sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/drivers/usb/host
History
Stefan Roese 2bf352f0c1 usb: dwc2: Add delay to fix the USB detection problem on SoCFPGA 
With patch c998da0d (usb: Change power-on / scanning timeout handling),
the USB scanning is started earlier and with a smaller timeout. This
resulted on SoCFPGA (using the DWC2 driver) in some USB sticks not
getting detected any more. This patch now adds a 1 second delay (in
the host mode only) to the DWC2 driver before the scanning is started.
With this delay, now all problematic USB keys are detected successfully
again. And there is no need any more to change the delay / timeout
in the common USB code (usb_hub.c).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Marek Vasut <marex@denx.de>
 		2016-05-06 20:06:56 +02:00
..
Kconfig ehci: Add support for Qualcomm EHCI 2016-04-01 17:18:11 -04:00
Makefile ehci: Add support for Qualcomm EHCI 2016-04-01 17:18:11 -04:00
dwc2.c usb: dwc2: Add delay to fix the USB detection problem on SoCFPGA 2016-05-06 20:06:56 +02:00
dwc2.h usb: dwc2: disable erroneous overcurrent condition 2016-03-05 02:21:36 +01:00
ehci-armada100.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-atmel.c drivers: usb: atmel: clean up the UTMI PLL code 2016-02-18 21:34:41 +01:00
ehci-exynos.c usb: host: ehci: samsung: Move hcor initialization after usb phy setup 2015-12-17 21:54:41 +01:00
ehci-faraday.c dm: usb: Drop the EHCI weak functions 2015-04-18 11:11:24 -06:00
ehci-fsl.c drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file 2016-04-10 17:18:42 +02:00
ehci-generic.c usb: ehci: Use map_physmem in ehci-generic 2016-02-24 19:12:32 +01:00
ehci-hcd.c usb: ehci-hcd: Fix crash when no ops are provided to ehci_register() 2016-04-10 17:18:42 +02:00
ehci-marvell.c usb: ehci-marvell.c: Add DM support 2015-10-21 02:25:01 +02:00
ehci-mpc512x.c ehci-ci.h: drop generic USBCMD fields 2016-04-01 17:18:11 -04:00
ehci-msm.c ehci: Add support for Qualcomm EHCI 2016-04-01 17:18:11 -04:00
ehci-mx5.c usb: Rename ehci-fsl.h to ehci-ci.h 2016-04-01 17:18:10 -04:00
ehci-mx6.c usb: ehci-mx6: allow board_ehci_hcd_init to fail 2016-05-06 18:33:26 +02:00
ehci-mxc.c usb: Rename ehci-fsl.h to ehci-ci.h 2016-04-01 17:18:10 -04:00
ehci-mxs.c usb: ehci: mxs: Add board-specific callbacks 2014-09-29 09:02:16 +02:00
ehci-omap.c usb: ehci-omap: Reset the USB Host OMAP module 2013-12-06 07:02:32 -05:00
ehci-pci.c dm: usb: Add a compatible string for PCI EHCI controller 2016-01-24 12:07:19 +08:00
ehci-ppc4xx.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-rmobile.c usb: rmobile: Use ARRAY_SIZE(usb_base_address) instead of CONFIG_USB_MAX_CONTROLLER_COUNT 2014-11-07 16:32:02 +01:00
ehci-spear.c usb: spear: Add support for both SPEAr600 EHCI controllers 2015-08-19 22:30:20 +02:00
ehci-sunxi.c sunxi: H3: Do not clear usb companion clk-gate / reset on remove 2016-04-12 08:58:03 +02:00
ehci-tegra.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
ehci-vct.c usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init. 2013-10-20 23:46:27 +02:00
ehci-vf.c usb: Rename ehci-fsl.h to ehci-ci.h 2016-04-01 17:18:10 -04:00
ehci-zynq.c usb: Rename ehci-fsl.h to ehci-ci.h 2016-04-01 17:18:10 -04:00
ehci.h ehci-hcd: Add init_after_reset 2016-04-01 17:18:08 -04:00
isp116x-hcd.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
isp116x.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-at91.c drivers: usb: ohci-at91: clean up the PLLB code 2016-02-18 21:34:41 +01:00
ohci-da8xx.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ohci-ep93xx.c arm: ep9315: Return back Cirrus Logic EDB9315A board support 2014-07-04 23:45:48 +02:00
ohci-generic.c usb: add support of generic OHCI devices 2015-12-17 21:54:41 +01:00
ohci-hcd.c ohci: Add missing cache-flush for hcca area 2015-11-03 17:29:33 +01:00
ohci-lpc32xx.c usb: ohci-lpc32xx: Use shared wait_for_bit 2016-01-25 10:39:49 -05:00
ohci-s3c24xx.c include: move various macros to include/linux/kernel.h 2014-11-20 11:28:25 -05:00
ohci-s3c24xx.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
ohci-sunxi.c sunxi: H3: Do not clear usb companion clk-gate / reset on remove 2016-04-12 08:58:03 +02:00
ohci.h usb: ohci: enable cache support 2015-08-12 20:47:48 -04:00
r8a66597-hcd.c Move console definitions into a new console.h file 2015-11-19 20:27:50 -07:00
r8a66597.h usb: Update some EHCI driver licenses to use SPDX 2015-07-21 17:39:38 -06:00
sl811-hcd.c usb: add enum usb_init_type parameter to usb_lowlevel_init 2013-10-20 23:45:26 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
usb-sandbox.c usb: sandbox: Add support for interrupt operations 2015-11-19 20:27:52 -07:00
usb-uclass.c dm: usb: Unbind old block devices when shutting down USB 2016-03-17 21:27:39 -06:00
utmi-armada100.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
xhci-dwc3.c usb: xhci: dwc3: Adding reset delay requirement as per dwc3 databook 2015-12-07 00:15:00 +01:00
xhci-exynos5.c dm: Use dev_get_addr() where possible 2015-08-31 07:57:26 -06:00
xhci-fsl.c usb: xhci: fsl: Removing unused function usb_phy_reset 2015-12-07 00:15:00 +01:00
xhci-keystone.c usb: xhci: keystone: Remove common dwc3 drv functions calls 2015-07-22 08:55:44 +02:00
xhci-mem.c dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00
xhci-omap.c usb: host: xhci-omap: fix build break 2015-12-07 00:14:59 +01:00
xhci-pci.c usb: pci: Add XHCI driver for PCI 2015-02-05 22:16:42 -07:00
xhci-ring.c dm: usb: xhci: Use a function to get xhci_ctrl 2015-04-18 11:11:28 -06:00
xhci-uniphier.c ARM: UniPhier: replace <asm/io.h> with <linux/io.h> 2015-05-31 02:53:56 +09:00
xhci-zynqmp.c usb: xhci: zynqmp: Removing unused function usb_phy_reset 2015-12-07 00:15:00 +01:00
xhci.c usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION. 2016-03-20 18:00:45 +01:00
xhci.h dm: usb: Support driver model in XHCI 2015-04-18 11:11:28 -06:00