u-boot/board/bf537-stamp/bf537-stamp.c
Mike Frysinger 3f390e15a7 Blackfin: bf537-stamp: use common spi boot workaround code
The common gpio code provides a function for handling the spi boot
workaround logic, so switch over to that rather than bang on the
gpio MMRs directly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-05 05:30:08 -04:00

107 lines
2.6 KiB
C

/*
* U-boot - main board file
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
#include <asm/net.h>
#include <net.h>
#include <asm/mach-common/bits/bootrom.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
printf("Board: ADI BF537 stamp board\n");
printf(" Support: http://blackfin.uclinux.org/\n");
return 0;
}
void board_reset(void)
{
/* workaround for weak pull ups on ssel */
if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
bfin_reset_boot_spi_cs(GPIO_PF10);
}
#ifdef CONFIG_BFIN_MAC
static void board_init_enetaddr(uchar *mac_addr)
{
#ifdef CONFIG_SYS_NO_FLASH
# define USE_MAC_IN_FLASH 0
#else
# define USE_MAC_IN_FLASH 1
#endif
bool valid_mac = false;
if (USE_MAC_IN_FLASH) {
/* we cram the MAC in the last flash sector */
uchar *board_mac_addr = (uchar *)0x203F0000;
if (is_valid_ether_addr(board_mac_addr)) {
memcpy(mac_addr, board_mac_addr, 6);
valid_mac = true;
}
}
if (!valid_mac) {
puts("Warning: Generating 'random' MAC address\n");
bfin_gen_rand_mac(mac_addr);
}
eth_setenv_enetaddr("ethaddr", mac_addr);
}
int board_eth_init(bd_t *bis)
{
return bfin_EMAC_initialize(bis);
}
#endif
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
#ifdef CONFIG_BFIN_MAC
uchar enetaddr[6];
if (!eth_getenv_enetaddr("ethaddr", enetaddr))
board_init_enetaddr(enetaddr);
#endif
#ifndef CONFIG_SYS_NO_FLASH
/* we use the last sector for the MAC address / POST LDR */
extern flash_info_t flash_info[];
flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
#endif
#ifdef CONFIG_BFIN_IDE
cf_ide_init();
#endif
return 0;
}