u-boot/include/command.h
Simon Glass 87b6398b46 cli: hush: Adjust 'run' command to run each line of the env var
The run command treats each argument an an environment variable. It gets the
value of each variable and executes it as a command. If an environment
variable contains a newline and the hush cli is used, it is supposed to
execute each line one after the other.

Normally a newline signals to hush to exit - this is used in normal command
line entry - after a command is entered we want to return to allow the user
to enter the next one. But environment variables obviously need to execute
to completion.

Add a special case for the execution of environment variables which
continues when a newline is seen, and add a few tests to check this
behaviour.

Note: it's not impossible that this may cause regressions in other areas.
I can't think of a case but with any change of behaviour with limited test
coverage there is always a risk. From what I can tell this behaviour has
been around since at least U-Boot 2011.03, although this pre-dates sandbox
and I have not tested it on real hardware.

Reported-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-27 11:03:33 -04:00

185 lines
5.5 KiB
C

/*
* (C) Copyright 2000-2009
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Definitions for Command Processor
*/
#ifndef __COMMAND_H
#define __COMMAND_H
#include <linker_lists.h>
#ifndef NULL
#define NULL 0
#endif
/* Default to a width of 8 characters for help message command width */
#ifndef CONFIG_SYS_HELP_CMD_WIDTH
#define CONFIG_SYS_HELP_CMD_WIDTH 8
#endif
#ifndef __ASSEMBLY__
/*
* Monitor Command Table
*/
struct cmd_tbl_s {
char *name; /* Command Name */
int maxargs; /* maximum number of arguments */
int repeatable; /* autorepeat allowed? */
/* Implementation function */
int (*cmd)(struct cmd_tbl_s *, int, int, char * const []);
char *usage; /* Usage message (short) */
#ifdef CONFIG_SYS_LONGHELP
char *help; /* Help message (long) */
#endif
#ifdef CONFIG_AUTO_COMPLETE
/* do auto completion on the arguments */
int (*complete)(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
#endif
};
typedef struct cmd_tbl_s cmd_tbl_t;
#if defined(CONFIG_CMD_RUN)
extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
/* common/command.c */
int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int
flag, int argc, char * const argv[]);
cmd_tbl_t *find_cmd(const char *cmd);
cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len);
extern int cmd_usage(const cmd_tbl_t *cmdtp);
#ifdef CONFIG_AUTO_COMPLETE
extern int var_complete(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]);
extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int *colp);
#endif
/**
* cmd_process_error() - report and process a possible error
*
* @cmdtp: Command which caused the error
* @err: Error code (0 if none, -ve for error, like -EIO)
* @return 0 if there is not error, 1 (CMD_RET_FAILURE) if an error is found
*/
int cmd_process_error(cmd_tbl_t *cmdtp, int err);
/*
* Monitor Command
*
* All commands use a common argument format:
*
* void function (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
*/
#if defined(CONFIG_CMD_MEMORY) \
|| defined(CONFIG_CMD_I2C) \
|| defined(CONFIG_CMD_ITEST) \
|| defined(CONFIG_CMD_PCI) \
|| defined(CONFIG_CMD_PORTIO)
#define CMD_DATA_SIZE
extern int cmd_get_data_size(char* arg, int default_size);
#endif
#ifdef CONFIG_CMD_BOOTD
extern int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#endif
#ifdef CONFIG_CMD_BOOTM
extern int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd);
#else
static inline int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
{
return 0;
}
#endif
extern int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
extern int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
char *const argv[]);
extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
/*
* Error codes that commands return to cmd_process(). We use the standard 0
* and 1 for success and failure, but add one more case - failure with a
* request to call cmd_usage(). But the cmd_process() function handles
* CMD_RET_USAGE itself and after calling cmd_usage() it will return 1.
* This is just a convenience for commands to avoid them having to call
* cmd_usage() all over the place.
*/
enum command_ret_t {
CMD_RET_SUCCESS, /* 0 = Success */
CMD_RET_FAILURE, /* 1 = Failure */
CMD_RET_USAGE = -1, /* Failure, please report 'usage' error */
};
/**
* Process a command with arguments. We look up the command and execute it
* if valid. Otherwise we print a usage message.
*
* @param flag Some flags normally 0 (see CMD_FLAG_.. above)
* @param argc Number of arguments (arg 0 must be the command text)
* @param argv Arguments
* @param repeatable This function sets this to 0 if the command is not
* repeatable. If the command is repeatable, the value
* is left unchanged.
* @param ticks If ticks is not null, this function set it to the
* number of ticks the command took to complete.
* @return 0 if the command succeeded, 1 if it failed
*/
int cmd_process(int flag, int argc, char * const argv[],
int *repeatable, unsigned long *ticks);
#endif /* __ASSEMBLY__ */
/*
* Command Flags:
*/
#define CMD_FLAG_REPEAT 0x0001 /* repeat last command */
#define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */
#define CMD_FLAG_ENV 0x0004 /* command is from the environment */
#ifdef CONFIG_AUTO_COMPLETE
# define _CMD_COMPLETE(x) x,
#else
# define _CMD_COMPLETE(x)
#endif
#ifdef CONFIG_SYS_LONGHELP
# define _CMD_HELP(x) x,
#else
# define _CMD_HELP(x)
#endif
#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, _comp) \
{ #_name, _maxargs, _rep, _cmd, _usage, \
_CMD_HELP(_help) _CMD_COMPLETE(_comp) }
#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \
U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, NULL)
#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
ll_entry_declare(cmd_tbl_t, _name, cmd) = \
U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
_usage, _help, _comp);
#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \
U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
#endif
#endif /* __COMMAND_H */