u-boot/board/ms7750se/lowlevel_init.S
Rob Herring 7682a99826 remove unnecessary version.h includes
Various files are needlessly rebuilt every time due to the version and
build time changing. As version.h is not actually needed, remove the
include.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Macpaul Lin <macpaul@andestech.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: "David Müller" <d.mueller@elsoft.ch>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Torsten Koschorrek <koschorrek@synertronixx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-03-24 10:50:50 -04:00

143 lines
3.7 KiB
ArmAsm

/*
modified from SH-IPL+g
Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting.
Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R
Coyright (c) 2007 Nobuhiro Iwamatsu <iwmatsu@nigauri.org>
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/processor.h>
#include <asm/macro.h>
#ifdef CONFIG_CPU_SH7751
#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */
#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */
#ifdef CONFIG_MARUBUN_PCCARD
#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15
A3:2 A2:15 A1:15 A0:6 A0B:7 */
#else /* CONFIG_MARUBUN_PCCARD */
#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15
A3:2 A2:15 A1:15 A0:6 A0B:7 */
#endif /* CONFIG_MARUBUN_PCCARD */
#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3
A2: 1-3 A1: 1-3 A0: 0-1 */
#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */
#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */
#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, .. */
#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */
#else /* CONFIG_CPU_SH7751 */
#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */
#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */
#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15
A3:2 A2:15 A1:15 A0:15 A0B:7 */
#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3
A2: 1-3 A1: 1-3 A0: 0-1 */
#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */
#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */
#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, .. */
#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */
#endif /* CONFIG_CPU_SH7751 */
.global lowlevel_init
.text
.align 2
lowlevel_init:
write32 CCR_A, CCR_D_DISABLE
init_bsc:
write16 FRQCR_A, FRQCR_D
write32 BCR1_A, BCR1_D
write16 BCR2_A, BCR2_D
write32 WCR1_A, WCR1_D
write32 WCR2_A, WCR2_D
write32 WCR3_A, WCR3_D
write32 MCR_A, MCR_D1
/* Set SDRAM mode */
write8 SDMR3_A, SDMR3_D
! Do you need PCMCIA setting?
! If so, please add the lines here...
write16 RTCNT_A, RTCNT_D
write16 RTCOR_A, RTCOR_D
write16 RTCSR_A, RTCSR_D
write16 RFCR_A, RFCR_D
/* Wait DRAM refresh 30 times */
mov #30, r3
1:
mov.w @r1, r0
extu.w r0, r2
cmp/hi r3, r2
bf 1b
write32 MCR_A, MCR_D2
/* Set SDRAM mode */
write8 SDMR3_A, SDMR3_D
rts
nop
.align 2
CCR_A: .long CCR
CCR_D_DISABLE: .long 0x0808
FRQCR_A: .long FRQCR
FRQCR_D:
#ifdef CONFIG_CPU_TYPE_R
.word 0x0e1a /* 12:3:3 */
#else /* CONFIG_CPU_TYPE_R */
#ifdef CONFIG_GOOD_SESH4
.word 0x00e13 /* 6:2:1 */
#else
.word 0x00e23 /* 6:1:1 */
#endif
.align 2
#endif /* CONFIG_CPU_TYPE_R */
BCR1_A: .long BCR1
BCR1_D: .long 0x00000008 /* Area 3 SDRAM */
BCR2_A: .long BCR2
BCR2_D: .long BCR2_D_VALUE /* Bus width settings */
WCR1_A: .long WCR1
WCR1_D: .long WCR1_D_VALUE /* Inter-area or turnaround wait states */
WCR2_A: .long WCR2
WCR2_D: .long WCR2_D_VALUE /* Per-area access and burst wait states */
WCR3_A: .long WCR3
WCR3_D: .long WCR3_D_VALUE /* Address setup and data hold cycles */
RTCSR_A: .long RTCSR
RTCSR_D: .word 0xA518 /* RTCSR Write Code A5h Data 18h */
.align 2
RTCNT_A: .long RTCNT
RTCNT_D: .word 0xA500 /* RTCNT Write Code A5h Data 00h */
.align 2
RTCOR_A: .long RTCOR
RTCOR_D: .word RTCOR_D_VALUE /* Set refresh time (about 15us) */
.align 2
SDMR3_A: .long SDMR3_ADDRESS
SDMR3_D: .long 0x00
MCR_A: .long MCR
MCR_D1: .long MCR_D1_VALUE
MCR_D2: .long MCR_D2_VALUE
RFCR_A: .long RFCR
RFCR_D: .word 0xA400 /* RFCR Write Code A4h Data 00h */
.align 2