u-boot/include/dm/uclass-id.h
Thomas Chou d85879938d dm: implement a MTD uclass
Implement a Memory Technology Device (MTD) uclass. It should
include most flash drivers in the future. Though no uclass ops
are defined yet, the MTD ops could be used.

The NAND flash driver is based on MTD. The CFI flash and SPI
flash support MTD, too. It should make sense to convert them
to MTD uclass.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-12 08:26:58 +08:00

75 lines
2.5 KiB
C

/*
* Copyright (c) 2013 Google, Inc
*
* (C) Copyright 2012
* Pavel Herrmann <morpheus.ibis@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _DM_UCLASS_ID_H
#define _DM_UCLASS_ID_H
/* TODO(sjg@chromium.org): this could be compile-time generated */
enum uclass_id {
/* These are used internally by driver model */
UCLASS_ROOT = 0,
UCLASS_DEMO,
UCLASS_TEST,
UCLASS_TEST_FDT,
UCLASS_TEST_BUS,
UCLASS_SPI_EMUL, /* sandbox SPI device emulator */
UCLASS_I2C_EMUL, /* sandbox I2C device emulator */
UCLASS_PCI_EMUL, /* sandbox PCI device emulator */
UCLASS_USB_EMUL, /* sandbox USB bus device emulator */
UCLASS_SIMPLE_BUS, /* bus with child devices */
/* U-Boot uclasses start here - in alphabetical order */
UCLASS_ADC, /* Analog-to-digital converter */
UCLASS_CLK, /* Clock source, e.g. used by peripherals */
UCLASS_CPU, /* CPU, typically part of an SoC */
UCLASS_CROS_EC, /* Chrome OS EC */
UCLASS_DISPLAY_PORT, /* Display port video */
UCLASS_RAM, /* RAM controller */
UCLASS_ETH, /* Ethernet device */
UCLASS_GPIO, /* Bank of general-purpose I/O pins */
UCLASS_I2C, /* I2C bus */
UCLASS_I2C_EEPROM, /* I2C EEPROM device */
UCLASS_I2C_GENERIC, /* Generic I2C device */
UCLASS_I2C_MUX, /* I2C multiplexer */
UCLASS_LED, /* Light-emitting diode (LED) */
UCLASS_LPC, /* x86 'low pin count' interface */
UCLASS_MASS_STORAGE, /* Mass storage device */
UCLASS_MISC, /* Miscellaneous device */
UCLASS_MMC, /* SD / MMC card or chip */
UCLASS_MOD_EXP, /* RSA Mod Exp device */
UCLASS_MTD, /* Memory Technology Device (MTD) device */
UCLASS_PCH, /* x86 platform controller hub */
UCLASS_PCI, /* PCI bus */
UCLASS_PCI_GENERIC, /* Generic PCI bus device */
UCLASS_PINCTRL, /* Pinctrl (pin muxing/configuration) device */
UCLASS_PINCONFIG, /* Pin configuration node device */
UCLASS_PMIC, /* PMIC I/O device */
UCLASS_REGULATOR, /* Regulator device */
UCLASS_RESET, /* Reset device */
UCLASS_REMOTEPROC, /* Remote Processor device */
UCLASS_RTC, /* Real time clock device */
UCLASS_SERIAL, /* Serial UART */
UCLASS_SPI, /* SPI bus */
UCLASS_SPI_FLASH, /* SPI flash */
UCLASS_SPI_GENERIC, /* Generic SPI flash target */
UCLASS_SYSCON, /* System configuration device */
UCLASS_THERMAL, /* Thermal sensor */
UCLASS_TIMER, /* Timer device */
UCLASS_TPM, /* Trusted Platform Module TIS interface */
UCLASS_USB, /* USB bus */
UCLASS_USB_DEV_GENERIC, /* USB generic device */
UCLASS_USB_HUB, /* USB hub */
UCLASS_VIDEO_BRIDGE, /* Video bridge, e.g. DisplayPort to LVDS */
UCLASS_COUNT,
UCLASS_INVALID = -1,
};
#endif