u-boot/common/iotrace.c
Simon Glass aa53233a15 Add an I/O tracing feature
When debugging drivers it is useful to see what I/O accesses were done
and in what order.

Even if the individual accesses are of little interest it can be useful to
verify that the access pattern is consistent each time an operation is
performed. In this case a checksum can be used to characterise the operation
of a driver. The checksum can be compared across different runs of the
operation to verify that the driver is working properly.

In particular, when performing major refactoring of the driver, where the
access pattern should not change, the checksum provides assurance that the
refactoring work has not broken the driver.

Add an I/O tracing feature and associated commands to provide this facility.
It works by sneaking into the io.h heder for an architecture and redirecting
I/O accesses through its tracing mechanism.

For now no commands are provided to examine the trace buffer. The format is
fairly simple, so 'md' is a reasonable substitute.

Note: The checksum feature is only useful for I/O regions where the contents
do not change outside of software control. Where this is not suitable you can
fall back to manually comparing the addresses. It might be useful to enhance
tracing to only checksum the accesses and not the data read/written.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:54:29 -06:00

170 lines
3.2 KiB
C

/*
* Copyright (c) 2014 Google, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#define IOTRACE_IMPL
#include <common.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
/* Support up to the machine word length for now */
typedef ulong iovalue_t;
enum iotrace_flags {
IOT_8 = 0,
IOT_16,
IOT_32,
IOT_READ = 0 << 3,
IOT_WRITE = 1 << 3,
};
/**
* struct iotrace_record - Holds a single I/O trace record
*
* @flags: I/O access type
* @addr: Address of access
* @value: Value written or read
*/
struct iotrace_record {
enum iotrace_flags flags;
phys_addr_t addr;
iovalue_t value;
};
/**
* struct iotrace - current trace status and checksum
*
* @start: Start address of iotrace buffer
* @size: Size of iotrace buffer in bytes
* @offset: Current write offset into iotrace buffer
* @crc32: Current value of CRC chceksum of trace records
* @enabled: true if enabled, false if disabled
*/
static struct iotrace {
ulong start;
ulong size;
ulong offset;
u32 crc32;
bool enabled;
} iotrace;
static void add_record(int flags, const void *ptr, ulong value)
{
struct iotrace_record srec, *rec = &srec;
/*
* We don't support iotrace before relocation. Since the trace buffer
* is set up by a command, it can't be enabled at present. To change
* this we would need to set the iotrace buffer at build-time. See
* lib/trace.c for how this might be done if you are interested.
*/
if (!(gd->flags & GD_FLG_RELOC) || !iotrace.enabled)
return;
/* Store it if there is room */
if (iotrace.offset + sizeof(*rec) < iotrace.size) {
rec = (struct iotrace_record *)map_sysmem(
iotrace.start + iotrace.offset,
sizeof(value));
}
rec->flags = flags;
rec->addr = map_to_sysmem(ptr);
rec->value = value;
/* Update our checksum */
iotrace.crc32 = crc32(iotrace.crc32, (unsigned char *)rec,
sizeof(*rec));
iotrace.offset += sizeof(struct iotrace_record);
}
u32 iotrace_readl(const void *ptr)
{
u32 v;
v = readl(ptr);
add_record(IOT_32 | IOT_READ, ptr, v);
return v;
}
void iotrace_writel(ulong value, const void *ptr)
{
add_record(IOT_32 | IOT_WRITE, ptr, value);
writel(value, ptr);
}
u16 iotrace_readw(const void *ptr)
{
u32 v;
v = readw(ptr);
add_record(IOT_16 | IOT_READ, ptr, v);
return v;
}
void iotrace_writew(ulong value, const void *ptr)
{
add_record(IOT_16 | IOT_WRITE, ptr, value);
writew(value, ptr);
}
u8 iotrace_readb(const void *ptr)
{
u32 v;
v = readb(ptr);
add_record(IOT_8 | IOT_READ, ptr, v);
return v;
}
void iotrace_writeb(ulong value, const void *ptr)
{
add_record(IOT_8 | IOT_WRITE, ptr, value);
writeb(value, ptr);
}
void iotrace_reset_checksum(void)
{
iotrace.crc32 = 0;
}
u32 iotrace_get_checksum(void)
{
return iotrace.crc32;
}
void iotrace_set_enabled(int enable)
{
iotrace.enabled = enable;
}
int iotrace_get_enabled(void)
{
return iotrace.enabled;
}
void iotrace_set_buffer(ulong start, ulong size)
{
iotrace.start = start;
iotrace.size = size;
iotrace.offset = 0;
iotrace.crc32 = 0;
}
void iotrace_get_buffer(ulong *start, ulong *size, ulong *offset, ulong *count)
{
*start = iotrace.start;
*size = iotrace.size;
*offset = iotrace.offset;
*count = iotrace.offset / sizeof(struct iotrace_record);
}