u-boot/include/fsl_ddr.h
York Sun 34e026f9b1 driver/ddr/fsl: Add DDR4 support to Freescale DDR driver
Mostly reusing DDR3 driver, this patch adds DDR4 SPD handling, register
calculation and programming.

Signed-off-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:48 -07:00

120 lines
3.8 KiB
C

/*
* Copyright 2008-2014 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#ifndef FSL_DDR_MAIN_H
#define FSL_DDR_MAIN_H
#include <fsl_ddrc_version.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <common_timing_params.h>
#ifdef CONFIG_SYS_FSL_DDR_LE
#define ddr_in32(a) in_le32(a)
#define ddr_out32(a, v) out_le32(a, v)
#else
#define ddr_in32(a) in_be32(a)
#define ddr_out32(a, v) out_be32(a, v)
#endif
#define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR
u32 fsl_ddr_get_version(void);
#if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
/*
* Bind the main DDR setup driver's generic names
* to this specific DDR technology.
*/
static __inline__ int
compute_dimm_parameters(const generic_spd_eeprom_t *spd,
dimm_params_t *pdimm,
unsigned int dimm_number)
{
return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
}
#endif
/*
* Data Structures
*
* All data structures have to be on the stack
*/
#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
typedef struct {
generic_spd_eeprom_t
spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
struct dimm_params_s
dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
} fsl_ddr_info_t;
/* Compute steps */
#define STEP_GET_SPD (1 << 0)
#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
#define STEP_GATHER_OPTS (1 << 3)
#define STEP_ASSIGN_ADDRESSES (1 << 4)
#define STEP_COMPUTE_REGS (1 << 5)
#define STEP_PROGRAM_REGS (1 << 6)
#define STEP_ALL 0xFFF
unsigned long long
fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
unsigned int size_only);
const char *step_to_string(unsigned int step);
unsigned int compute_fsl_memctl_config_regs(const memctl_options_t *popts,
fsl_ddr_cfg_regs_t *ddr,
const common_timing_params_t *common_dimm,
const dimm_params_t *dimm_parameters,
unsigned int dbw_capacity_adjust,
unsigned int size_only);
unsigned int compute_lowest_common_dimm_parameters(
const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms);
unsigned int populate_memctl_options(int all_dimms_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num);
void check_interleaving_options(fsl_ddr_info_t *pinfo);
unsigned int mclk_to_picos(unsigned int mclk);
unsigned int get_memory_clk_period_ps(void);
unsigned int picos_to_mclk(unsigned int picos);
void fsl_ddr_set_lawbar(
const common_timing_params_t *memctl_common_params,
unsigned int memctl_interleaved,
unsigned int ctrl_num);
int fsl_ddr_interactive_env_var_exists(void);
unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set);
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
unsigned int ctrl_num);
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr);
void board_add_ram_info(int use_default);
/* processor specific function */
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num, int step);
/* board specific function */
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
unsigned int controller_number,
unsigned int dimm_number);
#endif