u-boot/board/edb93xx/pll_cfg.c
Matthias Kaehlcke cf3c142ee4 Add support for EDB93xx boards
Added support for the following EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-02-12 12:31:54 -06:00

59 lines
1.5 KiB
C

/*
* PLL setup for Cirrus edb93xx boards
*
* Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
*
* Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include "pll_cfg.h"
#include "early_udelay.h"
void pll_cfg(void)
{
struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
/* setup PLL1 */
writel(CLKSET1_VAL, &syscon->clkset1);
/*
* flush the pipeline
* writing to CLKSET1 causes the EP93xx to enter standby for between
* 8 ms to 16 ms, until PLL1 stabilizes
*/
asm("nop");
asm("nop");
asm("nop");
asm("nop");
asm("nop");
/* setup PLL2 */
writel(CLKSET2_VAL, &syscon->clkset2);
/*
* the user's guide recommends to wait at least 1 ms for PLL2 to
* stabilize
*/
early_udelay(1000);
}