This message is printed upon PCIe bus scan, not only upon error, but also if no PCIe device is detected at all. Since this is not an error, let's remove this message in this case. We already have the message "link is not up." if there is no PCIe device present. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
1180 lines
32 KiB
C
1180 lines
32 KiB
C
/*
|
|
* (C) Copyright 2006 - 2008
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Copyright (c) 2005 Cisco Systems. All rights reserved.
|
|
* Roland Dreier <rolandd@cisco.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
/* define DEBUG for debugging output (obviously ;-)) */
|
|
#if 0
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm-ppc/io.h>
|
|
#include <asm/errno.h>
|
|
|
|
#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
|
|
defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
|
|
defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
|
|
|
|
#include <asm/4xx_pcie.h>
|
|
|
|
enum {
|
|
PTYPE_ENDPOINT = 0x0,
|
|
PTYPE_LEGACY_ENDPOINT = 0x1,
|
|
PTYPE_ROOT_PORT = 0x4,
|
|
|
|
LNKW_X1 = 0x1,
|
|
LNKW_X4 = 0x4,
|
|
LNKW_X8 = 0x8
|
|
};
|
|
|
|
static int validate_endpoint(struct pci_controller *hose)
|
|
{
|
|
if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
|
|
return (is_end_point(0));
|
|
else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
|
|
return (is_end_point(1));
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
|
|
return (is_end_point(2));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
|
|
{
|
|
u8 *base = (u8*)hose->cfg_data;
|
|
|
|
/* use local configuration space for the first bus */
|
|
if (PCI_BUS(devfn) == 0) {
|
|
if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
|
|
base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
|
|
if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
|
|
base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
|
|
base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
|
|
#endif
|
|
}
|
|
|
|
return base;
|
|
}
|
|
|
|
static void pcie_dmer_disable(void)
|
|
{
|
|
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
|
|
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
|
|
#endif
|
|
}
|
|
|
|
static void pcie_dmer_enable(void)
|
|
{
|
|
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
|
|
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
|
|
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
|
|
#endif
|
|
}
|
|
|
|
static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
|
|
int offset, int len, u32 *val) {
|
|
|
|
u8 *address;
|
|
*val = 0;
|
|
|
|
if (validate_endpoint(hose))
|
|
return 0; /* No upstream config access */
|
|
|
|
/*
|
|
* Bus numbers are relative to hose->first_busno
|
|
*/
|
|
devfn -= PCI_BDF(hose->first_busno, 0, 0);
|
|
|
|
/*
|
|
* NOTICE: configuration space ranges are currenlty mapped only for
|
|
* the first 16 buses, so such limit must be imposed. In case more
|
|
* buses are required the TLB settings in board/amcc/<board>/init.S
|
|
* need to be altered accordingly (one bus takes 1 MB of memory space).
|
|
*/
|
|
if (PCI_BUS(devfn) >= 16)
|
|
return 0;
|
|
|
|
/*
|
|
* Only single device/single function is supported for the primary and
|
|
* secondary buses of the 440SPe host bridge.
|
|
*/
|
|
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
|
|
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
|
|
return 0;
|
|
|
|
address = pcie_get_base(hose, devfn);
|
|
offset += devfn << 4;
|
|
|
|
/*
|
|
* Reading from configuration space of non-existing device can
|
|
* generate transaction errors. For the read duration we suppress
|
|
* assertion of machine check exceptions to avoid those.
|
|
*/
|
|
pcie_dmer_disable ();
|
|
|
|
debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
|
|
switch (len) {
|
|
case 1:
|
|
*val = in_8(hose->cfg_data + offset);
|
|
break;
|
|
case 2:
|
|
*val = in_le16((u16 *)(hose->cfg_data + offset));
|
|
break;
|
|
default:
|
|
*val = in_le32((u32*)(hose->cfg_data + offset));
|
|
break;
|
|
}
|
|
|
|
pcie_dmer_enable ();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
|
|
int offset, int len, u32 val) {
|
|
|
|
u8 *address;
|
|
|
|
if (validate_endpoint(hose))
|
|
return 0; /* No upstream config access */
|
|
|
|
/*
|
|
* Bus numbers are relative to hose->first_busno
|
|
*/
|
|
devfn -= PCI_BDF(hose->first_busno, 0, 0);
|
|
|
|
/*
|
|
* Same constraints as in pcie_read_config().
