u-boot/include/configs/Yukon8220.h

318 lines
9.2 KiB
C

/*
* (C) Copyright 2004
* TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MPC8220 1
#define CONFIG_YUKON8220 1 /* ... on Yukon board */
/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
determine the CPU speed. */
#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */
#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
/* Define this for PSC console
#define CONFIG_PSC_CONSOLE 1
*/
#define CONFIG_EXTUART_CONSOLE 1
#ifdef CONFIG_EXTUART_CONSOLE
# define CONFIG_CONS_INDEX 1
# define CFG_NS16550_SERIAL
# define CFG_NS16550
# define CFG_NS16550_REG_SIZE 1
# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008)
# define CFG_NS16550_CLK 18432000
#endif
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Supported commands
*/
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BOOTD | \
CFG_CMD_CACHE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
#define CONFIG_NET_MULTI
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTARGS "root=/dev/ram rw"
#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
#define CONFIG_IPADDR 192.162.1.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.162.1.1
#define CONFIG_GATEWAYIP 192.162.1.1
#define CONFIG_HOSTNAME yukon
#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1
#define CFG_I2C_MODULE 1
#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
* EEPROM configuration
*/
#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 3
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
/*
#define CFG_ENV_IS_IN_EEPROM 1
#define CFG_ENV_OFFSET 0
#define CFG_ENV_SIZE 256
*/
/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
else undefined it will boot from Intel Strata flash */
#define CFG_AMD_BOOT 1
/*
* Flexbus Chipselect configuration
*/
#if defined (CFG_AMD_BOOT)
#define CFG_CS0_BASE 0xfff0
#define CFG_CS0_MASK 0x00080000 /* 512 KB */
#define CFG_CS0_CTRL 0x003f0d40
#define CFG_CS1_BASE 0xfe00
#define CFG_CS1_MASK 0x01000000 /* 16 MB */
#define CFG_CS1_CTRL 0x003f1540
#else
#define CFG_CS0_BASE 0xff00
#define CFG_CS0_MASK 0x01000000 /* 16 MB */
#define CFG_CS0_CTRL 0x003f1540
#define CFG_CS1_BASE 0xfe08
#define CFG_CS1_MASK 0x00080000 /* 512 KB */
#define CFG_CS1_CTRL 0x003f0d40
#endif
#define CFG_CS2_BASE 0xf100
#define CFG_CS2_MASK 0x00040000
#define CFG_CS2_CTRL 0x003f1140
#define CFG_CS3_BASE 0xf200
#define CFG_CS3_MASK 0x00040000
#define CFG_CS3_CTRL 0x003f1100
#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16)
#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16)
#if defined (CFG_AMD_BOOT)
#define CFG_AMD_BASE CFG_FLASH0_BASE
#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000
#define CFG_FLASH_BASE CFG_AMD_BASE
#else
#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000
#define CFG_AMD_BASE CFG_FLASH1_BASE
#define CFG_FLASH_BASE CFG_INTEL_BASE
#endif
#define CFG_CPLD_BASE (CFG_CS2_BASE << 16)
#define CFG_FPGA_BASE (CFG_CS3_BASE << 16)
#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
#define CFG_FLASH_CHECKSUM
/*
* Environment settings
*/
#define CFG_ENV_IS_IN_FLASH 1
#if defined (CFG_AMD_BOOT)
#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
#define CFG_ENV_SIZE PHYS_AMD_SECT_SIZE
#define CFG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
#define CFG_ENV1_SIZE PHYS_INTEL_SECT_SIZE
#define CFG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE
#else
#define CFG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
#define CFG_ENV_SIZE PHYS_INTEL_SECT_SIZE
#define CFG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE
#define CFG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
#define CFG_ENV1_SIZE PHYS_AMD_SECT_SIZE
#define CFG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE
#endif
#define CONFIG_ENV_OVERWRITE 1
#if defined CFG_ENV_IS_IN_FLASH
#undef CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_EEPROM
#elif defined CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_FLASH
#undef CFG_ENV_IS_IN_EEPROM
#elif defined CFG_ENV_IS_IN_EEPROM
#undef CFG_ENV_IS_IN_NVRAM
#undef CFG_ENV_IS_IN_FLASH
#endif
#ifndef CFG_JFFS2_FIRST_SECTOR
#define CFG_JFFS2_FIRST_SECTOR 0
#endif
#ifndef CFG_JFFS2_FIRST_BANK
#define CFG_JFFS2_FIRST_BANK 0
#endif
#ifndef CFG_JFFS2_NUM_BANKS
#define CFG_JFFS2_NUM_BANKS 1
#endif
#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
/*
* Memory map
*/
#define CFG_MBAR 0xF0000000
#define CFG_SDRAM_BASE 0x00000000
#define CFG_DEFAULT_MBAR 0x80000000
#define CFG_SRAM_BASE (CFG_MBAR + 0x20000)
#define CFG_SRAM_SIZE 0x8000
/* Use SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000)
#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* SDRAM configuration */
#define CFG_SDRAM_TOTAL_BANKS 2
#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
#define CFG_SDRAM_SPD_SIZE 0x40
#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
/* SDRAM drive strength register */
#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
(DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
(DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
(DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
/*
* Ethernet configuration
*/
#define CONFIG_MPC8220_FEC 1
#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
#define CONFIG_PHY_ADDR 0x18
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
* Various low-level settings
*/
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL HID0_ICE
#endif /* __CONFIG_H */