u-boot/drivers/mmc
Ilya Yanok b86b85e261 mmc: set bus width to 1 and clock to minimum early during initialization
We need to switch back to 1-bit before initialization or SD 2.0 cards
will fail to send SCR if we've switched to 4-bit already.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-07-19 22:07:29 +02:00
..
atmel_mci.c Convert mmc_init to mmc_legacy_init 2009-02-16 18:07:40 -06:00
atmel_mci.h mmc: Move atmel_mci driver into drivers/mmc 2008-07-10 00:05:52 +02:00
bfin_sdh.c Blackfin: convert bfin_sdh to legacy mmc 2009-04-02 06:42:05 -04:00
bfin_sdh.h Blackfin: add driver for on-chip MMC/SD controller 2009-02-02 12:27:18 -05:00
fsl_esdhc.c fsl_esdhc: Add device tree fixups 2009-07-16 22:24:06 +02:00
Makefile pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00
mmc.c mmc: set bus width to 1 and clock to minimum early during initialization 2009-07-19 22:07:29 +02:00
omap3_mmc.c OMAP3: Clean up MMC code 2009-02-22 18:29:10 +01:00
pxa_mmc.c ARM:PXA Use new definitions in mmc.h 2009-02-20 03:47:50 +01:00
pxa_mmc.h pxa: move mmc drivers to drivers/mmc 2009-02-20 03:47:50 +01:00