u-boot/common/cmd_flash.c
Stefan Roese f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00

751 lines
19 KiB
C

/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* FLASH support
*/
#include <common.h>
#include <command.h>
#ifdef CONFIG_HAS_DATAFLASH
#include <dataflash.h>
#endif
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
#include <jffs2/jffs2.h>
/* parition handling routines */
int mtdparts_init(void);
int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
#ifndef CFG_NO_FLASH
extern flash_info_t flash_info[]; /* info for FLASH chips */
/*
* The user interface starts numbering for Flash banks with 1
* for historical reasons.
*/
/*
* this routine looks for an abbreviated flash range specification.
* the syntax is B:SF[-SL], where B is the bank number, SF is the first
* sector to erase, and SL is the last sector to erase (defaults to SF).
* bank numbers start at 1 to be consistent with other specs, sector numbers
* start at zero.
*
* returns: 1 - correct spec; *pinfo, *psf and *psl are
* set appropriately
* 0 - doesn't look like an abbreviated spec
* -1 - looks like an abbreviated spec, but got
* a parsing error, a number out of range,
* or an invalid flash bank.
*/
static int
abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
{
flash_info_t *fp;
int bank, first, last;
char *p, *ep;
if ((p = strchr (str, ':')) == NULL)
return 0;
*p++ = '\0';
bank = simple_strtoul (str, &ep, 10);
if (ep == str || *ep != '\0' ||
bank < 1 || bank > CFG_MAX_FLASH_BANKS ||
(fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN)
return -1;
str = p;
if ((p = strchr (str, '-')) != NULL)
*p++ = '\0';
first = simple_strtoul (str, &ep, 10);
if (ep == str || *ep != '\0' || first >= fp->sector_count)
return -1;
if (p != NULL) {
last = simple_strtoul (p, &ep, 10);
if (ep == p || *ep != '\0' ||
last < first || last >= fp->sector_count)
return -1;
} else {
last = first;
}
*pinfo = fp;
*psf = first;
*psl = last;
return 1;
}
/*
* This function computes the start and end addresses for both
* erase and protect commands. The range of the addresses on which
* either of the commands is to operate can be given in two forms:
* 1. <cmd> start end - operate on <'start', 'end')
* 2. <cmd> start +length - operate on <'start', start + length)
* If the second form is used and the end address doesn't fall on the
* sector boundary, than it will be adjusted to the next sector boundary.
* If it isn't in the flash, the function will fail (return -1).
* Input:
* arg1, arg2: address specification (i.e. both command arguments)
* Output:
* addr_first, addr_last: computed address range
* Return:
* 1: success
* -1: failure (bad format, bad address).
*/
static int
addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
{
char *ep;
char len_used; /* indicates if the "start +length" form used */
char found;
ulong bank;
*addr_first = simple_strtoul(arg1, &ep, 16);
if (ep == arg1 || *ep != '\0')
return -1;
len_used = 0;
if (arg2 && *arg2 == '+'){
len_used = 1;
++arg2;
}
*addr_last = simple_strtoul(arg2, &ep, 16);
if (ep == arg2 || *ep != '\0')
return -1;
if (len_used){
/*
* *addr_last has the length, compute correct *addr_last
* XXX watch out for the integer overflow! Right now it is
* checked for in both the callers.
*/
*addr_last = *addr_first + *addr_last - 1;
/*
* It may happen that *addr_last doesn't fall on the sector
* boundary. We want to round such an address to the next
* sector boundary, so that the commands don't fail later on.
