u-boot/include/configs/pleb2.h
Jon Loeliger 079a136c35 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 10:12:10 -05:00

258 lines
7.6 KiB
C

/*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* Configuration settings for the PLEB 2 board.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_PXA250 1 /* This is an PXA255 CPU */
#define CONFIG_PLEB2 1 /* on an PLEB2 Board */
#undef CONFIG_LCD
#undef CONFIG_MMC
#define BOARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
/*
* Size of malloc() pool
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
* Hardware drivers
*/
/* None - PLEB 2 doesn't have any of this.
#define CONFIG_DRIVER_LAN91C96
#define CONFIG_LAN91C96_BASE 0x0C000000 */
/*
* select serial console configuration
*/
#define CONFIG_FFUART 1 /* we use FFUART on PLEB 2 */
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_NET
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 192.168.0.21
#define CONFIG_SERVERIP 192.168.0.250
#define CONFIG_BOOTCOMMAND "bootm 40000"
#define CONFIG_BOOTARGS "root=/dev/mtdblock2 prompt_ramdisk=0 load_ramdisk=1 console=ttyS0,115200"
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/*
* Miscellaneous configurable options
*/
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT "$ " /* Monitor Command Prompt */
#else
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#endif
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_DEVICE_NULLDEV 1
#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0xa2000000 /* default load address */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
#define PHYS_FLASH_SIZE 0x00800000 /* 4 MB */
/* Not entirely sure about this - DS/CHC */
#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
#define CFG_DRAM_BASE PHYS_SDRAM_1
#define CFG_DRAM_SIZE PHYS_SDRAM_1_SIZE
#define CFG_FLASH_BASE PHYS_FLASH_1
#define CFG_MONITOR_BASE CFG_FLASH_BASE
/*
* GPIO settings
*/
#define CFG_GPSR0_VAL 0x00000000 /* Don't set anything */
#define CFG_GPSR1_VAL 0x00000080
#define CFG_GPSR2_VAL 0x00000000
#define CFG_GPCR0_VAL 0x00000000 /* Don't clear anything */
#define CFG_GPCR1_VAL 0x00000000
#define CFG_GPCR2_VAL 0x00000000
#define CFG_GPDR0_VAL 0x00000000
#define CFG_GPDR1_VAL 0x000007C3
#define CFG_GPDR2_VAL 0x00000000
/* Edge detect registers (these are set by the kernel) */
#define CFG_GRER0_VAL 0x00000000
#define CFG_GRER1_VAL 0x00000000
#define CFG_GRER2_VAL 0x00000000
#define CFG_GFER0_VAL 0x00000000
#define CFG_GFER1_VAL 0x00000000
#define CFG_GFER2_VAL 0x00000000
#define CFG_GAFR0_L_VAL 0x00000000
#define CFG_GAFR0_U_VAL 0x00000000
#define CFG_GAFR1_L_VAL 0x00008010 /* Use FF UART Send and Receive */
#define CFG_GAFR1_U_VAL 0x00000000
#define CFG_GAFR2_L_VAL 0x00000000
#define CFG_GAFR2_U_VAL 0x00000000
#define CFG_PSSR_VAL 0x20
#define CFG_CCCR_VAL 0x00000141 /* 100 MHz memory, 200 MHz CPU */
#define CFG_CKEN_VAL 0x00000060 /* FFUART and STUART enabled */
#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */
/*
* Memory settings
*/
#define CFG_MSC0_VAL 0x00007FF0 /* Not properly calculated - FIXME (DS) */
#define CFG_MSC1_VAL 0x00000000
#define CFG_MSC2_VAL 0x00000000
#define CFG_MDCNFG_VAL 0x00000aC9 /* Memory timings for the SDRAM.
tRP=2, CL=2, tRCD=2, tRAS=5, tRC=8 */
#define CFG_MDREFR_VAL 0x00403018 /* Initial setting, individual */
/* bits set in lowlevel_init.S */
#define CFG_MDMRS_VAL 0x00000000
/*
* PCMCIA and CF Interfaces
*/
#define CFG_MECR_VAL 0x00000000 /* Hangover from Lubbock.
Needs calculating. (DS/CHC) */
#define CFG_MCMEM0_VAL 0x00010504
#define CFG_MCMEM1_VAL 0x00010504
#define CFG_MCATT0_VAL 0x00010504
#define CFG_MCATT1_VAL 0x00010504
#define CFG_MCIO0_VAL 0x00004715
#define CFG_MCIO1_VAL 0x00004715
/*
* FLASH and environment organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
/* timeout values are in ticks */
/* FIXME */
#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
/* Flash protection */
#define CFG_FLASH_PROTECTION 1
/* FIXME */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x3C000) /* Addr of Environment Sector */
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x20000
/* Option added to get around byte ordering issues in the flash driver */
#define CFG_LITTLE_ENDIAN 1
#endif /* __CONFIG_H */