|
|
*/
|
|
if (PCI_BUS(devfn) >= 16)
|
|
return 0;
|
|
|
|
if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
|
|
((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
|
|
return 0;
|
|
|
|
address = pcie_get_base(hose, devfn);
|
|
offset += devfn << 4;
|
|
|
|
/*
|
|
* Suppress MCK exceptions, similar to pcie_read_config()
|
|
*/
|
|
pcie_dmer_disable ();
|
|
|
|
switch (len) {
|
|
case 1:
|
|
out_8(hose->cfg_data + offset, val);
|
|
break;
|
|
case 2:
|
|
out_le16((u16 *)(hose->cfg_data + offset), val);
|
|
break;
|
|
default:
|
|
out_le32((u32 *)(hose->cfg_data + offset), val);
|
|
break;
|
|
}
|
|
|
|
pcie_dmer_enable ();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
|
|
{
|
|
u32 v;
|
|
int rv;
|
|
|
|
rv = pcie_read_config(hose, dev, offset, 1, &v);
|
|
*val = (u8)v;
|
|
return rv;
|
|
}
|
|
|
|
int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
|
|
{
|
|
u32 v;
|
|
int rv;
|
|
|
|
rv = pcie_read_config(hose, dev, offset, 2, &v);
|
|
*val = (u16)v;
|
|
return rv;
|
|
}
|
|
|
|
int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
|
|
{
|
|
u32 v;
|
|
int rv;
|
|
|
|
rv = pcie_read_config(hose, dev, offset, 3, &v);
|
|
*val = (u32)v;
|
|
return rv;
|
|
}
|
|
|
|
int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
|
|
{
|
|
return pcie_write_config(hose,(u32)dev,offset,1,val);
|
|
}
|
|
|
|
int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
|
|
{
|
|
return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
|
|
}
|
|
|
|
int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
|
|
{
|
|
return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
|
|
}
|
|
|
|
#if defined(CONFIG_440SPE)
|
|
static void ppc4xx_setup_utl(u32 port) {
|
|
|
|
volatile void *utl_base = NULL;
|
|
|
|
/*
|
|
* Map UTL registers
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
|
|
break;
|
|
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
|
|
break;
|
|
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
|
|
break;
|
|
}
|
|
utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
|
|
|
|
/*
|
|
* Set buffer allocations and then assert VRB and TXE.
|
|
*/
|
|
out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
|
|
out_be32(utl_base + PEUTL_INTR, 0x02000000);
|
|
out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
|
|
out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
|
|
out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
|
|
out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
|
|
out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
|
|
out_be32(utl_base + PEUTL_PCTL, 0x80800066);
|
|
}
|
|
|
|
static int check_error(void)
|
|
{
|
|
u32 valPE0, valPE1, valPE2;
|
|
int err = 0;
|
|
|
|
/* SDR0_PEGPLLLCT1 reset */
|
|
if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
|
|
printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
|
|
|
|
valPE0 = SDR_READ(PESDR0_RCSSET);
|
|
valPE1 = SDR_READ(PESDR1_RCSSET);
|
|
valPE2 = SDR_READ(PESDR2_RCSSET);
|
|
|
|
/* SDR0_PExRCSSET rstgu */
|
|
if (!(valPE0 & 0x01000000) ||
|
|
!(valPE1 & 0x01000000) ||
|
|
!(valPE2 & 0x01000000)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstgu error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstdl */
|
|
if (!(valPE0 & 0x00010000) ||
|
|
!(valPE1 & 0x00010000) ||
|
|
!(valPE2 & 0x00010000)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstdl error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstpyn */
|
|
if ((valPE0 & 0x00001000) ||
|
|
(valPE1 & 0x00001000) ||
|
|
(valPE2 & 0x00001000)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET hldplb */
|
|
if ((valPE0 & 0x10000000) ||
|
|
(valPE1 & 0x10000000) ||
|
|
(valPE2 & 0x10000000)) {
|
|
printf("PCIE: SDR0_PExRCSSET hldplb error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rdy */
|
|
if ((valPE0 & 0x00100000) ||
|
|
(valPE1 & 0x00100000) ||
|
|
(valPE2 & 0x00100000)) {
|
|
printf("PCIE: SDR0_PExRCSSET rdy error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET shutdown */
|
|
if ((valPE0 & 0x00000100) ||
|
|
(valPE1 & 0x00000100) ||
|
|
(valPE2 & 0x00000100)) {
|
|
printf("PCIE: SDR0_PExRCSSET shutdown error\n");
|
|
err = -1;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Initialize PCI Express core