*/
/* find the end addr of the sector where the *addr_last is */
found = 0;
for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
int i;
flash_info_t *info = &flash_info[bank];
for (i = 0; i < info->sector_count && !found; ++i){
/* get the end address of the sector */
ulong sector_end_addr;
if (i == info->sector_count - 1){
sector_end_addr =
info->start[0] + info->size - 1;
} else {
sector_end_addr =
info->start[i+1] - 1;
}
if (*addr_last <= sector_end_addr &&
*addr_last >= info->start[i]){
/* sector found */
found = 1;
/* adjust *addr_last if necessary */
if (*addr_last < sector_end_addr){
*addr_last = sector_end_addr;
}
}
} /* sector */
} /* bank */
if (!found){
/* error, addres not in flash */
printf("Error: end address (0x%08lx) not in flash!\n",
*addr_last);
return -1;
}
} /* "start +length" from used */
return 1;
}
static int
flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
int *s_first, int *s_last,
int *s_count )
{
flash_info_t *info;
ulong bank;
int rcode = 0;
*s_count = 0;
for (bank=0; bank < CFG_MAX_FLASH_BANKS; ++bank) {
s_first[bank] = -1; /* first sector to erase */
s_last [bank] = -1; /* last sector to erase */
}
for (bank=0,info = &flash_info[0];
(bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last);
++bank, ++info) {
ulong b_end;
int sect;
short s_end;
if (info->flash_id == FLASH_UNKNOWN) {
continue;
}
b_end = info->start[0] + info->size - 1; /* bank end addr */
s_end = info->sector_count - 1; /* last sector */
for (sect=0; sect < info->sector_count; ++sect) {
ulong end; /* last address in current sect */
end = (sect == s_end) ? b_end : info->start[sect + 1] - 1;
if (addr_first > end)
continue;
if (addr_last < info->start[sect])
continue;
if (addr_first == info->start[sect]) {
s_first[bank] = sect;
}
if (addr_last == end) {
s_last[bank] = sect;
}
}
if (s_first[bank] >= 0) {
if (s_last[bank] < 0) {
if (addr_last > b_end) {
s_last[bank] = s_end;
} else {
puts ("Error: end address"
" not on sector boundary\n");
rcode = 1;
break;
}
}
if (s_last[bank] < s_first[bank]) {
puts ("Error: end sector"
" precedes start sector\n");
rcode = 1;
break;
}
sect = s_last[bank];
addr_first = (sect == s_end) ? b_end + 1: info->start[sect + 1];
(*s_count) += s_last[bank] - s_first[bank] + 1;
} else if (addr_first >= info->start[0] && addr_first < b_end) {
puts ("Error: start address not on sector boundary\n");
rcode = 1;
break;
} else if (s_last[bank] >= 0) {
puts ("Error: cannot span across banks when they are"
" mapped in reverse order\n");
rcode = 1;
break;
}
}
return rcode;
}
#endif /* CFG_NO_FLASH */
int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#ifndef CFG_NO_FLASH
ulong bank;
#endif
#ifdef CONFIG_HAS_DATAFLASH
dataflash_print_info();
#endif
#ifndef CFG_NO_FLASH
if (argc == 1) { /* print info for all FLASH banks */
for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) {
printf ("\nBank # %ld: ", bank+1);
flash_print_info (&flash_info[bank]);
}
return 0;
}
bank = simple_strtoul(argv[1], NULL, 16);
if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
printf ("Only FLASH Banks # 1 ... # %d supported\n",
CFG_MAX_FLASH_BANKS);
return 1;
}
printf ("\nBank # %ld: ", bank);
flash_print_info (&flash_info[bank-1]);
#endif /* CFG_NO_FLASH */
return 0;
}
int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#ifndef CFG_NO_FLASH
flash_info_t *info;
ulong bank, addr_first, addr_last;
int n, sect_first, sect_last;
