u-boot/cpu/mpc8220/dramSetup.h
wdenk 983fda8391 Patch by TsiChung Liew, 23 Sep 2004:
- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards
2004-10-28 00:09:35 +00:00

109 lines
3.8 KiB
C

/*
* dramSetup.h
*
* Prototypes, etc. for the Motorola MPC8220
* embedded cpu chips
*
* 2004 (c) Freescale, Inc.
* Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __INCdramsetuph
#define __INCdramsetuph
#ifndef __ASSEMBLY__
/* Where various things are in the SPD */
#define LOC_TYPE 2
#define LOC_CHECKSUM 63
#define LOC_PHYS_BANKS 5
#define LOC_LOGICAL_BANKS 17
#define LOC_ROWS 3
#define LOC_COLS 4
#define LOC_WIDTH_HIGH 7
#define LOC_WIDTH_LOW 6
#define LOC_REFRESH 12
#define LOC_BURSTS 16
#define LOC_CAS 18
#define LOC_CS 19
#define LOC_WE 20
#define LOC_Tcyc 9
#define LOC_Tac 10
#define LOC_Trp 27
#define LOC_Trrd 28
#define LOC_Trcd 29
#define LOC_Tras 30
#define LOC_Buffered 21
/* Types of memory the SPD can tell us about.
* We can actually only use SDRAM and DDR.
*/
#define TYPE_DRAM 1 /* plain old dram */
#define TYPE_EDO 2 /* EDO dram */
#define TYPE_Nibble 3 /* serial nibble memory */
#define TYPE_SDR 4 /* SDRAM */
#define TYPE_ROM 5 /* */
#define TYPE_SGRRAM 6 /* graphics memory */
#define TYPE_DDR 7 /* DDR sdram */
#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */
#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */
#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */
#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */
#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */
#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */
#define DRIVE_STRENGTH_HIGH 0
#define DRIVE_STRENGTH_MED 1
#define DRIVE_STRENGTH_LOW 2
#define DRIVE_STRENGTH_OFF 3
#define OK 0
#define ERROR -1
/* Structure to hold information about address muxing. */
typedef struct tagMuxDescriptor {
u8 MuxValue;
u8 Columns;
u8 Rows;
u8 MoreColumns;
} muxdesc_t;
/* Structure to define one physical bank of
* memory. Note that dram size in bytes is
* (2^^(rows+columns)) * width * banks / 8
*/
typedef struct tagDramInfo {
u32 size; /* size in bytes */
u32 base; /* base address */
u8 ordinal; /* where in the memory map will we put this */
u8 type;
u8 rows;
u8 cols;
u16 width; /* width of each chip in bits */
u8 banks; /* number of chips, aka logical banks */
u8 bursts; /* bit-encoded allowable burst length */
u8 CAS; /* bit-encoded CAS latency values */
u8 CS; /* bit-encoded CS latency values */
u8 WE; /* bit-encoded WE latency values */
u8 Trp; /* bit-encoded row precharge time */
u8 Trcd; /* bit-encoded RAS to CAS delay */
u8 buffered; /* buffered or not */
u8 refresh; /* encoded refresh rate */
} draminfo_t;
#endif /* __ASSEMBLY__ */
#endif /* __INCdramsetuph */