u-boot/board/cogent/lcd.h
Wolfgang Denk 53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00

85 lines
3.5 KiB
C

/* most of this is taken from the file */
/* hal/powerpc/cogent/current/src/hal_diag.c in the */
/* Cygnus eCos source. Here is the copyright notice: */
/* */
/*============================================================================= */
/* */
/* hal_diag.c */
/* */
/* HAL diagnostic output code */
/* */
/*============================================================================= */
/*####COPYRIGHTBEGIN#### */
/* */
/* ------------------------------------------- */
/* The contents of this file are subject to the Cygnus eCos Public License */
/* Version 1.0 (the "License"); you may not use this file except in */
/* compliance with the License. You may obtain a copy of the License at */
/* http://sourceware.cygnus.com/ecos */
/* */
/* Software distributed under the License is distributed on an "AS IS" */
/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the */
/* License for the specific language governing rights and limitations under */
/* the License. */
/* */
/* The Original Code is eCos - Embedded Cygnus Operating System, released */
/* September 30, 1998. */
/* */
/* The Initial Developer of the Original Code is Cygnus. Portions created */
/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions. All Rights Reserved. */
/* ------------------------------------------- */
/* */
/*####COPYRIGHTEND#### */
/*============================================================================= */
/*#####DESCRIPTIONBEGIN#### */
/* */
/* Author(s): nickg, jskov */
/* Contributors: nickg, jskov */
/* Date: 1999-03-23 */
/* Purpose: HAL diagnostic output */
/* Description: Implementations of HAL diagnostic output support. */
/* */
/*####DESCRIPTIONEND#### */
/* */
/*============================================================================= */
/* FEMA 162B 16 character x 2 line LCD */
/* status register bit definitions */
#define LCD_STAT_BUSY 0x80 /* 1 = display busy */
#define LCD_STAT_ADD 0x7F /* bits 0-6 return current display address */
/* command register definitions */
#define LCD_CMD_RST 0x01 /* clear entire display and reset display addr */
#define LCD_CMD_HOME 0x02 /* reset display address and reset any shifting */
#define LCD_CMD_ECL 0x04 /* move cursor left one pos on next data write */
#define LCD_CMD_ESL 0x05 /* shift display left one pos on next data write */
#define LCD_CMD_ECR 0x06 /* move cursor right one pos on next data write */
#define LCD_CMD_ESR 0x07 /* shift disp right one pos on next data write */
#define LCD_CMD_DOFF 0x08 /* display off, cursor off, blinking off */
#define LCD_CMD_BL 0x09 /* blink character at current cursor position */
#define LCD_CMD_CUR 0x0A /* enable cursor on */
#define LCD_CMD_DON 0x0C /* turn display on */
#define LCD_CMD_CL 0x10 /* move cursor left one position */
#define LCD_CMD_SL 0x14 /* shift display left one position */
#define LCD_CMD_CR 0x18 /* move cursor right one position */
#define LCD_CMD_SR 0x1C /* shift display right one position */
#define LCD_CMD_MODE 0x38 /* sets 8 bits, 2 lines, 5x7 characters */
#define LCD_CMD_ACG 0x40 /* bits 0-5 sets character generator address */
#define LCD_CMD_ADD 0x80 /* bits 0-6 sets display data addr to line 1 + */
/* LCD status values */
#define LCD_OK 0x00
#define LCD_ERR 0x01
#define LCD_LINE0 0x00
#define LCD_LINE1 0x40
#define LCD_LINE_LENGTH 16
extern void lcd_init(void);
extern void lcd_write_char(const char);
extern void lcd_flush(void);
extern void lcd_write_string(const char *);
extern void lcd_printf(const char *, ...);