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
#endif
int rcode = 0;
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (strcmp(argv[1], "all") == 0) {
for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
printf ("Erase Flash Bank # %ld ", bank);
info = &flash_info[bank-1];
rcode = flash_erase (info, 0, info->sector_count-1);
}
return rcode;
}
if ((n = abbrev_spec(argv[1], &info, &sect_first, &sect_last)) != 0) {
if (n < 0) {
puts ("Bad sector specification\n");
return 1;
}
printf ("Erase Flash Sectors %d-%d in Bank # %zu ",
sect_first, sect_last, (info-flash_info)+1);
rcode = flash_erase(info, sect_first, sect_last);
return rcode;
}
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
/* erase <part-id> - erase partition */
if ((argc == 2) && (id_parse(argv[1], NULL, &dev_type, &dev_num) == 0)) {
mtdparts_init();
if (find_dev_and_part(argv[1], &dev, &pnum, &part) == 0) {
if (dev->id->type == MTD_DEV_TYPE_NOR) {
bank = dev->id->num;
info = &flash_info[bank];
addr_first = part->offset + info->start[0];
addr_last = addr_first + part->size - 1;
printf ("Erase Flash Parition %s, "
"bank %ld, 0x%08lx - 0x%08lx ",
argv[1], bank, addr_first,
addr_last);
rcode = flash_sect_erase(addr_first, addr_last);
return rcode;
}
printf("cannot erase, not a NOR device\n");
return 1;
}
}
#endif
if (argc != 3) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (strcmp(argv[1], "bank") == 0) {
bank = simple_strtoul(argv[2], NULL, 16);
if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
printf ("Only FLASH Banks # 1 ... # %d supported\n",
CFG_MAX_FLASH_BANKS);
return 1;
}
printf ("Erase Flash Bank # %ld ", bank);
info = &flash_info[bank-1];
rcode = flash_erase (info, 0, info->sector_count-1);
return rcode;
}
if (addr_spec(argv[1], argv[2], &addr_first, &addr_last) < 0){
printf ("Bad address format\n");
return 1;
}
if (addr_first >= addr_last) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
rcode = flash_sect_erase(addr_first, addr_last);
return rcode;
#else
return 0;
#endif /* CFG_NO_FLASH */
}
#ifndef CFG_NO_FLASH
int flash_sect_erase (ulong addr_first, ulong addr_last)
{
flash_info_t *info;
ulong bank;
#ifdef CFG_MAX_FLASH_BANKS_DETECT
int s_first[CFG_MAX_FLASH_BANKS_DETECT], s_last[CFG_MAX_FLASH_BANKS_DETECT];
#else
int s_first[CFG_MAX_FLASH_BANKS], s_last[CFG_MAX_FLASH_BANKS];
#endif
int erased = 0;
int planned;
int rcode = 0;
rcode = flash_fill_sect_ranges (addr_first, addr_last,
s_first, s_last, &planned );
if (planned && (rcode == 0)) {
for (bank=0,info = &flash_info[0];
(bank < CFG_MAX_FLASH_BANKS) && (rcode == 0);
++bank, ++info) {
if (s_first[bank]>=0) {
erased += s_last[bank] - s_first[bank] + 1;
debug ("Erase Flash from 0x%08lx to 0x%08lx "
"in Bank # %ld ",
info->start[s_first[bank]],
(s_last[bank] == info->sector_count) ?
info->start[0] + info->size - 1:
info->start[s_last[bank]+1] - 1,
bank+1);
rcode = flash_erase (info, s_first[bank], s_last[bank]);
}
}
printf ("Erased %d sectors\n", erased);
} else if (rcode == 0) {
puts ("Error: start and/or end address"
" not on sector boundary\n");
rcode = 1;
}
return rcode;
}
#endif /* CFG_NO_FLASH */
int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
#ifndef CFG_NO_FLASH
flash_info_t *info;
ulong bank;
int i, n, sect_first, sect_last;
#endif /* CFG_NO_FLASH */
ulong addr_first, addr_last;
int p;
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
#endif
int rcode = 0;
