u-boot/board/karo/tx25/lowlevel_init.S
John Rigby 6895d4510a Add support for KARO TX25 board
This is an i.MX25 base board with only NAND
so it uses nand_spl to boot.

Signed-off-by: John Rigby <jcrigby@gmail.com>

Tune configuration, add support for (redundant) environment in NAND.
Signed-off-by: Wolfgang Denk <wd@denx.de>

Acked-by: Wolfgang Denk <wd@denx.de>
CC: Fred Fan <fanyefeng@gmail.com>
CC: Tom <Tom.Rix@windriver.com>
2010-03-07 12:36:36 -06:00

132 lines
3.1 KiB
ArmAsm

/*
* (C) Copyright 2009 DENX Software Engineering
* Author: John Rigby <jrigby@gmail.com>
*
* Based on U-Boot and RedBoot sources for several different i.mx
* platforms.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/macro.h>
.macro init_aips
write32 0x43f00000, 0x77777777
write32 0x43f00004, 0x77777777
write32 0x43f00000, 0x77777777
write32 0x53f00004, 0x77777777
.endm
.macro init_max
write32 0x43f04000, 0x43210
write32 0x43f04100, 0x43210
write32 0x43f04200, 0x43210
write32 0x43f04300, 0x43210
write32 0x43f04400, 0x43210
write32 0x43f04010, 0x10
write32 0x43f04110, 0x10
write32 0x43f04210, 0x10
write32 0x43f04310, 0x10
write32 0x43f04410, 0x10
write32 0x43f04800, 0x0
write32 0x43f04900, 0x0
write32 0x43f04a00, 0x0
write32 0x43f04b00, 0x0
write32 0x43f04c00, 0x0
.endm
.macro init_m3if
write32 0xb8003000, 0x1
.endm
.macro init_clocks
/*
* clocks
*
* first enable CLKO debug output
* 0x40000000 enables the debug CLKO signal
* 0x05000000 sets CLKO divider to 6
* 0x00600000 makes CLKO parent clk the USB clk
*/
write32 0x53f80064, 0x45600000
write32 0x53f80008, 0x20034000
/*
* enable all implemented clocks in all three
* clock control registers
*/
write32 0x53f8000c, 0x1fffffff
write32 0x53f80010, 0xffffffff
write32 0x53f80014, 0xfdfff
.endm
.macro init_ddrtype
/*
* ddr_type is 3.3v SDRAM
*/
write32 0x43fac454, 0x800
.endm
/*
* sdram controller init
*/
.macro init_sdram_bank bankaddr, ctl, cfg
ldr r0, =0xb8001000
ldr r2, =\bankaddr
/*
* reset SDRAM controller
* then wait for initialization to complete
*/
ldr r1, =(1 << 1)
str r1, [r0, #0x10]
1: ldr r3, [r0, #0x10]
tst r3, #(1 << 31)
beq 1b
ldr r1, =0x95728
str r1, [r0, #\cfg] /* config */
ldr r1, =0x92116480 /* control | precharge */
str r1, [r0, #\ctl] /* write command to controller */
str r1, [r2, #0x400] /* command encoded in address */
ldr r1, =0xa2116480 /* auto refresh */
str r1, [r0, #\ctl]
ldrb r3, [r2] /* read dram twice to auto refresh */
ldrb r3, [r2]
ldr r1, =0xb2116480 /* control | load mode */
str r1, [r0, #\ctl] /* write command to controller */
strb r1, [r2, #0x33] /* command encoded in address */
ldr r1, =0x82116480 /* control | normal (0)*/
str r1, [r0, #\ctl] /* write command to controller */
.endm
.globl lowlevel_init
lowlevel_init:
init_aips
init_max
init_m3if
init_clocks
init_sdram_bank 0x80000000, 0x0, 0x4
init_sdram_bank 0x90000000, 0x8, 0xc
mov pc, lr