|
|
*/
|
|
int ppc4xx_init_pcie(void)
|
|
{
|
|
int time_out = 20;
|
|
|
|
/* Set PLL clock receiver to LVPECL */
|
|
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
|
|
|
|
if (check_error()) {
|
|
printf("ERROR: failed to set PCIe reference clock receiver --"
|
|
"PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* Did resistance calibration work? */
|
|
if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
|
|
printf("ERROR: PCIe resistance calibration failed --"
|
|
"PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
|
|
|
|
return -1;
|
|
}
|
|
/* De-assert reset of PCIe PLL, wait for lock */
|
|
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
|
|
udelay(300); /* 300 uS is maximum time lock should take */
|
|
|
|
while (time_out) {
|
|
if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
|
|
time_out--;
|
|
udelay(20); /* Wait 20 uS more if needed */
|
|
} else
|
|
break;
|
|
}
|
|
if (!time_out) {
|
|
printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
|
|
"PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
|
|
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
|
|
static void ppc4xx_setup_utl(u32 port)
|
|
{
|
|
volatile void *utl_base = NULL;
|
|
|
|
/*
|
|
* Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
|
|
break;
|
|
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
|
|
+ 0x1000);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
|
|
break;
|
|
}
|
|
utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
|
|
|
|
/*
|
|
* Set buffer allocations and then assert VRB and TXE.
|
|
*/
|
|
out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
|
|
out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
|
|
out_be32(utl_base + PEUTL_INTR, 0x02000000);
|
|
out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
|
|
out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
|
|
out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
|
|
out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
|
|
out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
|
|
out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
|
|
}
|
|
|
|
/*
|
|
* TODO: double check PCI express SDR based on the latest user manual
|
|
* Some registers specified here no longer exist.. has to be
|
|
* updated based on the final EAS spec.
|
|
*/
|
|
static int check_error(void)
|
|
{
|
|
u32 valPE0, valPE1;
|
|
int err = 0;
|
|
|
|
valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
|
|
valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
|
|
|
|
/* SDR0_PExRCSSET rstgu */
|
|
if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstgu error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstdl */
|
|
if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstdl error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rstpyn */
|
|
if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
|
|
printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET hldplb */
|
|
if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
|
|
printf("PCIE: SDR0_PExRCSSET hldplb error\n");
|
|
err = -1;
|
|
}
|
|
|
|
/* SDR0_PExRCSSET rdy */
|
|
if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
|
|
printf("PCIE: SDR0_PExRCSSET rdy error\n");
|
|
err = -1;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Initialize PCI Express core as described in User Manual
|
|
* TODO: double check PE SDR PLL Register with the updated user manual.
|
|
*/
|
|
int ppc4xx_init_pcie(void)
|
|
{
|
|
if (check_error())
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_460EX */
|
|
|
|
#if defined(CONFIG_405EX)
|
|
static void ppc4xx_setup_utl(u32 port)
|
|
{
|
|
u32 utl_base;
|
|
|
|
/*
|
|
* Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
|
|
*/
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
|
|
break;
|
|
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
|
|
mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
|
|
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
|
|
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
|
|
|
|
break;
|
|
}
|
|
utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
|
|
|
|
/*
|
|
* Set buffer allocations and then assert VRB and TXE.
