u-boot/include/spi_flash.h
Prabhakar Kushwaha 1eaa742d85 driver: Add support of image load for MMC & SPI in SPL
Add support of loading image, binary for MMC and SPI during SPL boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-04-22 17:58:50 -07:00

164 lines
4.4 KiB
C

/*
* Common SPI flash Interface
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#ifndef _SPI_FLASH_H_
#define _SPI_FLASH_H_
#include <spi.h>
#include <linux/types.h>
#include <linux/compiler.h>
/* sf param flags */
#define SECT_4K 1 << 1
#define SECT_32K 1 << 2
#define E_FSR 1 << 3
#define WR_QPP 1 << 4
/* Enum list - Full read commands */
enum spi_read_cmds {
ARRAY_SLOW = 1 << 0,
DUAL_OUTPUT_FAST = 1 << 1,
DUAL_IO_FAST = 1 << 2,
QUAD_OUTPUT_FAST = 1 << 3,
QUAD_IO_FAST = 1 << 4,
};
#define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
/* Dual SPI flash memories */
enum spi_dual_flash {
SF_SINGLE_FLASH = 0,
SF_DUAL_STACKED_FLASH = 1 << 0,
SF_DUAL_PARALLEL_FLASH = 1 << 1,
};
/**
* struct spi_flash_params - SPI/QSPI flash device params structure
*
* @name: Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
* @jedec: Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
* @ext_jedec: Device ext_jedec ID
* @sector_size: Sector size of this device
* @nr_sectors: No.of sectors on this device
* @e_rd_cmd: Enum list for read commands
* @flags: Important param, for flash specific behaviour
*/
struct spi_flash_params {
const char *name;
u32 jedec;
u16 ext_jedec;
u32 sector_size;
u32 nr_sectors;
u8 e_rd_cmd;
u16 flags;
};
extern const struct spi_flash_params spi_flash_params_table[];
/**
* struct spi_flash - SPI flash structure
*
* @spi: SPI slave
* @name: Name of SPI flash
* @dual_flash: Indicates dual flash memories - dual stacked, parallel
* @shift: Flash shift useful in dual parallel
* @size: Total flash size
* @page_size: Write (page) size
* @sector_size: Sector size
* @erase_size: Erase size
* @bank_read_cmd: Bank read cmd
* @bank_write_cmd: Bank write cmd
* @bank_curr: Current flash bank
* @poll_cmd: Poll cmd - for flash erase/program
* @erase_cmd: Erase cmd 4K, 32K, 64K
* @read_cmd: Read cmd - Array Fast, Extn read and quad read.
* @write_cmd: Write cmd - page and quad program.
* @dummy_byte: Dummy cycles for read operation.
* @memory_map: Address of read-only SPI flash access
* @read: Flash read ops: Read len bytes at offset into buf
* Supported cmds: Fast Array Read
* @write: Flash write ops: Write len bytes from buf into offset
* Supported cmds: Page Program
* @erase: Flash erase ops: Erase len bytes from offset
* Supported cmds: Sector erase 4K, 32K, 64K
* return 0 - Success, 1 - Failure
*/
struct spi_flash {
struct spi_slave *spi;
const char *name;
u8 dual_flash;
u8 shift;
u32 size;
u32 page_size;
u32 sector_size;
u32 erase_size;
#ifdef CONFIG_SPI_FLASH_BAR
u8 bank_read_cmd;
u8 bank_write_cmd;
u8 bank_curr;
#endif
u8 poll_cmd;
u8 erase_cmd;
u8 read_cmd;
u8 write_cmd;
u8 dummy_byte;
void *memory_map;
int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
int (*write)(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
};
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
/**
* Set up a new SPI flash from an fdt node
*
* @param blob Device tree blob
* @param slave_node Pointer to this SPI slave node in the device tree
* @param spi_node Cached pointer to the SPI interface this node belongs
* to
* @return 0 if ok, -1 on error
*/
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node);
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
size_t len, void *buf)
{
return flash->read(flash, offset, len, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
return flash->write(flash, offset, len, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
size_t len)
{
return flash->erase(flash, offset, len);
}
void spi_boot(void) __noreturn;
void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
#endif /* _SPI_FLASH_H_ */