u-boot/board/esd/common/s1d13704_320_240_4bpp.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

45 lines
2.5 KiB
C

/*
* Copyright (c) 2000,2001 Epson Research and Development, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*
* Generic Header information generated by 13704CFG.EXE (Build 10)
* Panel: 320x240x4bpp 78Hz Mono 4-Bit STN, Disabled (PCLK=6.666MHz)
*/
static S1D_REGS regs_13704_320_240_4bpp[] =
{
{ 0x00, 0x00 }, /* Revision Code Register */
{ 0x01, 0x04 }, /*00*/ /* Mode Register 0 Register */
{ 0x02, 0xA4 }, /*a0*/ /* Mode Register 1 Register */
{ 0x03, 0x83 }, /*03*/ /* Mode Register 2 Register - bit7 is LUT bypass */
{ 0x04, 0x27 }, /* Horizontal Panel Size Register */
{ 0x05, 0xEF }, /* Vertical Panel Size Register (LSB) */
{ 0x06, 0x00 }, /* Vertical Panel Size Register (MSB) */
{ 0x07, 0x00 }, /* FPLINE Start Position Register */
{ 0x08, 0x00 }, /* Horizontal Non-Display Period Register */
{ 0x09, 0x00 }, /* FPFRAME Start Position Register */
{ 0x0A, 0x02 }, /* Vertical Non-Display Period Register */
{ 0x0B, 0x00 }, /* MOD Rate Register */
{ 0x0C, 0x00 }, /* Screen 1 Start Address Register (LSB) */
{ 0x0D, 0x00 }, /* Screen 1 Start Address Register (MSB) */
{ 0x0E, 0x00 }, /* Not Used */
{ 0x0F, 0x00 }, /* Screen 2 Start Address Register (LSB) */
{ 0x10, 0x00 }, /* Screen 2 Start Address Register (MSB) */
{ 0x11, 0x00 }, /* Not Used */
{ 0x12, 0x00 }, /* Memory Address Offset Register */
{ 0x13, 0xFF }, /* Screen 1 Vertical Size Register (LSB) */
{ 0x14, 0x03 }, /* Screen 1 Vertical Size Register (MSB) */
{ 0x15, 0x00 }, /* Look-Up Table Address Register */
{ 0x16, 0x00 }, /* Look-Up Table Bank Select Register */
{ 0x17, 0x00 }, /* Look-Up Table Data Register */
{ 0x18, 0x01 }, /* GPIO Configuration Control Register */
{ 0x19, 0x01 }, /* GPIO Status/Control Register */
{ 0x1A, 0x00 }, /* Scratch Pad Register */
{ 0x1B, 0x00 }, /* SwivelView Mode Register */
{ 0x1C, 0xA0 }, /* Line Byte Count Register */
{ 0x1D, 0x00 }, /* Not Used */
{ 0x1E, 0x00 }, /* Not Used */
{ 0x1F, 0x00 }, /* Not Used */
};