|
|
*/
|
|
out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
|
|
out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
|
|
out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
|
|
|
|
out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
|
|
out_be32((u32 *)(utl_base + PEUTL_RCSTA),
|
|
in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
|
|
}
|
|
|
|
int ppc4xx_init_pcie(void)
|
|
{
|
|
/*
|
|
* Nothing to do on 405EX
|
|
*/
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_405EX */
|
|
|
|
/*
|
|
* Board-specific pcie initialization
|
|
* Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
|
|
*/
|
|
|
|
/*
|
|
* Initialize various parts of the PCI Express core for our port:
|
|
*
|
|
* - Set as a root port and enable max width
|
|
* (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
|
|
* - Set up UTL configuration.
|
|
* - Increase SERDES drive strength to levels suggested by AMCC.
|
|
* - De-assert RSTPYN, RSTDL and RSTGU.
|
|
*
|
|
* NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
|
|
* with default setting 0x11310000. The register has new fields,
|
|
* PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
|
|
* hang.
|
|
*/
|
|
#if defined(CONFIG_440SPE)
|
|
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
|
|
{
|
|
u32 val = 1 << 24;
|
|
u32 utlset1;
|
|
|
|
if (rootport) {
|
|
val = PTYPE_ROOT_PORT << 20;
|
|
utlset1 = 0x21222222;
|
|
} else {
|
|
val = PTYPE_LEGACY_ENDPOINT << 20;
|
|
utlset1 = 0x20222222;
|
|
}
|
|
|
|
if (port == 0)
|
|
val |= LNKW_X8 << 12;
|
|
else
|
|
val |= LNKW_X4 << 12;
|
|
|
|
SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
|
|
SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
|
|
if (!ppc440spe_revB())
|
|
SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
|
|
SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
|
|
SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
|
|
SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
|
|
SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
|
|
if (port == 0) {
|
|
SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
|
|
SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
|
|
}
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
|
|
~(1 << 24 | 1 << 16)) | 1 << 12);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
|
|
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
|
|
{
|
|
u32 val;
|
|
u32 utlset1;
|
|
|
|
if (rootport)
|
|
val = PTYPE_ROOT_PORT << 20;
|
|
else
|
|
val = PTYPE_LEGACY_ENDPOINT << 20;
|
|
|
|
if (port == 0) {
|
|
val |= LNKW_X1 << 12;
|
|
utlset1 = 0x20000000;
|
|
} else {
|
|
val |= LNKW_X4 << 12;
|
|
utlset1 = 0x20101101;
|
|
}
|
|
|
|
SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
|
|
SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
|
|
SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
|
|
SDR_WRITE(PESDR0_L0DRV, 0x00000130);
|
|
SDR_WRITE(PESDR0_L0CLK, 0x00000006);
|
|
|
|
SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
|
|
break;
|
|
|
|
case 1:
|
|
SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
|
|
SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
|
|
SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
|
|
SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
|
|
SDR_WRITE(PESDR1_L0DRV, 0x00000130);
|
|
SDR_WRITE(PESDR1_L1DRV, 0x00000130);
|
|
SDR_WRITE(PESDR1_L2DRV, 0x00000130);
|
|
SDR_WRITE(PESDR1_L3DRV, 0x00000130);
|
|
SDR_WRITE(PESDR1_L0CLK, 0x00000006);
|
|
SDR_WRITE(PESDR1_L1CLK, 0x00000006);
|
|
SDR_WRITE(PESDR1_L2CLK, 0x00000006);
|
|
SDR_WRITE(PESDR1_L3CLK, 0x00000006);
|
|
|
|
SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
|
|
break;
|
|
}
|
|
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
|
|
(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
|
|
|
|
/* Poll for PHY reset */
|
|
switch (port) {
|
|
case 0:
|
|
while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
|
|
udelay(10);
|
|
break;
|
|
case 1:
|
|
while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
|
|
udelay(10);
|
|
break;
|
|
}
|
|
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port),
|
|
(SDR_READ(SDRN_PESDR_RCSSET(port)) &
|
|
~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
|
|
PESDRx_RCSSET_RSTPYN);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
#if defined(CONFIG_405EX)
|
|
int __ppc4xx_init_pcie_port_hw(int port, int rootport)
|
|
{
|
|
u32 val;
|
|
|
|
if (rootport)
|
|
val = 0x00401000;
|
|
else
|
|
val = 0x00101000;
|
|
|
|
SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
|
|
SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
|
|
SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
|
|
SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
|
|
SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
|
|
|
|
/* Assert the PE0_PHY reset */
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
|
|
udelay(1000);
|
|
|
|
/* deassert the PE0_hotreset */
|
|
if (is_end_point(port))
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
|
|
else
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
|
|
|
|
/* poll for phy !reset */
|
|
while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
|
|
;
|
|
|
|
/* deassert the PE0_gpl_utl_reset */
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
|
|
|
|
if (port == 0)
|
|
mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
|
|
else
|
|
mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_405EX */
|
|
|
|
int ppc4xx_init_pcie_port_hw(int port, int rootport)
|
|
__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
|
|
|
|
/*
|
|
* We map PCI Express configuration access into the 512MB regions
|
|
*
|
|
* NOTICE: revB is very strict about PLB real addressess and ranges to
|
|
* be mapped for config space; it seems to only work with d_nnnn_nnnn
|
|
* range (hangs the core upon config transaction attempts when set
|
|
* otherwise) while revA uses c_nnnn_nnnn.
