u-boot/drivers/power/twl6030.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

179 lines
4.1 KiB
C

/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#ifdef CONFIG_TWL6030_POWER
#include <twl6030.h>
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
u8 msb = 0;
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
GPCH0_LSB + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
GPCH0_MSB + channel_no * 2, &msb);
if (ret)
return ret;
return (msb << 8) | lsb;
}
static int twl6030_gpadc_sw2_trigger(void)
{
u8 val;
int ret = 0;
ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
if (ret)
return ret;
/* Waiting until the SW1 conversion ends*/
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
if (ret)
return ret;
udelay(1000);
}
return 0;
}
void twl6030_stop_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0);
return;
}
void twl6030_start_usb_charging(void)
{
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_INT_MASK, MBAT_TEMP);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400);
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM);
/* Enable USB charging */
twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER,
CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER);
return;
}
int twl6030_get_battery_current(void)
{
int battery_current = 0;
u8 msb = 0;
u8 lsb = 0;
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb);
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb);
battery_current = ((msb << 8) | lsb);
/* convert 10 bit signed number to 16 bit signed number */
if (battery_current >= 0x2000)
battery_current = (battery_current - 0x4000);
battery_current = battery_current * 3000 / 4096;
printf("Battery Current: %d mA\n", battery_current);
return battery_current;
}
int twl6030_get_battery_voltage(void)
{
int battery_volt = 0;
int ret = 0;
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
if (ret) {
printf("Failed to convert battery voltage\n");
return ret;
}
/* measure Vbat voltage */
battery_volt = twl6030_gpadc_read_channel(7);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
}
void twl6030_init_battery_charging(void)
{
u8 stat1 = 0;
int battery_volt = 0;
int ret = 0;
/* Enable VBAT measurement */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
if (ret) {
printf("Failed to enable GPADC\n");
return;
}
battery_volt = twl6030_get_battery_voltage();
if (battery_volt < 0)
return;
if (battery_volt < 3000)
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
/* check for battery presence indirectly via Fuel gauge */
if ((stat1 & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
}
void twl6030_power_mmc_init()
{
/* set voltage to 3.0 and turnon for APP */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15);
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21);
}
void twl6030_usb_device_settings()
{
u8 data = 0;
/* Select APP Group and set state to ON */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21);
twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data);
data |= 0x10;
/* Select the input supply for VBUS regulator */
twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data);
}
#endif