#ifdef CONFIG_HAS_DATAFLASH
int status;
#endif
if (argc < 3) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (strcmp(argv[1], "off") == 0) {
p = 0;
} else if (strcmp(argv[1], "on") == 0) {
p = 1;
} else {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
#ifdef CONFIG_HAS_DATAFLASH
if ((strcmp(argv[2], "all") != 0) && (strcmp(argv[2], "bank") != 0)) {
addr_first = simple_strtoul(argv[2], NULL, 16);
addr_last = simple_strtoul(argv[3], NULL, 16);
if (addr_dataflash(addr_first) && addr_dataflash(addr_last)) {
status = dataflash_real_protect(p,addr_first,addr_last);
if (status < 0){
puts ("Bad DataFlash sector specification\n");
return 1;
}
printf("%sProtect %d DataFlash Sectors\n",
p ? "" : "Un-", status);
return 0;
}
}
#endif
#ifndef CFG_NO_FLASH
if (strcmp(argv[2], "all") == 0) {
for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
info = &flash_info[bank-1];
if (info->flash_id == FLASH_UNKNOWN) {
continue;
}
printf ("%sProtect Flash Bank # %ld\n",
p ? "" : "Un-", bank);
for (i=0; i<info->sector_count; ++i) {
#if defined(CFG_FLASH_PROTECTION)
if (flash_real_protect(info, i, p))
rcode = 1;
putc ('.');
#else
info->protect[i] = p;
#endif /* CFG_FLASH_PROTECTION */
}
#if defined(CFG_FLASH_PROTECTION)
if (!rcode) puts (" done\n");
#endif /* CFG_FLASH_PROTECTION */
}
return rcode;
}
if ((n = abbrev_spec(argv[2], &info, &sect_first, &sect_last)) != 0) {
if (n < 0) {
puts ("Bad sector specification\n");
return 1;
}
printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n",
p ? "" : "Un-", sect_first, sect_last,
(info-flash_info)+1);
for (i = sect_first; i <= sect_last; i++) {
#if defined(CFG_FLASH_PROTECTION)
if (flash_real_protect(info, i, p))
rcode = 1;
putc ('.');
#else
info->protect[i] = p;
#endif /* CFG_FLASH_PROTECTION */
}
#if defined(CFG_FLASH_PROTECTION)
if (!rcode) puts (" done\n");
#endif /* CFG_FLASH_PROTECTION */
return rcode;
}
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
/* protect on/off <part-id> */
if ((argc == 3) && (id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
mtdparts_init();
if (find_dev_and_part(argv[2], &dev, &pnum, &part) == 0) {
if (dev->id->type == MTD_DEV_TYPE_NOR) {
bank = dev->id->num;
info = &flash_info[bank];
addr_first = part->offset + info->start[0];
addr_last = addr_first + part->size - 1;
printf ("%sProtect Flash Parition %s, "
"bank %ld, 0x%08lx - 0x%08lx\n",
p ? "" : "Un", argv[1],
bank, addr_first, addr_last);
rcode = flash_sect_protect (p, addr_first, addr_last);
return rcode;
}
printf("cannot %sprotect, not a NOR device\n",
p ? "" : "un");
return 1;
}
}
#endif
if (argc != 4) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (strcmp(argv[2], "bank") == 0) {
bank = simple_strtoul(argv[3], NULL, 16);
if ((bank < 1) || (bank > CFG_MAX_FLASH_BANKS)) {
printf ("Only FLASH Banks # 1 ... # %d supported\n",
CFG_MAX_FLASH_BANKS);
return 1;
}
printf ("%sProtect Flash Bank # %ld\n",
p ? "" : "Un-", bank);
info = &flash_info[bank-1];
if (info->flash_id == FLASH_UNKNOWN) {
puts ("missing or unknown FLASH type\n");
return 1;
}
for (i=0; i<info->sector_count; ++i) {
#if defined(CFG_FLASH_PROTECTION)
if (flash_real_protect(info, i, p))
rcode = 1;
putc ('.');
#else
info->protect[i] = p;
#endif /* CFG_FLASH_PROTECTION */
}
#if defined(CFG_FLASH_PROTECTION)
if (!rcode) puts (" done\n");
#endif /* CFG_FLASH_PROTECTION */
return rcode;
}
if (addr_spec(argv[2], argv[3], &addr_first, &addr_last) < 0){