|
|
*
|
|
* For 440SPe revA:
|
|
* PCIE0: 0xc_4000_0000
|
|
* PCIE1: 0xc_8000_0000
|
|
* PCIE2: 0xc_c000_0000
|
|
*
|
|
* For 440SPe revB:
|
|
* PCIE0: 0xd_0000_0000
|
|
* PCIE1: 0xd_2000_0000
|
|
* PCIE2: 0xd_4000_0000
|
|
*
|
|
* For 405EX:
|
|
* PCIE0: 0xa000_0000
|
|
* PCIE1: 0xc000_0000
|
|
*
|
|
* For 460EX/GT:
|
|
* PCIE0: 0xd_0000_0000
|
|
* PCIE1: 0xd_2000_0000
|
|
*/
|
|
static inline u64 ppc4xx_get_cfgaddr(int port)
|
|
{
|
|
#if defined(CONFIG_405EX)
|
|
if (port == 0)
|
|
return (u64)CONFIG_SYS_PCIE0_CFGBASE;
|
|
else
|
|
return (u64)CONFIG_SYS_PCIE1_CFGBASE;
|
|
#endif
|
|
#if defined(CONFIG_440SPE)
|
|
if (ppc440spe_revB()) {
|
|
switch (port) {
|
|
default: /* to satisfy compiler */
|
|
case 0:
|
|
return 0x0000000d00000000ULL;
|
|
case 1:
|
|
return 0x0000000d20000000ULL;
|
|
case 2:
|
|
return 0x0000000d40000000ULL;
|
|
}
|
|
} else {
|
|
switch (port) {
|
|
default: /* to satisfy compiler */
|
|
case 0:
|
|
return 0x0000000c40000000ULL;
|
|
case 1:
|
|
return 0x0000000c80000000ULL;
|
|
case 2:
|
|
return 0x0000000cc0000000ULL;
|
|
}
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
|
|
if (port == 0)
|
|
return 0x0000000d00000000ULL;
|
|
else
|
|
return 0x0000000d20000000ULL;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* 4xx boards as end point and root point setup
|
|
* and
|
|
* testing inbound and out bound windows
|
|
*
|
|
* 4xx boards can be plugged into another 4xx boards or you can get PCI-E
|
|
* cable which can be used to setup loop back from one port to another port.
|
|
* Please rememeber that unless there is a endpoint plugged in to root port it
|
|
* will not initialize. It is the same in case of endpoint , unless there is
|
|
* root port attached it will not initialize.
|
|
*
|
|
* In this release of software all the PCI-E ports are configured as either
|
|
* endpoint or rootpoint.In future we will have support for selective ports
|
|
* setup as endpoint and root point in single board.
|
|
*
|
|
* Once your board came up as root point , you can verify by reading
|
|
* /proc/bus/pci/devices. Where you can see the configuration registers
|
|
* of end point device attached to the port.
|
|
*
|
|
* Enpoint cofiguration can be verified by connecting 4xx board to any
|
|
* host or another 4xx board. Then try to scan the device. In case of
|
|
* linux use "lspci" or appripriate os command.
