Add parameters to the OMAP MMC initialization function so the board can mask host capabilities and set the maximum clock frequency. While the OMAP supports a certain set of MMC host capabilities, individual boards may be more restricted and the OMAP may need to be configured to match the board. The PRG_SDMMC1_SPEEDCTRL bit in the OMAP3 is an example. Signed-off-by: Jonathan Solnit <jsolnit@gmail.com>
170 lines
4.2 KiB
C
170 lines
4.2 KiB
C
/*
|
|
* MATRIX VISION GmbH mvBlueLYNX-X
|
|
*
|
|
* Derived from Beagle and Overo
|
|
*
|
|
* (C) Copyright 2004-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Sunil Kumar <sunilsaini05@gmail.com>
|
|
* Shashi Ranjan <shashiranjanmca05@gmail.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <twl4030.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include "mvblx.h"
|
|
#include "fpga.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
static void setup_net_chip(void);
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
/*
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
|
/* boot param addr */
|
|
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: misc_init_r
|
|
* Description: Configure board specific parts
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
printf("mvBlueLYNX-X\n");
|
|
if (get_cpu_family() == CPU_OMAP36XX)
|
|
setenv("mpurate", "1000");
|
|
else
|
|
setenv("mpurate", "600");
|
|
|
|
twl4030_power_init();
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
setup_net_chip();
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
mvblx_init_fpga();
|
|
|
|
mac_read_from_eeprom();
|
|
|
|
dieid_num_r();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers specific to the
|
|
* hardware. Many pins need to be moved from protect to primary
|
|
* mode.
|
|
*/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
MUX_MVBLX();
|
|
}
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
omap_mmc_init(0, 0, 0);
|
|
omap_mmc_init(1, 0, 0);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
/*
|
|
* Routine: setup_net_chip
|
|
* Description: Setting up the configuration GPMC registers specific to the
|
|
* Ethernet hardware.
|
|
*/
|
|
static void setup_net_chip(void)
|
|
{
|
|
struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
|
|
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
|
|
/* Configure GPMC registers */
|
|
writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1);
|
|
writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2);
|
|
writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3);
|
|
writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4);
|
|
writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5);
|
|
writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6);
|
|
writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7);
|
|
|
|
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
|
|
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
|
|
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
|
|
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
|
|
&ctrl_base->gpmc_nadv_ale);
|
|
|
|
/* Make GPIO 139 as output pin */
|
|
writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe);
|
|
|
|
/* Now send a pulse on the GPIO pin */
|
|
writel(GPIO11, &gpio5_base->setdataout);
|
|
udelay(1);
|
|
writel(GPIO11, &gpio5_base->cleardataout);
|
|
udelay(1);
|
|
writel(GPIO11, &gpio5_base->setdataout);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_SMC911X
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
int overwrite_console(void)
|
|
{
|
|
/* return TRUE if console should be overwritten */
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_CMD_NET */
|