u-boot/board/shannon/flash.c
Jean-Christophe PLAGNIOL-VILLARD 6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00

474 lines
10 KiB
C

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
ulong myflush(void);
#define FLASH_BANK_SIZE 0x400000 /* 4 MB */
#define MAIN_SECT_SIZE 0x20000 /* 128 KB */
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
#define CMD_READ_ARRAY 0x00F000F0
#define CMD_UNLOCK1 0x00AA00AA
#define CMD_UNLOCK2 0x00550055
#define CMD_ERASE_SETUP 0x00800080
#define CMD_ERASE_CONFIRM 0x00300030
#define CMD_PROGRAM 0x00A000A0
#define CMD_UNLOCK_BYPASS 0x00200020
#define MEM_FLASH_ADDR1 (*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 2)))
#define MEM_FLASH_ADDR2 (*(volatile u32 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 2)))
#define BIT_ERASE_DONE 0x00800080
#define BIT_RDY_MASK 0x00800080
#define BIT_PROGRAM_ERROR 0x00200020
#define BIT_TIMEOUT 0x80000000 /* our flag */
#define READY 1
#define ERR 2
#define TMO 4
/*-----------------------------------------------------------------------
*/
ulong flash_init(void)
{
int i, j;
ulong size = 0;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
{
ulong flashbase = 0;
flash_info[i].flash_id =
(AMD_MANUFACT & FLASH_VENDMASK) |
(AMD_ID_LV160B & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
if (i == 0)
flashbase = PHYS_FLASH_1;
else
panic("configured too many flash banks!\n");
for (j = 0; j < flash_info[i].sector_count; j++)
{
if (j <= 3)
{
/* 1st one is 32 KB */
if (j == 0)
{
flash_info[i].start[j] = flashbase + 0;
}
/* 2nd and 3rd are both 16 KB */
if ((j == 1) || (j == 2))
{
flash_info[i].start[j] = flashbase + 0x8000 + (j-1)*0x4000;
}
/* 4th 64 KB */
if (j == 3)
{
flash_info[i].start[j] = flashbase + 0x10000;
}
}
else
{
flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE;
}
}
size += flash_info[i].size;
}
/*
* Protect monitor and environment sectors
* Inferno is complicated, it's hardware locked
*/
#ifdef CONFIG_INFERNO
/* first one, 0x00000 to 0x07fff */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE + 0x00000,
CONFIG_SYS_FLASH_BASE + 0x08000 - 1,
&flash_info[0]);
/* third to 10th, 0x0c000 - 0xdffff */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE + 0x0c000,
CONFIG_SYS_FLASH_BASE + 0xe0000 - 1,
&flash_info[0]);
#else
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
#endif
return size;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
switch (info->flash_id & FLASH_VENDMASK)
{
case (AMD_MANUFACT & FLASH_VENDMASK):
printf("AMD: ");
break;
default:
printf("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK)
{
case (AMD_ID_LV160B & FLASH_TYPEMASK):
printf("2x Amd29F160BB (16Mbit)\n");
break;
default:
printf("Unknown Chip Type\n");
goto Done;
break;
}
printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++)
{
if ((i % 5) == 0)
{
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
Done:
;
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
ulong result;
int iflag, cflag, prot, sect;
int rc = ERR_OK;
int chip1, chip2;
/* first look for protection bits */
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
if ((s_first < 0) || (s_first > s_last)) {
return ERR_INVAL;
}
if ((info->flash_id & FLASH_VENDMASK) !=
(AMD_MANUFACT & FLASH_VENDMASK)) {
return ERR_UNKNOWN_FLASH_VENDOR;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
return ERR_PROTECTED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status();
icache_disable();
iflag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
{
printf("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
if (info->protect[sect] == 0)
{ /* not protected */
vu_long *addr = (vu_long *)(info->start[sect]);
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
*addr = CMD_ERASE_CONFIRM;
/* wait until flash is ready */
chip1 = chip2 = 0;
do
{
result = *addr;
/* check timeout */
if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
{
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
}
if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
chip1 = READY;
if (!chip1 && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
chip1 = ERR;
if (!chip2 && (result >> 16) & BIT_ERASE_DONE)
chip2 = READY;
if (!chip2 && (result >> 16) & BIT_PROGRAM_ERROR)
chip2 = ERR;
} while (!chip1 || !chip2);
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
if (chip1 == ERR || chip2 == ERR)
{
rc = ERR_PROG_ERROR;
goto outahere;
}
if (chip1 == TMO)
{
rc = ERR_TIMOUT;
goto outahere;
}
printf("ok.\n");
}
else /* it was protected */
{
printf("protected!\n");
}
}
if (ctrlc())
printf("User Interrupt!\n");
outahere:
/* allow flash to settle - wait 10 ms */
udelay_masked(10000);
if (iflag)
enable_interrupts();
if (cflag)
icache_enable();
return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash
*/
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
vu_long *addr = (vu_long *)dest;
ulong result;
int rc = ERR_OK;
int cflag, iflag;
int chip1, chip2;
/*
* Check if Flash is (sufficiently) erased
*/
result = *addr;
if ((result & data) != data)
return ERR_NOT_ERASED;
/*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
* (ticker) exception to happen while the flash
* chip is in programming mode.
*/
cflag = icache_status();
icache_disable();
iflag = disable_interrupts();
MEM_FLASH_ADDR1 = CMD_UNLOCK1;
MEM_FLASH_ADDR2 = CMD_UNLOCK2;
MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
*addr = CMD_PROGRAM;
*addr = data;
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
/* wait until flash is ready */
chip1 = chip2 = 0;
do
{
result = *addr;
/* check timeout */
if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT)
{
chip1 = ERR | TMO;
break;
}
if (!chip1 && ((result & 0x80) == (data & 0x80)))
chip1 = READY;
if (!chip1 && ((result & 0xFFFF) & BIT_PROGRAM_ERROR))
{
result = *addr;
if ((result & 0x80) == (data & 0x80))
chip1 = READY;
else
chip1 = ERR;
}
if (!chip2 && ((result & (0x80 << 16)) == (data & (0x80 << 16))))
chip2 = READY;
if (!chip2 && ((result >> 16) & BIT_PROGRAM_ERROR))
{
result = *addr;
if ((result & (0x80 << 16)) == (data & (0x80 << 16)))
chip2 = READY;
else
chip2 = ERR;
}
} while (!chip1 || !chip2);
*addr = CMD_READ_ARRAY;
if (chip1 == ERR || chip2 == ERR || *addr != data)
rc = ERR_PROG_ERROR;
if (iflag)
enable_interrupts();
if (cflag)
icache_enable();
return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int l;
int i, rc;
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
for (; i<4 && cnt>0; ++i) {
data = (data >> 8) | (*src++ << 24);
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = *((vu_long*)src);
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
src += 4;
wp += 4;
cnt -= 4;
}
if (cnt == 0) {
return ERR_OK;
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
data = (data >> 8) | (*src++ << 24);
--cnt;
}
for (; i<4; ++i, ++cp) {
data = (data >> 8) | (*(uchar *)cp << 24);
}
return write_word(info, wp, data);
}