|
|
*
|
|
* How do I verify the inbound and out bound windows ? (4xx to 4xx)
|
|
* in this configuration inbound and outbound windows are setup to access
|
|
* sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
|
|
* is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
|
|
* This is waere your POM(PLB out bound memory window) mapped. then
|
|
* read the data from other 4xx board's u-boot prompt at address
|
|
* 0x9000 0000(SRAM). Data should match.
|
|
* In case of inbound , write data to u-boot command prompt at 0xb000 0000
|
|
* which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
|
|
* data at 0x9000 0000(SRAM).Data should match.
|
|
*/
|
|
int ppc4xx_init_pcie_port(int port, int rootport)
|
|
{
|
|
static int core_init;
|
|
volatile u32 val = 0;
|
|
int attempts;
|
|
u64 addr;
|
|
u32 low, high;
|
|
|
|
if (!core_init) {
|
|
if (ppc4xx_init_pcie())
|
|
return -1;
|
|
++core_init;
|
|
}
|
|
|
|
/*
|
|
* Initialize various parts of the PCI Express core for our port
|
|
*/
|
|
ppc4xx_init_pcie_port_hw(port, rootport);
|
|
|
|
/*
|
|
* Notice: the following delay has critical impact on device
|
|
* initialization - if too short (<50ms) the link doesn't get up.
|
|
*/
|
|
mdelay(100);
|
|
|
|
val = SDR_READ(SDRN_PESDR_RCSSTS(port));
|
|
if (val & (1 << 20)) {
|
|
printf("PCIE%d: PGRST failed %08x\n", port, val);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Verify link is up
|
|
*/
|
|
val = SDR_READ(SDRN_PESDR_LOOP(port));
|
|
if (!(val & 0x00001000)) {
|
|
printf("PCIE%d: link is not up.\n", port);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Setup UTL registers - but only on revA!
|
|
* We use default settings for revB chip.
|
|
*/
|
|
if (!ppc440spe_revB())
|
|
ppc4xx_setup_utl(port);
|
|
|
|
/*
|
|
* We map PCI Express configuration access into the 512MB regions
|
|
*/
|
|
addr = ppc4xx_get_cfgaddr(port);
|
|
low = U64_TO_U32_LOW(addr);
|
|
high = U64_TO_U32_HIGH(addr);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
|
|
mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
|
|
mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Check for VC0 active and assert RDY.
|
|
*/
|
|
attempts = 10;
|
|
while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
|
|
if (!(attempts--)) {
|
|
printf("PCIE%d: VC0 not active\n", port);
|
|
return -1;
|
|
}
|
|
mdelay(1000);
|
|
}
|
|
SDR_WRITE(SDRN_PESDR_RCSSET(port),
|
|
SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
|
|
mdelay(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ppc4xx_init_pcie_rootport(int port)
|
|
{
|
|
return ppc4xx_init_pcie_port(port, 1);
|
|
}
|
|
|
|
int ppc4xx_init_pcie_endport(int port)
|
|
{
|
|
return ppc4xx_init_pcie_port(port, 0);
|
|
}
|
|
|
|
void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
|
|
{
|
|
volatile void *mbase = NULL;
|
|
volatile void *rmbase = NULL;
|
|
|
|
pci_set_ops(hose,
|
|
pcie_read_config_byte,
|
|
pcie_read_config_word,
|
|
pcie_read_config_dword,
|
|
pcie_write_config_byte,
|
|
pcie_write_config_word,
|
|
pcie_write_config_dword);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
|
|
rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
|
|
break;
|
|
case 1:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
|
|
rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
|
|
break;
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
case 2:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
|
|
rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Set bus numbers on our root port
|
|
*/
|
|
out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
|
|
out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
|
|
out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
|
|
|
|
/*
|
|
* Set up outbound translation to hose->mem_space from PLB
|
|
* addresses at an offset of 0xd_0000_0000. We set the low
|
|
* bits of the mask to 11 to turn off splitting into 8
|
|
* subregions and to enable the outbound translation.
