u-boot/board/cobra5272/flash.c
Simon Glass 24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00

366 lines
7.2 KiB
C

/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <console.h>
#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
#define FLASH_BANK_SIZE 0x200000
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
void flash_print_info (flash_info_t * info)
{
int i;
switch (info->flash_id & FLASH_VENDMASK) {
case (AMD_MANUFACT & FLASH_VENDMASK):
printf ("AMD: ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case (AMD_ID_PL160CB & FLASH_TYPEMASK):
printf ("AM29PL160CB (16Mbit)\n");
break;
default:
printf ("Unknown Chip Type\n");
goto Done;
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) {
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
Done:
return;
}
unsigned long flash_init (void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_PL160CB & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
if (i == 0)
flashbase = PHYS_FLASH_1;
else
panic ("configured to many flash banks!\n");
for (j = 0; j < flash_info[i].sector_count; j++) {
if (j == 0) {
/* 1st is 16 KiB */
flash_info[i].start[j] = flashbase;
}
if ((j >= 1) && (j <= 2)) {
/* 2nd and 3rd are 8 KiB */
flash_info[i].start[j] =
flashbase + 0x4000 + 0x2000 * (j - 1);
}
if (j == 3) {
/* 4th is 224 KiB */
flash_info[i].start[j] = flashbase + 0x8000;
}
if ((j >= 4) && (j <= 10)) {
/* rest is 256 KiB */
flash_info[i].start[j] =
flashbase + 0x40000 + 0x40000 * (j -
4);
}
}
size += flash_info[i].size;
}
flash_protect (FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
return size;
}
#define CMD_READ_ARRAY 0x00F0
#define CMD_UNLOCK1 0x00AA
#define CMD_UNLOCK2 0x0055
#define CMD_ERASE_SETUP 0x0080
#define CMD_ERASE_CONFIRM 0x0030
#define CMD_PROGRAM 0x00A0
#define CMD_UNLOCK_BYPASS 0x0020
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
#define BIT_PROGRAM_ERROR 0x0020
#define BIT_TIMEOUT 0x80000000 /* our flag */
#define READY 1
#define ERR 2
#define TMO 4
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
ulong result;
int iflag, cflag, prot, sect;
int rc = ERR_OK;
int chip1;
ulong start;
/* first look for protection bits */
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
if ((s_first < 0) || (s_first > s_last)) {
return ERR_INVAL;
}
if ((info->flash_id & FLASH_VENDMASK) !=
(AMD_MANUFACT & FLASH_VENDMASK)) {
return ERR_UNKNOWN_FLASH_VENDOR;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
return ERR_PROTECTED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status ();
icache_disable ();
iflag = disable_interrupts ();
printf ("\n");
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
printf ("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
start = get_timer(0);
if (info->protect[sect] == 0) { /* not protected */
volatile u16 *addr =
(volatile u16 *) (info->start[sect]);
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
*addr = CMD_ERASE_CONFIRM;
/* wait until flash is ready */
chip1 = 0;
do {
result = *addr;
/* check timeout */
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
}
if (!chip1
&& (result & 0xFFFF) & BIT_ERASE_DONE)
chip1 = READY;
} while (!chip1);
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
if (chip1 == ERR) {
rc = ERR_PROG_ERROR;
goto outahere;
}
if (chip1 == TMO) {
rc = ERR_TIMOUT;
goto outahere;
}
printf ("ok.\n");
} else { /* it was protected */
printf ("protected!\n");
}
}
if (ctrlc ())
printf ("User Interrupt!\n");
outahere:
/* allow flash to settle - wait 10 ms */
udelay (10000);
if (iflag)
enable_interrupts ();
if (cflag)
icache_enable ();
return rc;
}
static int write_word (flash_info_t * info, ulong dest, ulong data)
{
volatile u16 *addr = (volatile u16 *) dest;
ulong result;
int rc = ERR_OK;
int cflag, iflag;
int chip1;
ulong start;
/*
* Check if Flash is (sufficiently) erased
*/
result = *addr;
if ((result & data) != data)
return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status ();
icache_disable ();
iflag = disable_interrupts ();
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_PROGRAM;
*addr = data;
/* arm simple, non interrupt dependent timer */
start = get_timer(0);
/* wait until flash is ready */
chip1 = 0;
do {
result = *addr;
/* check timeout */
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
chip1 = ERR | TMO;
break;
}
if (!chip1 && ((result & 0x80) == (data & 0x80)))
chip1 = READY;
} while (!chip1);
*addr = CMD_READ_ARRAY;
if (chip1 == ERR || *addr != data)
rc = ERR_PROG_ERROR;
if (iflag)
enable_interrupts ();
if (cflag)
icache_enable ();
return rc;
}
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong wp, data;
int rc;
if (addr & 1) {
printf ("unaligned destination not supported\n");
return ERR_ALIGN;
}
#if 0
if (cnt & 1) {
printf ("odd transfer sizes not supported\n");
return ERR_ALIGN;
}
#endif
wp = addr;
if (addr & 1) {
data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
src);
if ((rc = write_word (info, wp - 1, data)) != 0) {
return (rc);
}
src += 1;
wp += 1;
cnt -= 1;
}
while (cnt >= 2) {
data = *((volatile u16 *) src);
if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
src += 2;
wp += 2;
cnt -= 2;
}
if (cnt == 1) {
data = (*((volatile u8 *) src) << 8) |
*((volatile u8 *) (wp + 1));
if ((rc = write_word (info, wp, data)) != 0) {
return (rc);
}
src += 1;
wp += 1;
cnt -= 1;
}
return ERR_OK;
}