printf("Bad address format\n");
return 1;
}
if (addr_first >= addr_last) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
rcode = flash_sect_protect (p, addr_first, addr_last);
#endif /* CFG_NO_FLASH */
return rcode;
}
#ifndef CFG_NO_FLASH
int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
{
flash_info_t *info;
ulong bank;
#ifdef CFG_MAX_FLASH_BANKS_DETECT
int s_first[CFG_MAX_FLASH_BANKS_DETECT], s_last[CFG_MAX_FLASH_BANKS_DETECT];
#else
int s_first[CFG_MAX_FLASH_BANKS], s_last[CFG_MAX_FLASH_BANKS];
#endif
int protected, i;
int planned;
int rcode;
rcode = flash_fill_sect_ranges( addr_first, addr_last, s_first, s_last, &planned );
protected = 0;
if (planned && (rcode == 0)) {
for (bank=0,info = &flash_info[0]; bank < CFG_MAX_FLASH_BANKS; ++bank, ++info) {
if (info->flash_id == FLASH_UNKNOWN) {
continue;
}
if (s_first[bank]>=0 && s_first[bank]<=s_last[bank]) {
debug ("%sProtecting sectors %d..%d in bank %ld\n",
p ? "" : "Un-",
s_first[bank], s_last[bank], bank+1);
protected += s_last[bank] - s_first[bank] + 1;
for (i=s_first[bank]; i<=s_last[bank]; ++i) {
#if defined(CFG_FLASH_PROTECTION)
if (flash_real_protect(info, i, p))
rcode = 1;
putc ('.');
#else
info->protect[i] = p;
#endif /* CFG_FLASH_PROTECTION */
}
}
}
#if defined(CFG_FLASH_PROTECTION)
puts (" done\n");
#endif /* CFG_FLASH_PROTECTION */
printf ("%sProtected %d sectors\n",
p ? "" : "Un-", protected);
} else if (rcode == 0) {
puts ("Error: start and/or end address"
" not on sector boundary\n");
rcode = 1;
}
return rcode;
}
#endif /* CFG_NO_FLASH */
/**************************************************/
#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
# define TMP_ERASE "erase <part-id>\n - erase partition\n"
# define TMP_PROT_ON "protect on <part-id>\n - protect partition\n"
# define TMP_PROT_OFF "protect off <part-id>\n - make partition writable\n"
#else
# define TMP_ERASE /* empty */
# define TMP_PROT_ON /* empty */
# define TMP_PROT_OFF /* empty */
#endif
U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
"flinfo - print FLASH memory information\n",
"\n - print information for all FLASH memory banks\n"
"flinfo N\n - print information for FLASH memory bank # N\n"
);
U_BOOT_CMD(
erase, 3, 0, do_flerase,
"erase - erase FLASH memory\n",
"start end\n"
" - erase FLASH from addr 'start' to addr 'end'\n"
"erase start +len\n"
" - erase FLASH from addr 'start' to the end of sect "
"w/addr 'start'+'len'-1\n"
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
TMP_ERASE
"erase all\n - erase all FLASH banks\n"
);
U_BOOT_CMD(
protect, 4, 0, do_protect,
"protect - enable or disable FLASH write protection\n",
"on start end\n"
" - protect FLASH from addr 'start' to addr 'end'\n"
"protect on start +len\n"
" - protect FLASH from addr 'start' to end of sect "
"w/addr 'start'+'len'-1\n"
"protect on N:SF[-SL]\n"
" - protect sectors SF-SL in FLASH bank # N\n"
"protect on bank N\n - protect FLASH bank # N\n"
TMP_PROT_ON
"protect on all\n - protect all FLASH banks\n"
"protect off start end\n"
" - make FLASH from addr 'start' to addr 'end' writable\n"
"protect off start +len\n"
" - make FLASH from addr 'start' to end of sect "
"w/addr 'start'+'len'-1 wrtable\n"
"protect off N:SF[-SL]\n"
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"
TMP_PROT_OFF
"protect off all\n - make all FLASH banks writable\n"
);
#undef TMP_ERASE
#undef TMP_PROT_ON
#undef TMP_PROT_OFF