|
|
*/
|
|
out_le32(mbase + PECFG_POM0LAH, 0x00000000);
|
|
out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
|
|
in_le32(mbase + PECFG_POM0LAL));
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
|
|
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
|
|
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
|
|
break;
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
|
|
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
|
|
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
|
|
break;
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
|
|
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
|
|
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
|
|
mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
/* Set up 4GB inbound memory window at 0 */
|
|
out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
|
|
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
|
|
out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
|
|
out_le32(mbase + PECFG_BAR0LMPA, 0);
|
|
|
|
out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
|
|
out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
|
|
out_le32(mbase + PECFG_PIM0LAL, 0);
|
|
out_le32(mbase + PECFG_PIM0LAH, 0);
|
|
out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
|
|
out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
|
|
out_le32(mbase + PECFG_PIMEN, 0x1);
|
|
|
|
/* Enable I/O, Mem, and Busmaster cycles */
|
|
out_le16((u16 *)(mbase + PCI_COMMAND),
|
|
in_le16((u16 *)(mbase + PCI_COMMAND)) |
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
|
|
/* Set Device and Vendor Id */
|
|
out_le16(mbase + 0x200, 0xaaa0 + port);
|
|
out_le16(mbase + 0x202, 0xbed0 + port);
|
|
|
|
/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
|
|
out_le32(mbase + 0x208, 0x06040001);
|
|
|
|
printf("PCIE%d: successfully set as root-complex\n", port);
|
|
}
|
|
|
|
int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
|
|
{
|
|
volatile void *mbase = NULL;
|
|
int attempts = 0;
|
|
|
|
pci_set_ops(hose,
|
|
pcie_read_config_byte,
|
|
pcie_read_config_word,
|
|
pcie_read_config_dword,
|
|
pcie_write_config_byte,
|
|
pcie_write_config_word,
|
|
pcie_write_config_dword);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
|
|
break;
|
|
case 1:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
|
|
break;
|
|
#if defined(CONFIG_SYS_PCIE2_CFGBASE)
|
|
case 2:
|
|
mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
|
|
hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Set up outbound translation to hose->mem_space from PLB
|
|
* addresses at an offset of 0xd_0000_0000. We set the low
|
|
* bits of the mask to 11 to turn off splitting into 8
|
|
* subregions and to enable the outbound translation.
|
|
*/
|
|
out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
|
|
out_le32(mbase + PECFG_POM0LAL, 0x00001000);
|
|
|
|
switch (port) {
|
|
case 0:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
break;
|
|
case 1:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
break;
|
|
#if CONFIG_SYS_PCIE_NR_PORTS > 2
|
|
case 2:
|
|
mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
|
|
mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
|
|
port * CONFIG_SYS_PCIE_MEMSIZE);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
|
|
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
|
|
~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
/* Set up 64MB inbound memory window at 0 */
|
|
out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
|
|
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
|
|
|
|
out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
|
|
out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
|
|
|
|
/* Setup BAR0 */
|
|
out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
|
|
out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
|
|
|
|
/* Disable BAR1 & BAR2 */
|
|
out_le32(mbase + PECFG_BAR1MPA, 0);
|
|
out_le32(mbase + PECFG_BAR2HMPA, 0);
|
|
out_le32(mbase + PECFG_BAR2LMPA, 0);
|
|
|
|
out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
|
|
out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
|
|
out_le32(mbase + PECFG_PIMEN, 0x1);
|
|
|
|
/* Enable I/O, Mem, and Busmaster cycles */
|
|
out_le16((u16 *)(mbase + PCI_COMMAND),
|
|
in_le16((u16 *)(mbase + PCI_COMMAND)) |
|
|
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
|
|
out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
|
|
out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
|
|
|
|
/* Set Class Code to Processor/PPC */
|
|
out_le32(mbase + 0x208, 0x0b200001);
|
|
|
|
attempts = 10;
|
|
while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
|
|
if (!(attempts--)) {
|
|
printf("PCIE%d: BME not active\n", port);
|
|
return -1;
|
|
}
|
|
mdelay(1000);
|
|
}
|
|
|
|
printf("PCIE%d: successfully set as endpoint\n", port);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_440SPE && CONFIG_PCI */
|