u-boot/board/kosagi/novena/novena.c
Marek Vasut 331ae846ad arm: mx6: novena: Add proper LVDS display support
Repair the register configuration and add proper support for the
display attached to both LVDS channels.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Sean Cross <xobs@kosagi.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
2014-12-30 14:10:31 +01:00

270 lines
5.1 KiB
C

/*
* Novena board support
*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/sata.h>
#include <asm/imx-common/video.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
#include <ipu_pixfmt.h>
#include <linux/fb.h>
#include <linux/input.h>
#include <malloc.h>
#include <micrel.h>
#include <miiphy.h>
#include <mmc.h>
#include <netdev.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <stdio_dev.h>
#include "novena.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* GPIO button
*/
#ifdef CONFIG_KEYBOARD
static struct input_config button_input;
static int novena_gpio_button_read_keys(struct input_config *input)
{
int key = KEY_ENTER;
if (gpio_get_value(NOVENA_BUTTON_GPIO))
return 0;
input_send_keycodes(&button_input, &key, 1);
return 1;
}
static int novena_gpio_button_getc(struct stdio_dev *dev)
{
return input_getc(&button_input);
}
static int novena_gpio_button_tstc(struct stdio_dev *dev)
{
return input_tstc(&button_input);
}
static int novena_gpio_button_init(struct stdio_dev *dev)
{
gpio_direction_input(NOVENA_BUTTON_GPIO);
input_set_delays(&button_input, 250, 250);
return 0;
}
int drv_keyboard_init(void)
{
int error;
struct stdio_dev dev = {
.name = "button",
.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM,
.start = novena_gpio_button_init,
.getc = novena_gpio_button_getc,
.tstc = novena_gpio_button_tstc,
};
error = input_init(&button_input, 0);
if (error) {
debug("%s: Cannot set up input\n", __func__);
return -1;
}
button_input.read_keys = novena_gpio_button_read_keys;
error = input_stdio_register(&dev);
if (error)
return error;
return 0;
}
#endif
/*
* SDHC
*/
#ifdef CONFIG_FSL_ESDHC
static struct fsl_esdhc_cfg usdhc_cfg[] = {
{ USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */
{ USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */
};
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
/* There is no CD for a microSD card, assume always present. */
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
return 1;
else
return !gpio_get_value(NOVENA_SD_CD);
}
int board_mmc_getwp(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
/* There is no WP for a microSD card, assume always read-write. */
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
return 0;
else
return gpio_get_value(NOVENA_SD_WP);
}
int board_mmc_init(bd_t *bis)
{
s32 status = 0;
int index;
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
/* Big SD write-protect and card-detect */
gpio_direction_input(NOVENA_SD_WP);
gpio_direction_input(NOVENA_SD_CD);
for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) {
status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
if (status)
return status;
}
return status;
}
#endif
int board_early_init_f(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
setup_display_clock();
#endif
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
#ifdef CONFIG_CMD_SATA
setup_sata();
#endif
return 0;
}
int board_late_init(void)
{
#if defined(CONFIG_VIDEO_IPUV3)
setup_display_lvds();
#endif
return 0;
}
int checkboard(void)
{
puts("Board: Novena 4x\n");
return 0;
}
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
return 0;
}
/* setup board specific PMIC */
int power_init_board(void)
{
struct pmic *p;
u32 reg;
int ret;
power_pfuze100_init(1);
p = pmic_get("PFUZE100");
if (!p)
return -EINVAL;
ret = pmic_probe(p);
if (ret)
return ret;
pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
/* Set SWBST to 5.0V and enable (for USB) */
pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
return 0;
}
/* EEPROM configuration data */
struct novena_eeprom_data {
uint8_t signature[6];
uint8_t version;
uint8_t reserved;
uint32_t serial;
uint8_t mac[6];
uint16_t features;
};
int misc_init_r(void)
{
struct novena_eeprom_data data;
uchar *datap = (uchar *)&data;
const char *signature = "Novena";
int ret;
/* If 'ethaddr' is already set, do nothing. */
if (getenv("ethaddr"))
return 0;
/* EEPROM is at bus 2. */
ret = i2c_set_bus_num(2);
if (ret) {
puts("Cannot select EEPROM I2C bus.\n");
return 0;
}
/* EEPROM is at address 0x56. */
ret = eeprom_read(0x56, 0, datap, sizeof(data));
if (ret) {
puts("Cannot read I2C EEPROM.\n");
return 0;
}
/* Check EEPROM signature. */
if (memcmp(data.signature, signature, 6)) {
puts("Invalid I2C EEPROM signature.\n");
return 0;
}
/* Set ethernet address from EEPROM. */
eth_setenv_enetaddr("ethaddr", data.mac);
return ret;
}