
|
|
/*The ahci error info can be read in the ahci driver*/
|
|
}
|