Fabio Estevam 768a059710 mx53loco: Turn on VUSB regulator ... On the mx53loco board with mc34708 PMIC it is necessary to turn on VUSB regulator so that the mx53 USBH1 PHY receives the 3.3V voltage. Tested by inserting a USB pen drive in the upper USB slot (USBH1) and then issued the commands: usb start usb info ,which correctly detected and printed the USB pen drive information. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>		2012-05-15 08:31:34 +02:00
..
common	powerpc/corenet_ds: Slave uploads ucode when boot from SRIO	2012-04-24 23:58:33 -05:00
corenet_ds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
m547xevb
m548xevb
m5208evbe
m5235evb
m5249evb
m5253demo
m5253evbe
m5271evb
m5272c3
m5275evb
m5282evb
m5329evb
m5373evb
m52277evb
m53017evb
m54451evb
m54455evb
mpc832xemds
mpc837xemds
mpc837xerdb
mpc5121ads
mpc7448hpc2
mpc8260ads
mpc8266ads
mpc8308rdb
mpc8313erdb	mpc8313erdb: Enable GPIO support on the MPC8313E RDB	2012-01-09 20:10:33 -06:00
mpc8315erdb
mpc8323erdb
mpc8349emds
mpc8349itx
mpc8360emds
mpc8360erdk
mpc8536ds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
mpc8540ads
mpc8541cds	MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC	2012-01-11 13:57:56 -06:00
mpc8544ds	net: phy: make board_phy_config responsible for calling drv->config	2012-02-27 21:19:25 +01:00
mpc8548cds
mpc8555cds	MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC	2012-01-11 13:57:56 -06:00
mpc8560ads
mpc8568mds
mpc8569mds
mpc8572ds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
mpc8610hpcd
mpc8641hpcn	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
mx6qarm2	i.MX6: arm2: Add AXI cache and Qos setting	2012-04-17 15:41:22 +02:00
mx6qsabrelite	i.MX6: mx6q_sabrelite: add SATA bindings	2012-05-15 08:31:33 +02:00
mx25pdk
mx28evk	mx28evk: add NAND support	2012-05-15 08:31:33 +02:00
mx31ads
mx31pdk	MX31: mx31pdk: drop enable_caches from board file	2012-04-16 14:53:59 +02:00
mx35pdk	MX35: mx35pdk: wrong board revision	2012-04-16 14:53:59 +02:00
mx51evk	mx51evk: Use gpio_direction_input prior to gpio_get_value	2012-02-27 21:19:24 +01:00
mx53ard	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	2012-04-16 14:53:58 +02:00
mx53evk	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	2012-04-16 14:53:58 +02:00
mx53loco	mx53loco: Turn on VUSB regulator	2012-05-15 08:31:34 +02:00
mx53smd	MX53: DDR: Fix ZQHWCTRL field TZQ_CS	2012-04-16 14:53:58 +02:00
p1_p2_rdb	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p1_p2_rdb_pc	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p1010rdb	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p1022ds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p1023rds	powerpc/p1023rds: Disable nor flash node and enable nand flash node	2012-04-24 23:58:30 -05:00
p2020come
p2020ds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p2041rdb	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00
p3060qds	powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot	2012-04-24 23:58:34 -05:00