u-boot/board/adder/adder.c
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00

125 lines
3.6 KiB
C

/*
* Copyright (C) 2004-2005 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
*
* Support for Analogue&Micro Adder boards family.
* Tested on AdderII and Adder87x.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
/*
* SDRAM is single Samsung K4S643232F-T70 chip (8MB)
* or single Micron MT48LC4M32B2TG-7 chip (16MB).
* Minimal CPU frequency is 40MHz.
*/
static uint sdram_table[] = {
/* Single read (offset 0x00 in UPM RAM) */
0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
/* Burst read (offset 0x08 in UPM RAM) */
0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
/* Single write (offset 0x18 in UPM RAM) */
0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* Burst write (offset 0x20 in UPM RAM) */
0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* Refresh (offset 0x30 in UPM RAM) */
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* Exception (offset 0x3C in UPM RAM) */
0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
};
phys_size_t initdram (int board_type)
{
long int msize;
volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
/* Configure SDRAM refresh */
memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
memctl->memc_mamr = (94 << 24) | CONFIG_SYS_MAMR; /* No refresh */
udelay(200);
/* Run precharge from location 0x15 */
memctl->memc_mar = 0x0;
memctl->memc_mcr = 0x80002115;
udelay(200);
/* Run 8 refresh cycles */
memctl->memc_mcr = 0x80002830;
udelay(200);
/* Run MRS pattern from location 0x16 */
memctl->memc_mar = 0x88;
memctl->memc_mcr = 0x80002116;
udelay(200);
memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */
memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
memctl->memc_or1 |= ~(msize - 1);
return msize;
}
int checkboard( void )
{
puts("Board: Adder");
#if defined(CONFIG_MPC885_FAMILY)
puts("87x\n");
#elif defined(CONFIG_MPC866_FAMILY)
puts("II\n");
#endif
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
#endif