u-boot/drivers/serial/altera_uart.c
Scott McNutt 3ea0037f23 nios2: Fix outx/writex parameter order in io.h
The outx/writex macros were using writex(addr, val) rather than
   the standard writex(val, addr), resulting in incompatibilty with
   architecture independent components. This change set uses standard
   parameter order.

Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-04-02 12:28:41 -04:00

95 lines
2.2 KiB
C

/*
* (C) Copyright 2004, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
#include <nios2-io.h>
DECLARE_GLOBAL_DATA_PTR;
/*------------------------------------------------------------------
* UART the serial port
*-----------------------------------------------------------------*/
static nios_uart_t *uart = (nios_uart_t *) CONFIG_SYS_NIOS_CONSOLE;
#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
/* Everything's already setup for fixed-baud PTF
* assignment
*/
void serial_setbrg (void){ return; }
int serial_init (void) { return (0);}
#else
void serial_setbrg (void)
{
unsigned div;
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
writel (div, &uart->divisor);
return;
}
int serial_init (void)
{
serial_setbrg ();
return (0);
}
#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
/*-----------------------------------------------------------------------
* UART CONSOLE
*---------------------------------------------------------------------*/
void serial_putc (char c)
{
if (c == '\n')
serial_putc ('\r');
while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
WATCHDOG_RESET ();
writel ((unsigned char)c, &uart->txdata);
}
void serial_puts (const char *s)
{
while (*s != 0) {
serial_putc (*s++);
}
}
int serial_tstc (void)
{
return (readl (&uart->status) & NIOS_UART_RRDY);
}
int serial_getc (void)
{
while (serial_tstc () == 0)
WATCHDOG_RESET ();
return (readl (&uart->rxdata) & 0x00ff );
}